Dvir Rotem

Long-range charge transport in single G-quadruplex DNA molecules

DNA and DNA-based polymers are of interest in molecular electronics because of their versatile and programmable structures. However, transport measurements have produced a range of seemingly contradictory results due to differences in the measured molecules and experimental set-ups, and transporting significant current through individual DNA-based molecules remains a considerable challenge. Here, we report reproducible charge transport in guanine-quadruplex (G4) DNA molecules adsorbed on a mica substrate. Currents ranging from tens of picoamperes to more than 100 pA were measured in the G4-DNA over distances ranging from tens of nanometres to more than 100 nm. Our experimental results, combined with theoretical modelling, suggest that transport occurs via a thermally activated long-range hopping between multi-tetrad segments of DNA. These results could re-ignite interest in DNA-based wires and devices, and in the use of such systems in the development of programmable circuits.

In Vitro Monomer Swapping in EmrE, a Multidrug Transporter from Escherichia coli, Reveals That the Oligomer Is the Functional Unit

EmrE is a small multidrug transporter, 110 amino acids long that extrudes various drugs in exchange with protons, thereby rendering Escherichia coli cells resistant to these compounds. Negative dominance studies and radiolabeled substrate-binding studies suggested that EmrE functions as an oligomer. Projection structure of two-dimensional crystals of the protein revealed an asymmetric dimer. To identify the functional unit of EmrE, a novel approach was developed. In this method, quantitative monomer swapping is induced in detergent-solubilized EmrE by exposure to 80 °C, a treatment that does not impair transport activity. Oligomer formation is highly specific as judged by several criteria, among them the fact that 35S-EmrE can be “pulled out” from a mixture prepared from generally labeled cells. Using this technique, we show that inactive mutant subunits are functionally complemented when mixed with wild type subunits. The hetero-oligomers thus formed display a decreased affinity to substrates. In addition, sulfhydryl reagents inhibit the above hetero-oligomer even though Cys residues are present only in the inactive monomer. It is concluded that, in EmrE, the oligomer is the functional unit.

In vitro unfolding and refolding of the small multidrug transporter EmrE

The composition of the lipid bilayer is increasingly being recognised as important for the regulation of integral membrane protein folding and function, both in vivo and in vitro. The folding of only a few membrane proteins, however, has been characterised in different lipid environments. We have refolded the small multidrug transporter EmrE in vitro from a denatured state to a functional protein and monitored the influence of lipids on the folding process. EmrE is part of a multidrug resistance protein family that is highly conserved amongst bacteria and is responsible for bacterial resistance to toxic substances. We find that the secondary structure of EmrE is very stable and only small amounts are denatured even in the presence of unusually high denaturant concentrations involving a combination of 10 M urea and 5% SDS. Substrate binding by EmrE is recovered after refolding this denatured protein into dodecylmaltoside detergent micelles or into lipid vesicles. The yield of refolded EmrE decreases with lipid bilayer compositional changes that increase the lateral chain pressure within the bilayer, whilst conversely, the apparent rate of folding seems to increase. These results add further weight to the hypothesis that an increased lateral chain pressure hinders protein insertion across the bilayer. Once the protein is inserted, however, the greater pressure on the transmembrane helices accelerates correct packing and final folding. This work augments the relatively small number of biophysical folding studies in vitro on helical membrane proteins.

Functional Analysis of Novel Multidrug Transporters from Human Pathogens

Proteins of the Smr family are the smallest multidrug transporters, about 110 amino acids long, that extrude various drugs in exchange with protons, thereby rendering bacteria resistant to these compounds. One of these proteins, EmrE, is anEscherichia coli protein, which has been cloned based on its ability to confer resistance to ethidium and methyl viologen and which has been extensively characterized. More than 60 genes coding for Smr proteins have been identified in several bacteria based on amino acid sequence similarity to the emrE gene. In this work we have analyzed the sequence similarity among these homologues and identified some distinct signature sequence elements and several fully conserved residues. Five of these homologues, from human pathogens Mycobacterium tuberculosis, Bordetella pertussis, and Pseudomonas aeruginosaand from Escherichia coli, were cloned into an E. coli expression system. The proteins were further characterized and show varying degrees of methyl viologen uptake into proteoliposomes and [3H]TPP binding in solubilized membranes. The homologues can also form mixed oligomers with EmrE that exhibit intermediate binding characteristics. A comparative study of various homologous proteins provides a tool for deciphering structure-function relationship and monomer-monomer interaction in multidrug transporters and in membrane proteins in general.

Parallel topology of genetically fused EmrE homodimers

EmrE is a small H+‐coupled multidrug transporter in Escherichia coli. Claims have been made for an antiparallel topology of this homodimeric protein. However, our own biochemical studies performed with detergent‐solubilized purified protein support a parallel topology of the protomers. We developed an alternative approach to constrain the relative topology of the protomers within the dimer so that their activity can be assayed also in vivo before biochemical handling. Tandem EmrE was built with two identical monomers genetically fused tail to head (C‐terminus of the first to N‐terminus of the second monomer) with hydrophilic linkers of varying length. All the constructs conferred resistance to ethidium by actively removing it from the cytoplasm. The purified proteins bound substrate and transported methyl viologen into proteoliposomes by a proton‐dependent mechanism. A tandem where one of the essential glutamates was replaced with glutamine transported only monovalent substrates and displayed a modified stoichiometry. The results support a parallel topology of the protomers in the functional dimer. The implications regarding insertion and evolution of membrane proteins are discussed.

The fast release of sticky protons: Kinetics of substrate binding and proton release in a multidrug transporter

EmrE is an Escherichia coli H+-coupled multidrug transporter that provides a unique experimental paradigm because of its small size and stability, and because its activity can be studied in detergent solution. In this work, we report a study of the transient kinetics of substrate binding and substrate-induced proton release in EmrE. For this purpose, we measured transient changes in the tryptophan fluorescence upon substrate binding and the rates of substrate-induced proton release. The fluorescence of the essential and fully conserved Trp residue at position 63 is sensitive to the occupancy of the binding site with either protons or substrate. The maximal rate of binding to detergent-solubilized EmrE of TPP+, a high-affinity substrate, is 2 × 107 M−1·s−1, a rate typical of diffusion-limited reactions. Rate measurements with medium- and low-affinity substrates imply that the affinity is determined mainly by the koff of the substrate. The rates of substrate binding and substrate-induced release of protons are faster at basic pHs and slower at lower pHs. These findings imply that the substrate-binding rates are determined by the generation of the species capable of binding; this is controlled by the high affinity to protons of the glutamate at position 14, because an Asp replacement with a lower pK is faster at the same pHs.

Identification of Tyrosine Residues Critical for the Function of an Ion-coupled Multidrug Transporter

Aromatic residues may play several roles in integral membrane proteins, including direct interaction with substrates. In this work, we studied the contribution of tyrosine residues to the activity of EmrE, a small multidrug transporter from Escherichia coli that extrudes various drugs across the plasma membrane in exchange with protons. Each of five tyrosine residues was replaced by site-directed mutagenesis. Two of these residues, Tyr-40 and Tyr-60, can be partially replaced with hydroxyamino acids, but in the case of Tyr-40, replacement with either Ser or Thr generates a protein with modified substrate specificity. Replacement of Tyr-4 with either Trp or Phe generates a functional transporter. A Cys replacement at this position generates an uncoupled protein; it binds substrate and protons and transports the substrate downhill but is impaired in uphill substrate transport in the presence of a proton gradient. The role of these residues is discussed in the context of the published structures of EmrE.

Tunable Length and Optical Properties of CsPbX3 (X = Cl, Br, I) Nanowires with a Few Unit Cells

Perovskite nanostructures, both hybrid organo-metal and fully inorganic perovskites, have gained a lot of interest in the past few years for their intriguing optical properties in the visible region. We report on inorganic cesium lead bromide (CsPbBr3) nanowires (NWs) having quantum confined dimensions corresponding to 5 unit cells. The addition of various hydrohalic acids (HX, X = Cl, Br, I) was found to highly affect the NW length, composition, and optical properties. Hydrochloric (HCl) and hydroiodic (HI) acids mixed in the reaction solution influence the crystal structure and optical properties and shorten the NWs, while the hydrobromic acid (HBr) addition results solely in shorter NWs, without any structural change. The addition of HX increases the acidity of the reaction solution, resulting in protonation of the oleylamine ligands from oleylamine into oleyl-ammonium cations that behave similarly to Cs+ during crystallization. Therefore, the positions of the Cs+ at the growing surface of the NWs are taken by the oleyl-ammonium cations, thus blocking further growth in the favored direction. The emission of the NWs is tunable between ∼423-505 nm and possesses a potential in the optoelectronic field. Moreover, electrical conductivity measurements of the NWs are discussed to give a new point of view regarding the conductivity of perovskite nanostructures.

Synthesis and Properties of Novel Silver-Containing DNA Molecules

Migration of silver atoms from silver nano-particles selectively to a double-stranded poly(dG)-poly(dC) polymer leads to metallization of the DNA. As a result the DNA molecules become shorter and thicker (higher), as evident from the atomic force microscopy imaging analysis. The metalized molecules can be detected by transmission and scanning electron microscopy in contrast to the initial non-metalized ones.

Quasi 3D imaging of DNA–gold nanoparticle tetrahedral structures

Verification by imaging of the structure of 3D DNA constructs, both bare and conjugated to metal nanoparticles, is challenging. We demonstrate here two transmission electron microscopy (TEM) based methods to distinguish between fully formed tetrahedra, synthesized from DNA conjugated with gold nanoparticles (GNPs) at their vertices, and structures which are only partially formed. When deposited on a surface, fully formed tetrahedra are expected to retain their 3D pyramidal structure, while partially formed structures are expected to form a 2D structure. The first method by which 3D and 2D structures were distinguished was imaging them at different defocusing values. While for 2D structures all the four GNPs acquire Fresnel fringes at the same defocusing value, for 3D structures at least one particle is at a different plane with respect to the others, and so it acquires Fresnel fringes at a different defocusing value. The second method we show is imaging of the structures at different angles. While a single TEM image gives only a 2D projection of the structure, by combining information achieved from imaging at several tilting angles one may verify the structural construct.