Edilson Valmir Benvenutti

Application of Brazilian pine-fruit shell as a biosorbent to removal of reactive red 194 textile dye from aqueous solution kinetics and equilibrium study.

The Brazilian pine-fruit shell (Araucaria angustifolia) is a food residue, that was used as biosorbent for the removal of non-hydrolyzed reactive red 194 (NRR) and hydrolyzed reactive red 194 (HRR) forms from aqueous solutions. Chemical treatment of Brazilian pine-fruit shell (PW), with chromium (Cr-PW), with acid (A-PW), and with acid followed by chromium (Cr-A-PW) were also tested as alternative biosorbents for the removal of NRR and HRR from aqueous effluents. It was observed that the treatment of the Brazilian pine-fruit shell with chromium (Cr-PW and Cr-A-PW) leaded to a remarkable increase in the specific surface area and average porous volume of these biosorbents when compared to unmodified Brazilian pine-fruit shell (PW). The effects of shaking time, biosorbent dosage and pH on biosorption capacity were studied. In acidic pH region (pH 2.0) the biosorption of NRR and HRR were favorable. The contact time required to obtain the equilibrium was 24h at 25 degrees C. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. For NRR reactive dye the equilibrium data were best fitted to the Sips isotherm model using PW and A-PW as biosorbents, and Redlich-Peterson isotherm model using Cr-PW and Cr-A-PW as biosorbents. For HRR reactive dye the equilibrium data were best fitted to the Sips isotherm model using PW, A-PW and Cr-A-PW and the Redlich-Peterson isotherm model for Cr-PW as biosorbent.

Infrared and thermogravimetric study of high pressure consolidation in alkoxide silica gel powders

High density, transparent, crack-free and hard compacts of silica gel were produced by compaction under nearly hydrostatic environment at 4.5 GPa, at room temperature. The starting material was used three days after synthesis by hydrolysis of alkoxides without additional treatment. Fourier transform infrared spectroscopy (FTIR), using the KBr technique and a high vacuum cell at temperatures up to 450°C, and thermogravimetric analysis (TGA) up to 900°C was conducted. A reduction up to 60% in the adsorbed water content of the compacted silica gel was observed. Changes in the 3000 to 3800 cm−1 region indicate that the surface silanol groups became bridged, which promotes condensation reactions of dehydroxylation. Those results suggest that the mechanism for consolidation under high-pressure, is ‘cold sintering’ process, where silanol groups at the surface of the nanoparticles condense to form siloxane bonds between the particles and water, resulting in a stiff body with closed nanopores containing trapped water.

Dry washing in biodiesel purification: a comparative study of adsorbents

The purpose of this work is to compare the efficiency of different adsorbents in the purification of biodiesel produced by alkaline transesterification of soybean oil (Methanol/KOH). The proposed methodologies were based on the use of Magnesol®, silica, Amberlite BD10 DRY® and Purolite PD 206® as adsorbents and were developed by adsorption at 65 oC. The response of each adsorbent was measured through the residual potassium, alcohol, water and soaps dissolved in the purified biodiesel. As a result, we observe that Magnesol® and silica showed better adsorption properties than Amberlite BD10 DRY® and Purolite PD 206®, especially for removing soap, free and bonded glycerol and potassium. In comparison to the conventional acid water washing, these matrices were found to be equally appropriate for the removal of inorganic and organic contaminant species from biodiesel. The main results found for these two adsorbents (Magnesol® 1% and silica 2%) were values below 0.17 mg KOH g-1 for acid number, 1 mg kg-1 of K, 61 ppm of soap, 500 mg kg-1 of water, 0.22% of methanol and 0.03% of free glycerol

Effect of the support size on the properties of β-galactosidase immobilized on chitosan: advantages and disadvantages of macro and nanoparticles.

The effect of the support size on the properties of enzyme immobilization was investigated by using chitosan macroparticles and nanoparticles. They were prepared by precipitation and ionotropic gelation, respectively, and were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), transmission electron microscopy (TEM), light scattering analysis (LSA), and N(2) adsorption-desorption isotherms. β-Galactosidase was used as a model enzyme. It was found that the different sizes and porosities of the particles modify the enzymatic load, activity, and thermal stability of the immobilized biocatalysts. The highest activity was shown by the enzyme immobilized on nanoparticles when 204.2 mg protein·(g dry support)(-1) were attached. On the other hand, the same biocatalysts presented lower thermal stability than macroparticles. β-Galactosidase immobilized on chitosan macro and nanoparticles exhibited excellent operational stability at 37 °C, because it was still able to hydrolyze 83.2 and 75.93% of lactose, respectively, after 50 cycles of reuse.

FTIR Thermal Analysis on Organofunctionalized Silica Gel

Silica gel modificada com grupos orgânicos tem sido muito utilizada como fase estacionaria para cromatografia liquida. Reacoes de enxerto podem ser usadas na obtencao de superficies modificadas estaveis de silica gel. Neste trabalho a silica gel (10 nm de diâmetro de poro e 320 m 2 g -1 de area superficial) foi modificada quimicamente com 3-cloropropiltrimetoxisilano ou com 3-aminopropiltrimetoxisilano e posteriormente com anilina, p-anisidina, benzilamina e 3-fenilpropilcloreto a fim de se obter grupos aromaticos imobilizados na superficie de silica gel. A espectroscopia no infravermelho foi utilizada para a caracterizacao dos grupos aromaticos enxertados, usando-se uma cela de quartzo. Os solidos foram aquecidos a varias temperaturas em alto vacuo sendo que as areas sob as bandas dos grupos orgânicos obtidas no infravermelho foram usadas para estimar a estabilidade termica. Silica gel modified with organic groups is widely used as a stationary phase for liquid chromatography. Grafting synthesis can be used to obtain stable modified silica gel surfaces. In this work, silica gel (10 nm of pore diameter and surface area of 320 m 2 g -1 ) was chemically modified with 3-chloropropyltrimethoxysilane or 3-aminopropyltrimethoxysilane and reacted with aniline, p-anisidine, benzylamine and 3-phenylpropylchloride in order to yield aromatic groups immobilized on the silica gel surface. Infrared spectroscopy was utilized for characterization of the aromatic groups grafted on the silica gel surface, using a quartz cell. The solids were heated at several temperatures in high vacuum and the infrared band areas of the organic groups were used to evaluate the thermal stability.

4-Phenylenediaminepropylsilica xerogel as a sorbent for copper determination in waters by slurry-sampling ETAAS

The synthesis of a new, hybrid mesoporous sorbent, 4-phenylenediaminepropylsilica (4-PhAP/silica xerogel) obtained by the sol–gel process is described. This material was characterized by infrared spectroscopy (IR), elemental analysis (CHN), and nitrogen adsorption–desorption isotherms. Subsequently, this material was employed for the successful pre-concentration of copper in natural water reference materials. The copper characteristic mass was 15.0 ± 0.2 pg. The detection limit for copper determination in natural waters employing the pre-concentration procedure was 0.2 µg l−1. The average tube lifetime was 750 analytical firings when 20 µl of 1.5% m/v copper sorbed on 4-PhAP/silica xerogel slurry was delivered to a previously treated W–Rh treated platform of a transversely heated graphite atomizer (TGA). The pre-concentration factor obtained with 4-PhAP/silica xerogel as adsorbent for copper determination was 3.75 and the retention capacity of the sorbent was 0.52 mmol copper per gram of sorbent.

Sol-gel thin-film based mesoporous silica and carbon nanotubes for the determination of dopamine, uric acid and paracetamol in urine

This work describes the preparation, characterization and application of a hybrid material composed of disordered mesoporous silica (SiO2) modified with multiwalled carbon nanotubes (MWCNTs), obtained by the sol-gel process using HF as the catalyst. This hybrid material was characterized by N2 adsorption-desorption isotherms, X-ray powder diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission microscopy (HR-TEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). This new hybrid material was used for the construction of a thin film on a glassy carbon electrode. The modified electrode using this material was designated SiO2/MWCNT/GCE. The electrocatalytic properties of the electrode toward dopamine, uric acid and paracetamol oxidation were studied by differential pulse voltammetry. Well-defined and separated oxidation peaks were observed in phosphate buffer solution at pH 7.0, in contrast with the ill-defined peaks observed with unmodified glassy carbon electrodes. The electrode had high sensitivity for the determination of dopamine, uric acid and paracetamol, with the limits of detection obtained using statistical methods, at 0.014, 0.068 and 0.098 µmol L(-1), respectively. The electrode presented some important advantages, including enhanced physical rigidity, surface renewability by polishing and high sensitivity, allowing the simultaneous determination of these three analytes in a human urine sample.

Ionic silica based hybrid material containing the pyridinium group used as an adsorbent for textile dye.

The present study reports the development of an ionic silica based hybrid material containing the cationic pyridinium group, which was employed for the removal of the Reactive Red 194 textile dye from aqueous solution. Three hybrid material samples were prepared with planned textural and chemical properties, varying the inorganic precursor molar percentage in the sol-gel synthesis. The obtained samples were defined as Py/Si-90, Py/Si-92 and Py/Si-94, where the number specifies the inorganic molar percentage. The hybrid samples were characterized by elemental, infrared, (13)C and (29)Si NMR, N(2) adsorption-desorption isotherms and thermogravimetric analyses. The dye-removing ability of these adsorbents was determined by the batch contact adsorption procedure. Effects such as pH value and adsorbent dosage on the adsorption capacities were studied. Four kinetic models were applied. The adsorption was best fitted to Avrami fractional-order kinetic model for the three hybrid material samples. The kinetic data were also adjusted to an intra-particle diffusion model resulting three linear regions, indicating that the adsorption kinetics follows multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich and Liu isotherm models. The maximum adsorption capacities were 165.4, 190.3 and 195.9 mg g(-1) for Py/Si-90, Py/Si-92 and Py/Si-94, respectively. Simulated dye-house effluents were used to check the applicability of the proposed adsorbents for effluent treatment. Dye loaded adsorbents were regenerated (>98.2%) by using 0.4 mol L(-1) of NaOH solution as an eluent.

Development of active biofilms of quinoa (Chenopodium quinoa W.) starch containing gold nanoparticles and evaluation of antimicrobial activity.

Active biofilms of quinoa (Chenopodium quinoa, W.) starch were prepared by incorporating gold nanoparticles stabilised by an ionic silsesquioxane that contains the 1,4-diazoniabicyclo[2.2.2]octane chloride group. The biofilms were characterised and their antimicrobial activity was evaluated against Escherichiacoli and Staphylococcusaureus. The presence of gold nanoparticles produces an improvement in the mechanical, optical and morphological properties, maintaining the thermal and barrier properties unchanged when compared to the standard biofilm. The active biofilms exhibited strong antibacterial activity against food-borne pathogens with inhibition percentages of 99% against E. coli and 98% against S. aureus. These quinoa starch biofilms containing gold nanoparticles are very promising to be used as active food packaging for the maintenance of food safety and extension of the shelf life of packaged foods.

Materiais híbridos à base de sílica obtidos pelo método sol-gel

This review deals with silica based hybrid materials obtained by the sol-gel method. It involves concepts, classifications and important definitions regarding the sol-gel method that allows obtaining materials with organic and inorganic components dispersed in a molecular or nanometric level. We discuss the properties and characteristics of hybrid materials related to experimental synthesis conditions. We devote a special attention to the nanostructured materials, where the self-organization is imposed by the organic component. Finally, we present some important applications of these materials based on their specific properties.