Gennady Eidelshtein

Long-range charge transport in single G-quadruplex DNA molecules

DNA and DNA-based polymers are of interest in molecular electronics because of their versatile and programmable structures. However, transport measurements have produced a range of seemingly contradictory results due to differences in the measured molecules and experimental set-ups, and transporting significant current through individual DNA-based molecules remains a considerable challenge. Here, we report reproducible charge transport in guanine-quadruplex (G4) DNA molecules adsorbed on a mica substrate. Currents ranging from tens of picoamperes to more than 100 pA were measured in the G4-DNA over distances ranging from tens of nanometres to more than 100 nm. Our experimental results, combined with theoretical modelling, suggest that transport occurs via a thermally activated long-range hopping between multi-tetrad segments of DNA. These results could re-ignite interest in DNA-based wires and devices, and in the use of such systems in the development of programmable circuits.

Synthesis and Properties of Novel Silver-Containing DNA Molecules

Migration of silver atoms from silver nano-particles selectively to a double-stranded poly(dG)-poly(dC) polymer leads to metallization of the DNA. As a result the DNA molecules become shorter and thicker (higher), as evident from the atomic force microscopy imaging analysis. The metalized molecules can be detected by transmission and scanning electron microscopy in contrast to the initial non-metalized ones.

Synthesis, Characterization, and Selective Delivery of DARPin–Gold Nanoparticle Conjugates to Cancer Cells

We demonstrate that the designed ankyrin repeat protein (DARPin)_9-29, which specifically targets human epidermal growth factor receptor 2 (HER 2), binds tightly to gold nanoparticles (GNPs). Binding of the protein strongly increases the colloidal stability of the particles. The results of experimental analysis and molecular dynamics simulations show that approximately 35 DARPin_9-29 molecules are bound to the surface of a 5 nm GNP and that the binding does not involve the receptor-binding domain of the protein. The confocal fluorescent microscopy studies show that the DARPin-coated GNP conjugate specifically interacts with the surface of human cancer cells overexpressing epidermal growth factor receptor 2 (HER2) and enters the cells by endocytosis. The high stability under physiological conditions and high affinity to the receptors overexpressed by cancer cells make conjugates of plasmonic gold nanostructures with DARPin molecules promising candidates for cancer therapy.

Highly Conductive Thin Uniform Gold‐Coated DNA Nanowires

Over the past decades, DNA, the carrier of genetic information, has been used by researchers as a structural template material. Watson-Crick base pairing enables the formation of complex 2D and 3D structures from DNA through self-assembly. Various methods have been developed to functionalize these structures for numerous utilities. Metallization of DNA has attracted much attention as a means of forming conductive nanostructures. Nevertheless, most of the metallized DNA wires reported so far suffer from irregularity and lack of end-to-end electrical connectivity. An effective technique for formation of thin gold-coated DNA wires that overcomes these drawbacks is developed and presented here. A conductive atomic force microscopy setup, which is suitable for measuring tens to thousands of nanometer long molecules and wires, is used to characterize these DNA-based nanowires. The wires reported here are the narrowest gold-coated DNA wires that display long-range conductivity. The measurements presented show that the conductivity is limited by defects, and that thicker gold coating reduces the number of defects and increases the conductive length. This preparation method enables the formation of molecular wires with dimensions and uniformity that are much more suitable for DNA-based molecular electronics.

Aligned deposition and electrical measurements on single DNA molecules

A reliable method of deposition of aligned individual dsDNA molecules on mica, silicon, and micro/nanofabricated circuits is presented. Complexes of biotinylated double stranded poly(dG)-poly(dC) DNA with avidin were prepared and deposited on mica and silicon surfaces in the absence of Mg(2+) ions. Due to its positive charge, the avidin attached to one end of the DNA anchors the complex to negatively charged substrates. Subsequent drying with a directional gas flow yields DNA molecules perfectly aligned on the surface. In the avidin-DNA complex only the avidin moiety is strongly and irreversibly bound to the surface, while the DNA counterpart interacts with the substrates much more weakly and can be lifted from the surface and realigned in any direction. Using this technique, avidin-DNA complexes were deposited across platinum electrodes on a silicon substrate. Electrical measurements on the deposited DNA molecules revealed linear IV-characteristics and exponential dependence on relative humidity.

Formation of multimeric antibodies for self-delivery of active monomers

Abstract Proteins and peptides have been used as drugs for almost a century. Technological advances in the past 30 years have enabled the production of pure, stable proteins in vast amounts. In contrast, administration of proteins based on their native active conformation (and thus necessitating the use of subcutaneous injections) has remained solely unchanged. The therapeutic anti-HER2 humanized monoclonal immunoglobulin (IgG) Trastuzumab (Herceptin) is a first line of the treatment for breast cancer. Chicken IgY is a commercially important polyclonal antibody (Ab). These Abs were examined for their ability to self-assemble and form ordered aggregates, by several biophysical methods. Atomic force microscopy analyses revealed the formation of multimeric nanostructures. The biological activity of multimeric IgG or IgY particles was retained and restored, in a dilution/time-dependent manner. IgG activity was confirmed by a binding assay using HER2 + human breast cancer cell line, SKBR3, while IgY activity was confirmed by ELISA assay using the VP2 antigen. Competition assay with native Herceptin antibodies demonstrated that the binding availability of the multimer formulation remained unaffected. Under long incubation periods, IgG multimers retained five times more activity than native IgG. In conclusion, the multimeric antibody formulations can serve as a storage depositories and sustained-release particles. These two important characteristics make this formulation promising for future novel administration protocols and altogether bring to light a different conceptual approach for the future use of therapeutic proteins as self-delivery entities rather than conjugated/encapsulated to other bio-compounds.

DNA-Metalization: Synthesis and Properties of Novel Silver-Containing DNA Molecules (Adv. Mater. 24/2016).

D. Porath, A. Kotlyar, and co-workers transform DNA to a conducting material by metalization through coating or chemical modifications, as described on page 4839. Specific and reversible metalization of poly(dG)-poly(dC) DNA by migration of atoms from silver nanoparticles to the DNA is demonstrated. As the transformation occurs gradually, novel, truly hybrid molecular structures are obtained, paving the way to their usage as nanowires in programmable molecular electronic devices and circuits.

Novel Materials for Molecular Electronics - Synthesis and Characterization of Long G4-DNA

The unique properties of G4-based nucleic acids provide the base for a variety of applications.A whole set of biomedical as well as bioanalytical applications is based on the ability of G-quartets to stabilize defined three-dimensional nucleic acid structures that exhibit a high affinity to a target molecule. Such aptamers can therefore show similar binding properties as antibodies with comparable applications in diagnostics and therapy, but exhibit striking advantages like ex-vivo synthesis and increased physicochemical stability. Moreover, they can even show catalytic behavior that can be utilized for bioanalytical purposes. The chapter contains examples for applications in these fields.The structural properties described in previous chapters are the base for applications in molecular nanotechnology and –electronics. Nucleic acids represent the most promising materials in these fields, and here G4 structures show even outstanding mechanical stability and length control from the nano- into the micrometer range. An important step on the way to respective applications is the integration of G4-based nanostructures into technical environments such as microelectrodes. Here electrical field-based approaches – e.g. dielectrophoresis DEP – represent the most promising technique, which has been demonstrated for the integration and subsequent characterization of even single G4 structures. These techniques have also been used to enable the characterization of electrical properties of G4 assemblies as described in this chapter.In conclusion, by presenting various biomedical as well as nanobiotechnological demonstrations this chapter demonstrates the great application potential of G4-based nanostructures.

Advances in Synthesis and Measurement of Charge Transport in DNA‐Based Derivatives

Charge transport through molecular structures is interesting both scientifically and technologically. To date, DNA is the only type of polymer that transports significant currents over distances of more than a few nanometers in individual molecules. For molecular electronics, DNA derivatives are by far more promising than native DNA due to their improved charge-transport properties. Here, the synthesis of several unique DNA derivatives along with electrical characterization and theoretical models is surveyed. The derivatives include double stranded poly(G)-poly(C) DNA molecules, four stranded G4-DNA, metal-DNA hybrid molecular wires, and other DNA molecules that are modified either at the bases or at the backbone. The electrical characteristics of these nanostructures, studied experimentally by electrostatic force microscopy, conductive atomic force microscopy, and scanning tunneling microscopy and spectroscopy, are reviewed.

Preparation, Characterization and Manipulation of Conjugates between Gold Nanoparticles and DNA

Here we described the preparation and characterization by atomic force microscopy of dumbbell-shaped conjugates between 450 bp double-stranded DNA polymer, poly(dG)-poly(dC), and 5 nm gold nanoparticles (GNPs). We have demonstrated that the size of the nanoparticles in the conjugates can be increased in a controlled fashion. Application of the conjugates for measuring the electrical conductivity of DNA is discussed.