E Hu

High-throughput cryopreservation of spermatozoa of blue catfish (Ictalurus furcatus): Establishment of an approach for commercial-scale processing

Hybrid catfish created by crossing of female channel catfish (Ictalurus punctatus) and male blue catfish (Ictalurus furcatus) are being used increasingly in foodfish aquaculture because of their fast growth and efficient food conversion. However, the availability of blue catfish males is limited, and their peak spawning is at a different time than that of the channel catfish. As such, cryopreservation of sperm of blue catfish could improve production of hybrid catfish, and has been studied in the laboratory and tested for feasibility in a commercial dairy bull cryopreservation facility. However, an approach for commercially relevant production of cryopreserved blue catfish sperm is still needed. The goal of this study was to develop practical approaches for commercial-scale sperm cryopreservation of blue catfish by use of an automated high-throughput system (MAPI, CryoBioSystem Co.). The objectives were to: (1) refine cooling rate and cryoprotectant concentration, and evaluate their interactions; (2) evaluate the effect of sperm concentration on cryopreservation; (3) refine cryoprotectant concentration based on the highest effective sperm concentration; (4) compare the effect of thawing samples at 20 or 40°C; (5) evaluate the fertility of thawed sperm at a research scale by fertilizing with channel catfish eggs; (6) test the post-thaw motility and fertility of sperm from individual males in a commercial setting, and (7) test for correlation of cryopreservation results with biological indices used for male evaluation. The optimal cooling rate was 5°C/min (Micro Digitcool, IMV) for high-throughput cryopreservation using CBS high-biosecurity 0.5-ml straws with 10% methanol, and a concentration of 1×10(9)sperm/ml. There was no difference in post-thaw motility when samples were thawed at 20°C for 40s or 40°C for 20s. After fertilization, the percentage of neurulation (Stage V embryos) was 80±21%, and percentage of embryonic mobility (Stage VI embryo) was 51±22%. There was a significant difference among the neurulation values produced by thawed blue catfish sperm, fresh blue catfish sperm (P=0.010) and channel catfish sperm (P=0.023), but not for Stage VI embryos (P≥0.585). Cryopreserved sperm from ten males did not show significant variation in post-thaw motility or fertility at the neurulation stage. This study demonstrates that the protocol established for high-throughput cryopreservation of blue catfish sperm can provide commercially relevant quantities and quality of sperm with stable fertility for hybrid catfish production and provides a model for establishment of commercial-scale approaches for other aquatic species.

Outlook for development of high-throughput cryopreservation for small-bodied biomedical model fishes☆☆☆

With the development of genomic research technologies, comparative genome studies among vertebrate species are becoming commonplace for human biomedical research. Fish offer unlimited versatility for biomedical research. Extensive studies are done using these fish models, yielding tens of thousands of specific strains and lines, and the number is increasing every day. Thus, high-throughput sperm cryopreservation is urgently needed to preserve these genetic resources. Although high-throughput processing has been widely applied for sperm cryopreservation in livestock for decades, application in biomedical model fishes is still in the concept-development stage because of the limited sample volumes and the biological characteristics of fish sperm. High-throughput processing in livestock was developed based on advances made in the laboratory and was scaled up for increased processing speed, capability for mass production, and uniformity and quality assurance. Cryopreserved germplasm combined with high-throughput processing constitutes an independent industry encompassing animal breeding, preservation of genetic diversity, and medical research. Currently, there is no specifically engineered system available for high-throughput of cryopreserved germplasm for aquatic species. This review is to discuss the concepts and needs for high-throughput technology for model fishes, propose approaches for technical development, and overview future directions of this approach.

Cryopreservation in fish: current status and pathways to quality assurance and quality control in repository development

Cryopreservation in aquatic species in general has been constrained to research activities for more than 60 years. Although the need for application and commercialisation pathways has become clear, the lack of comprehensive quality assurance and quality control programs has impeded the progress of the field, delaying the establishment of germplasm repositories and commercial-scale applications. In this review we focus on the opportunities for standardisation in the practices involved in the four main stages of the cryopreservation process: (1) source, housing and conditioning of fish; (2) sample collection and preparation; (3) freezing and cryogenic storage of samples; and (4) egg collection and use of thawed sperm samples. In addition, we introduce some key factors that would assist the transition to commercial-scale, high-throughput application.

A quality assurance initiative for commercial-scale production in high-throughput cryopreservation of blue catfish sperm☆

Cryopreservation of fish sperm has been studied for decades at a laboratory (research) scale. However, high-throughput cryopreservation of fish sperm has recently been developed to enable industrial-scale production. This study treated blue catfish (Ictalurus furcatus) sperm high-throughput cryopreservation as a manufacturing production line and initiated quality assurance plan development. The main objectives were to identify: (1) the main production quality characteristics; (2) the process features for quality assurance; (3) the internal quality characteristics and their specification designs; (4) the quality control and process capability evaluation methods, and (5) the directions for further improvements and applications. The essential product quality characteristics were identified as fertility-related characteristics. Specification design which established the tolerance levels according to demand and process constraints was performed based on these quality characteristics. Meanwhile, to ensure integrity throughout the process, internal quality characteristics (characteristics at each quality control point within process) that could affect fertility-related quality characteristics were defined with specifications. Due to the process feature of 100% inspection (quality inspection of every fish), a specific calculation method, use of cumulative sum (CUSUM) control charts, was applied to monitor each quality characteristic. An index of overall process evaluation, process capacity, was analyzed based on in-control process and the designed specifications, which further integrates the quality assurance plan. With the established quality assurance plan, the process could operate stably and quality of products would be reliable.

3-D printing provides a novel approach for standardization and reproducibility of freezing devices

Cryopreservation has become an important and accepted tool for long-term germplasm conservation of animals and plants. To protect genetic resources, repositories have been developed with national and international cooperation. For a repository to be effective, the genetic material submitted must be of good quality and comparable to other submissions. However, due to a variety of reasons, including constraints in knowledge and available resources, cryopreservation methods for aquatic species vary widely across user groups which reduces reproducibility and weakens quality control. Herein we describe a standardizable freezing device produced using 3-dimensional (3-D) printing and introduce the concept of network sharing to achieve aggregate high-throughput cryopreservation for aquatic species. The objectives were to: 1) adapt widely available polystyrene foam products that would be inexpensive, portable, and provide adequate work space; 2) develop a design suitable for 3-D printing that could provide multiple configurations, be inexpensive, and easy to use, and 3) evaluate various configurations to attain freezing rates suitable for various common cryopreservation containers. Through this approach, identical components can be accessed globally, and we demonstrated that 3-D printers can be used to fabricate parts for standardizable freezing devices yielding relevant and reproducible cooling rates across users. With standardized devices for freezing, methods and samples can harmonize into an aggregated high-throughput pathway not currently available for aquatic species repository development.

A Strategy for Sperm Cryopreservation of Atlantic Salmon, Salmo salar, for Remote Commercial-scale High-throughput Processing

Sperm cryopreservation is an essential tool for long-term storage of genetic resources for aquaculture fishes. The goal of this study was to develop an efficient and streamlined protocol for high-throughput processing for sperm cryopreservation in Atlantic salmon, Salmo salar. The objectives were to evaluate: 1) osmolality of blood serum for determining extender osmolality; 2) effects of extenders for fresh sperm dilution and refrigerated storage; 3) effects of methanol and dimethyl sulfoxide (DMSO) on fresh sperm motility, and 4) motility and fertility after thawing. In this study, sperm samples were collected at a hatchery site in Canada, and shipped to a freezing site located 2200 miles (3550 km) away in the United States. Evaluation of three extenders indicated that Mounib solution was suitable for diluting dry sperm for sample processing. Ten percent of methanol or DMSO was less toxic to sperm cells than was 15% within 30 min. Further testing with methanol at 5, 10, and 15%, and sperm solution:extender dilutions (v:v) of 1:1, 1:3, 1:19 (at concentrations of ~5×107; 3×108, and 1×109 cells/mL) indicated that methanol at 5% and 10% showed less toxicity to fresh sperm within 1 hr at sperm: extender dilutions of 1:1 and 1:3. Post-thaw motility of sperm cryopreserved with 10% methanol was significantly higher than that with 10% DMSO, and fertility reflected those results (0-1% in DMSO vs. 38-55% in methanol). Further evaluation of sperm cryopreservation with 10 and 15% methanol at sperm dilution ratios of 1:1, 1:3, 1:19 indicated post-thaw motility in 10% methanol was significantly higher than that in 15% methanol, and post-thaw fertility in 10% methanol at 1:1 and 1:3 dilution ratios had fertilization rates similar to that of fresh sperm controls. Sperm samples from 12 males cryopreserved with 10% methanol showed male-to-male variation in post-thaw motility (0-36%). Overall, a simplified standard protocol was established for cryopreservation of shipped sperm of Atlantic salmon using extender without egg yolk and yielded satisfactory post-thaw motility and fertilization rates. This procedure can be readily adopted by aquaculture facilities to take advantage of high-throughput cryopreservation capabilities at remote service centers. Most importantly, this approach lays the groundwork for an alternative commercial model for commercial-scale production, quality control and development of industrial standards. Control of male variability and sperm quality remain important considerations for future work.

Vitrification as an Alternative Approach for Sperm Cryopreservation in Marine Fishes

The Southern Flounder Paralichthys lethostigma is a high-value species and a promising aquaculture candidate. Because sperm volume can be limited in this species (<500 μL), new sperm cryopreservation methods need to be evaluated. Vitrification is an alternative to conventional slow-rate freezing, whereby small volumes are cryopreserved at high cooling rates (>1,000°C/min). The goal of this work was to develop a standardized approach for vitrification of Southern Flounder sperm. The specific objectives were to (1) evaluate thawing methods and vitrification solutions, (2) evaluate the postthaw membrane integrity of sperm vitrified in different cryoprotectant solutions, (3) examine the relationship between membrane integrity and motility, and (4) evaluate the ability of vitrified sperm to fertilize eggs. From the vitrification solutions tested, the highest postthaw motility (28 ± 9% [mean ± SD]) and membrane integrity (11 ± 4%) was observed for 20% ethylene glycol plus 20% glycerol. There was no significant difference in postthaw motility of sperm thawed at 21°C or at 37°C. Fertilization from vitrified sperm in one trial yielded the same fertilization rate (50 ± 20%) as the fresh sperm control, while the sperm from the other two males yielded 3%. This is the first report of fertilization by vitrified sperm in a marine fish. Vitrification can be simple, fast, inexpensive, performed in the field, and, at least for small fishes, offers an alternative to conventional cryopreservation. Because of the minute volumes needed for ultrarapid cooling, vitrification is not presently suited as a production method for large fishes. Vitrification can be used to reconstitute lines from valuable culture species and biomedical models, conserve mutants for development of novel lines for ornamental aquaculture, and transport frozen sperm from the field to the repository to expand genetic resources.