Ekaterina Makshina

Lactic acid as a platform chemical in the biobased economy: the role of chemocatalysis

Upcoming bio-refineries will be at the heart of the manufacture of future transportation fuels, chemicals and materials. A narrow number of platform molecules are envisioned to bridge natures abundant polysaccharide feedstock to the production of added-value chemicals and intermediate building blocks. Such platform molecules are well-chosen to lie at the base of a large product assortment, while their formation should be straightforward from the refined biomass, practical and energy efficient, without unnecessary loss of carbon atoms. Lactic acid has been identified as one such high potential platform. Despite its established fermentation route, sustainability issues – like gypsum waste and cost factors due to multi-step purification and separation requirements – will arise as soon as the necessary orders of magnitude larger volumes are needed. Innovative production routes to lactic acid and its esters are therefore under development, converting sugars and glycerol in the presence of chemocatalysts. Moreover, catalysis is one of the fundamental routes to convert lactic acid into a range of useful chemicals in a platform approach. This contribution attempts a critical overview of all advances in the field of homogeneous and heterogeneous catalysis and recognises a great potential of some of these chemocatalytic approaches to produce and transform lactic acid as well as some other promising α-hydroxy acids.

Fast and Selective Sugar Conversion to Alkyl Lactate and Lactic Acid with Bifunctional Carbon–Silica Catalysts

A novel catalyst design for the conversion of mono- and disaccharides to lactic acid and its alkyl esters was developed. The design uses a mesoporous silica, here represented by MCM-41, which is filled with a polyaromatic to graphite-like carbon network. The particular structure of the carbon-silica composite allows the accommodation of a broad variety of catalytically active functions, useful to attain cascade reactions, in a readily tunable pore texture. The significance of a joint action of Lewis and weak Brønsted acid sites was studied here to realize fast and selective sugar conversion. Lewis acidity is provided by grafting the silica component with Sn(IV), while weak Brønsted acidity originates from oxygen-containing functional groups in the carbon part. The weak Brønsted acid content was varied by changing the amount of carbon loading, the pyrolysis temperature, and the post-treatment procedure. As both catalytic functions can be tuned independently, their individual role and optimal balance can be searched for. It was thus demonstrated for the first time that the presence of weak Brønsted acid sites is crucial in accelerating the rate-determining (dehydration) reaction, that is, the first step in the reaction network from triose to lactate. Composite catalysts with well-balanced Lewis/Brønsted acidity are able to convert the trioses, glyceraldehyde and dihydroxyacetone, quantitatively into ethyl lactate in ethanol with an order of magnitude higher reaction rate when compared to the Sn grafted MCM-41 reference catalyst. Interestingly, the ability to tailor the pore architecture further allows the synthesis of a variety of amphiphilic alkyl lactates from trioses and long chain alcohols in moderate to high yields. Finally, direct lactate formation from hexoses, glucose and fructose, and disaccharides composed thereof, sucrose, was also attempted. For instance, conversion of sucrose with the bifunctional composite catalyst yields 45% methyl lactate in methanol at slightly elevated reaction temperature. The hybrid catalyst proved to be recyclable in various successive runs when used in alcohol solvent.

Ternary Ag/MgO-SiO2 catalysts for the conversion of ethanol into butadiene.

Ternary Ag/Magnesia-silica catalysts were tested in the direct synthesis of 1,3-butadiene from ethanol. The influence of the silver content and the type of silica source on catalytic performance has been studied. Prepared catalysts were characterized by (29) Si NMR, N2 sorption, small-angle X-ray scattering measurements, XRD, environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM/EDX), FTIR spectroscopy of adsorbed pyridine and CO2 , temperature-programmed desorption of CO2 and UV/Vis diffuse reflectance spectroscopy. Based on these characterization results, the catalytic performance of the catalysts in the 1,3-butadiene formation process was interpreted and a tentative model explaining the role of the different catalytically active sites was elaborated. The balance of the active sites is crucial to obtain an active and selective catalyst to form 1,3-butadiene from ethanol. The optimal silver loading is 1-2 wt% on a MgO-silica support with a molar Mg/Si ratio of 2. The silver species and basic sites (Mg−O pairs and basic OH groups) are of prime importance in the 1,3-butadiene production, catalyzing mainly the ethanol dehydrogenation and the aldol condensation, respectively.

Catalytic gas-phase production of lactide from renewable alkyl lactates

A new route to lactide, which is a key building block of the bioplastic polylactic acid, is proposed involving a continuous catalytic gas-phase transesterification of renewable alkyl lactates in a scalable fixed-bed setup. Supported TiO2 /SiO2 catalysts are highly selective to lactide, with only minimal lactide racemization. The solvent-free process allows for easy product separation and recycling of unconverted alkyl lactates and recyclable lactyl intermediates. The catalytic activity of TiO2 /SiO2 catalysts was strongly correlated to their optical properties by DR UV/Vis spectroscopy. Catalysts with high band-gap energy of the supported TiO2 phase, indicative of a high surface spreading of isolated Ti centers, show the highest turnover frequency per Ti site.