E. Artal

The Quijote CMB Experiment

We present the current status of the QUIJOTE (Q-U-I JOint TEnerife) CMB Experiment, a new instrument which will start operations early in 2009 at Teide Observatory with the aim of characterizing the polarization of the CMB and other processes of galactic and extragalactic emission in the frequency range 10–30GHz and at large angular scales. QUIJOTE will be a valuable complement at low frequencies for the PLANCK mission, and will have the required sensitivity to detect a primordial gravitational-wave component if the tensor-to-scalar ratio is larger than r = 0.05.

Very low-noise differential radiometer at 30 GHz for the PLANCK LFI

The PLANCK mission of the European Space Agency is devoted to produce sky maps of the cosmic microwave background radiation. The low-frequency instrument is a wide-band cryogenic microwave radiometer array operating at 30, 44, and 70 GHz. The design, test techniques, and performance of the complete differential radiometer at 30 GHz are presented. This elegant breadboard 30-GHz radiometer is composed of a front-end module (FEM) assembled at the Jodrell Bank Observatory, Cheshire, U.K., and a back-end module assembled at the Universidad de Cantabria, Cantabria, Spain, and Telecomunicacio/spl acute/, Universitat Polite/spl acute/cnica de Catalunya, Barcelona, Spain. The system noise temperature was excellent, mainly due to the very low noise performance of the FEM amplifiers, which achieved an average noise temperature of 9.4 K.

The QUIJOTE-CMB experiment: studying the polarisation of the galactic and cosmological microwave emissions

The QUIJOTE (Q-U-I JOint Tenerife) CMB Experiment will operate at the Teide Observatory with the aim of characterizing the polarisation of the CMB and other processes of Galactic and extragalactic emission in the frequency range of 10-40GHz and at large and medium angular scales. The first of the two QUIJOTE telescopes and the first multi-frequency (10-30GHz) instrument are already built and have been tested in the laboratory. QUIJOTE-CMB will be a valuable complement at low frequencies for the Planck mission, and will have the required sensitivity to detect a primordial gravitational-wave component if the tensor-to-scalar ratio is larger than r = 0.05.

QUIJOTE Scientific Results. II. Polarisation Measurements of the Microwave Emission in the Galactic molecular complexes W43 and W47 and supernova remnant W44

This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) under the projects AYA2007-68058-C03-01, AYA2010-21766- nC03-02, AYA2012-39475-C02-01, the Consolider-Ingenio project CSD2010-00064 (EPI: Exploring the Physics of Inflation) and also by the European Union’s Horizon 2020 research and innovation programme under grant agreement number 687312. FP thanks the European Commission under the Marie Sklodowska-Curie Actions within the H2020 program, Grant Agreement Number 658499-PolAME-H2020-MSCA-IF-2014.

Planck-LFI 44 GHz back end module

This work describes the principle of operation, assembly and performance of one branch of the 44 GHz back end module (BEM) for the Planck low frequency instrument (LFI). This subsystem constitutes a fully representative branch of the qualification-model version (QM). It includes waveguide to microstrip transition, GaAs pseudomorphic high electron mobility transistor (PHEMT) low noise amplifiers (LNA), bandpass filter, square-law detector and dc amplifier. The fundamentals of the design of the RF part are described and all of the components have been tested individually before integration. Using single tone and wideband noise stimuli, the output voltage has been measured for several input powers, in order to obtain the sensitivity factor of the complete BEM. The effective bandwidth and the equivalent noise temperature have been calculated from the measurements, taking into account the frequency dependence on the noise source and the BEM. Finally, the low frequency output power spectrum has been obtained and a maximum 1/f knee frequency around 200 Hz has been measured with a 3 dB output signal video bandwidth above 50 KHz.

Broadband Back-End Module for Radio-Astronomy Applications in the Ka-Band

This paper presents the design, simulation and measurement of a broadband back-end module (BEM) for radio-astronomy applications in the Ka-band. It is a direct conversion receiver based on low noise amplification, band pass filtering and Schottky diode detection. System simulations are based on individual linear-subsystems S-parameters measurements together with non-linear detector model. Measurements show more than 30 dB of RF gain over the 26 to 36 GHz band with a noise figure below 3.9 dB. Detected voltage is in the range 1-10 mV which meets the application specifications.

The QUIJOTE TGI

The QUIJOTE TGI instrument is currently being assembled and tested at the IAC in Spain. The TGI is a 31 pixel 26-36 GHz polarimeter array designed to be mounted at the focus of the second QUIJOTE telescope. This follows a first telescope and multi-frequency instrument that have now been observing almost 2 years. The polarimeter design is based on the QUIET polarimeter scheme but with the addition of an extra 90º phase switch which allows for quasiinstantaneous complete QUI measurements through each detector. The advantage of this solution is a reduction in the systematics associated with differencing two independent radiometer channels. The polarimeters are split into a cold front end and a warm back end. The back end is a highly integrated design by the engineers at DICOM. It is also sufficiently modular for testing purposes. In this presentation the high quality wide band components used in the optical design (also designed in DICOM) are presented as well as the novel cryogenic modular design. Each polarimeter chain is accessible individually and can be removed from the cryostat and replaced without having to move the remaining pixels. The optical components work over the complete Ka band showing excellent performance. Results from the sub unit measurements are presented and also a description of the novel calibration technique that allows for bandpass measurement and polar alignment. Terrestrial Calibration for this instrument is very important and will be carried out at three points in the commissioning phase: in the laboratory, at the telescope site and finally a reduced set of calibrations will be carried out on the telescope before measurements of extraterrestrial sources begin. The telescope pointing model is known to be more precise than the expected calibration precision so no further significant error will be added through the telescope optics. The integrated back-end components are presented showing the overall arrangement for mounting on the cryostat. Many of the microwave circuits are in-house designs with performances that go beyond commercially available products.

S-Parameters Measurement of Chip GaAs FETs up TO 22 GHz using the TRL Calibration Technique

In this paper, the design of a Microstrip Test Fixture for TRL calibration is described. Experimental results for S-parameters measurement of a GaAs FET chip in the 3-22 GHz frequency range are presented. Repeatability of connections and measurements is discussed and experimental results are also presented.

EM developments for a radio astronomy polarimeter: The QUIJOTE experiment

A comparison between simulated and measured results in different subsystems of a radio astronomy polarimeter receiver at 26-36 GHz band is presented. This comparison underlines the importance of careful simulation with different electromagnetic software tools in order to predict the receiver behavior. The receiver obtains three (Q, U and I) Stokes parameters simultaneously.

The status of the QUIJOTE multi-frequency instrument

The QUIJOTE-CMB project has been described in previous publications. Here we present the current status of the QUIJOTE multi-frequency instrument (MFI) with five separate polarimeters (providing 5 independent sky pixels): two which operate at 10-14 GHz, two which operate at 16-20 GHz, and a central polarimeter at 30 GHz. The optical arrangement includes 5 conical corrugated feedhorns staring into a dual reflector crossed-draconian system, which provides optimal cross-polarization properties (designed to be < −35 dB) and symmetric beams. Each horn feeds a novel cryogenic on-axis rotating polar modulator which can rotate at a speed of up to 1 Hz. The science driver for this first instrument is the characterization of the galactic emission. The polarimeters use the polar modulator to derive linear polar parameters Q, U and I and switch out various systematics. The detection system provides optimum sensitivity through 2 correlated and 2 total power channels. The system is calibrated using bright polarized celestial sources and through a secondary calibration source and antenna. The acquisition system, telescope control and housekeeping are all linked through a real-time gigabit Ethernet network. All communication, power and helium gas are passed through a central rotary joint. The time stamp is synchronized to a GPS time signal. The acquisition software is based on PLCs written in Beckhoffs TwinCat and ethercat. The user interface is written in LABVIEW. The status of the QUIJOTE MFI will be presented including pre-commissioning results and laboratory testing.