Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Stef Kerkhofs is active.

Publication


Featured researches published by Stef Kerkhofs.


Chemsuschem | 2015

Ternary Ag/MgO-SiO2 catalysts for the conversion of ethanol into butadiene.

Wout Janssens; Ekaterina Makshina; Pieter Vanelderen; Filip de Clippel; Kristof Houthoofd; Stef Kerkhofs; Johan A. Martens; Pierre A. Jacobs; Bert F. Sels

Ternary Ag/Magnesia-silica catalysts were tested in the direct synthesis of 1,3-butadiene from ethanol. The influence of the silver content and the type of silica source on catalytic performance has been studied. Prepared catalysts were characterized by (29) Si NMR, N2 sorption, small-angle X-ray scattering measurements, XRD, environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM/EDX), FTIR spectroscopy of adsorbed pyridine and CO2 , temperature-programmed desorption of CO2 and UV/Vis diffuse reflectance spectroscopy. Based on these characterization results, the catalytic performance of the catalysts in the 1,3-butadiene formation process was interpreted and a tentative model explaining the role of the different catalytically active sites was elaborated. The balance of the active sites is crucial to obtain an active and selective catalyst to form 1,3-butadiene from ethanol. The optimal silver loading is 1-2 wt% on a MgO-silica support with a molar Mg/Si ratio of 2. The silver species and basic sites (Mg−O pairs and basic OH groups) are of prime importance in the 1,3-butadiene production, catalyzing mainly the ethanol dehydrogenation and the aldol condensation, respectively.


PLOS ONE | 2017

Changes in DNA Methylation in Mouse Lungs after a Single Intra-Tracheal Administration of Nanomaterials

Ali Mustafa Tabish; Katrien Poels; Hyang-Min Byun; Katrien Luyts; Andrea Baccarelli; Johan A. Martens; Stef Kerkhofs; Sven Seys; Peter Hoet; Lode Godderis

Aims This study aimed to investigate the effects of nanomaterial (NM) exposure on DNA methylation. Methods and Results Intra-tracheal administration of NM: gold nanoparticles (AuNPs) of 5-, 60- and 250-nm diameter; single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) at high dose of 2.5 mg/kg and low dose of 0.25 mg/kg for 48 h to BALB/c mice. Study showed deregulations in immune pathways in NM-induced toxicity in vivo. NM administration had the following DNA methylation effects: AuNP 60 nm induced CpG hypermethylation in Atm, Cdk and Gsr genes and hypomethylation in Gpx; Gsr and Trp53 showed changes in methylation between low- and high-dose AuNP, 60 and 250 nm respectively, and AuNP had size effects on methylation for Trp53. Conclusion Epigenetics may be implicated in NM-induced disease pathways.


Journal of Materials Chemistry B | 2015

Silica capsules enclosing P123 triblock copolymer micelles for flurbiprofen storage and release

Stef Kerkhofs; Fadila Saïdi; Niels Vandervoort; Guy Van den Mooter; Charlotte Martineau; Francis Taulelle; Johan A. Martens

Flurbiprofen was incorporated in 200-400 nm silica capsules filled with Pluronic P123 polyethylene oxide-polypropylene oxide-polyethylene oxide triblock copolymer. The assembly process of the capsules and the molecular organization of drug molecule, surfactant and silica were investigated using SAXS, TGA, SEM, DLS, DSC, 13C single-pulse, CPMAS and 1H-1H two-dimensional NMR. Flurbiprofen molecules are molecularly dispersed inside polypropylene cores of P123 surfactant micelles occluded in a 20-30 nm thick silica shell. Flurbiprofen molecules in polypropylene cores of P123 micelles exhibit high mobility and are easily released after introduction in simulated gastrointestinal fluid and the solubility limit is reached within minutes. Release rates are favored at high pH due to acid dissociation of the carboxylic acid group of the flurbiprofen molecule. The molecular environment of flurbiprofen in these P123 filled silica capsules is different from ordered mesoporous silica materials synthesized using P123 as sacrificial template having the drug molecules adsorbed on the silica surface of pore walls. These findings uncover a new concept of storage and release of hydrophobic bioactive molecules.


Mutation Research | 2017

Cyto-genotoxic and DNA methylation changes induced by different crystal phases of TiO2-np in bronchial epithelial (16-HBE) cells

Manosij Ghosh; Deniz Öner; Radu-Corneliu Duca; Stevan M. Cokic; Sven Seys; Stef Kerkhofs; Kirsten Van Landuyt; Peter Hoet; Lode Godderis

With the increase in use of TiO2-np, a better understanding of their safety is important. In the present study the effect of different crystal phases of TiO2-np (anatase, rutile and anatase: rutile mixture; 20-26nm) were studied for cyto-genotoxicity and global DNA methylation and hydroxymethylation. Cytotoxic response was observed at a concentration of 25μg/ml for the particles tested. Results of comet and micronucleus (with and without CytB) assays revealed significant genotoxic effect of these particles. Flow cytometry revealed cell cycle arrest in the S-phase. Based on the results, toxicity of the particles could be correlated with their physico-chemical properties (i.e. smaller size and hydrodynamic diameter and larger surface area), anatase form being the most toxic. From the results of the cyto-genotoxicity assays, concentrations were determined for the epigenetic study. Effect on global DNA methylation and hydroxymethylation levels were studied at cyto-genotoxic (25μg/ml), genotoxic (12.5μg/ml) and sub cyto-genotoxic (3.25μg/ml) concentrations using LC-MS/MS analysis. Though no significant changes were observed for 3h treatment schedule; significant hypomethylation were observed at 24h for anatase (significant at 3.25 and 25μg/ml), rutile (significant at 3.25 and 25μg/ml) and anatase: rutile mixture (significant at 25μg/ml) forms. The results suggest that epigenetic changes could occur at sub cyto-genotoxic concentrations. And hence for complete characterization of nanoparticle toxicity, epigenetic studies should be performed along with conventional toxicity testing methods.


Journal of Materials Chemistry | 2015

Hematite iron oxide nanorod patterning inside COK-12 mesochannels as an efficient visible light photocatalyst

Lik Hong Wee; Maria Meledina; Stuart Turner; Kathleen Custers; Stef Kerkhofs; G. Van Tendeloo; Johan A. Martens

The uniform dispersion of functional oxide nanoparticles inside ordered mesoporous silica to tailor optical, electronic, and magnetic properties for biomedical and environmental applications is a scientific challenge. Herein, we demonstrate for the very first time the morphological effect of platelet-driven confined growth of hematite iron oxide (α-Fe2O3) nanorods inside the mesochannels of ordered mesoporous silica COK-12 material denoted as α-Fe2O3@COK-12. The inclusion of the α-Fe2O3 nanorods in COK-12 particles is studied in detail using high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy-dispersive X-ray (EDX) spectroscopy and electron tomography. High resolution imaging and EDX spectroscopy provide information about the particle size, shape and crystal phase of the loaded α-Fe2O3 material, while electron tomography provides detailed information on the spreading of the nanorods throughout the COK-12 host in three-dimension. This nanocomposite material, having a semiconductor band gap energy of 2.50 eV according to diffuse reflectance spectroscopy, demonstrates an improved visible light photocatalytic degradation activity with rhodamine 6G and 1-adamantanol model compounds.


RSC Advances | 2016

Anatase TiO2 nanoparticle coating on porous COK-12 platelets as highly active and reusable photocatalysts

Lik Hong Wee; Maria Meledina; Stuart Turner; Kathleen Custers; Stef Kerkhofs; Sreeprasanth Pulinthanathu Sree; Elena Gobechiya; Christine E. A. Kirschhock; G. Van Tendeloo; Johan A. Martens

Nanoscale TiO2 photocatalysts are widely used for biomedical applications, self-cleaning processes and wastewater treatments. The impregnation/deposition of TiO2 nanoparticles is indispensable for facile handling and separation as well as the improvement of their photocatalytic performance. In the present study, ordered mesoporous COK-12 silica thin platelets with a high-aspect-ratio and rough surfaces are demonstrated as a potential nanoporous support for homogeneous TiO2 nanoparticle coatings with high loading up to 16.7 wt%. The photocatalytic composite of COK-12 platelets and TiO2 nanoparticles is characterized in detail by HRSEM, SAXS, XRD, N2 physisorption analysis, solid-state UV-vis spectroscopy, HAADF-STEM, EDX analysis, and electron tomography. HAADF-STEM-EDX and electron tomography studies reveal a homogeneous dispersion of nanosized TiO2 nanoparticles over COK-12 platelets. The final composite material with anatase TiO2 nanoparticles that demonstrate a blueshifted semiconductor band gap energy of 3.2 eV coated on a highly porous COK-12 support shows exceptional photocatalytic catalytic activity for photodegradation of organic dyes (rhodamine 6G and methylene blue) and an organic pollutant (1-adamantanol) under UV light radiation, outperforming the commercial P25 TiO2 (Degussa) catalyst.


Pest Management Science | 2018

Material properties determining the insecticidal activity of highly divided porous materials on the pharaoh ant (Monomorium pharaonis): Insecticidal porous materials for use on the pharaoh ant

Heleen Van Den Noortgate; Bert Lagrain; Sreeprasanth Pulinthanathu Sree; Stef Kerkhofs; Tom Wenseleers; Johan A. Martens

BACKGROUND Historically, inert insecticidal powders such as diatomaceous earth were researched for pest management applications, and it was revealed that these types of powders killed insects by desiccation. However, data on the critical material properties that affect their efficacy are sparse. The present study investigated the insecticidal effect of powdered materials on the pharaoh ant, a notorious domestic pest. RESULTS The insecticidal activity of 24 porous materials was tested. Eight of these materials performed better than the benchmark, diatomaceous earth. Zeolite Y and carbon black II performed best, inducing 50% mortality within 40 and 55 minutes, respectively. Statistical analysis of seven material properties revealed that macroporous surface area and Brunauer-Emmett-Teller (BET) specific surface area were most predictive of insecticidal activity. For zeolites and ordered mesoporous silica materials, the most important parameters were, respectively, BET and large mesopore surface area. Finally, gas chromatography-mass spectrometry (GC-MS) analysis confirmed the adsorption of epicuticular hydrocarbons onto the zeolite powders. CONCLUSION This study shows clear potential for the use of environmentally friendly, inert porous materials as insecticides against the pharaoh ant and identified the key material properties influencing insecticidal activity. The GC-MS data support the hypothesis that the mortality was caused by the removal of the protective epicuticular hydrocarbons.


RSC Advances | 2014

Single-step alcohol-free synthesis of core–shell nanoparticles of β-casein micelles and silica

Stef Kerkhofs; Frédéric R. Leroux; Lionel Allouche; Randy Mellaerts; Jasper Jammaer; Alexander Aerts; Christine E. A. Kirschhock; Pieter C. M. M. Magusin; Francis Taulelle; Sara Bals; Gustaaf Van Tendeloo; Johan A. Martens

A new, single-step protocol for wrapping individual nanosized β-casein micelles with silica is presented. This biomolecule-friendly synthesis proceeds at low protein concentration at almost neutral pH, and makes use of sodium silicate instead of the common silicon alkoxides. This way, formation of potentially protein-denaturizing alcohols can be avoided. The pH of the citrate-buffered synthesis medium is close to the isoelectric point of β-casein, which favours micelle formation. A limited amount of sodium silicate is added to the protein micelle suspension, to form a thin silica coating around the β-casein micelles. The size distribution of the resulting protein–silica structures was characterized using DLS and SAXS, as well as 1H NMR DOSY with a dedicated pulsed-field gradient cryo-probehead to cope with the low protein concentration. The degree of silica-condensation was investigated by 29Si MAS NMR, and the nanostructure was revealed by advanced electron microscopy techniques such as ESEM and HAADF-STEM. As indicated by the combined characterization results, a silica shell of 2 nm is formed around individual β-casein micelles giving rise to separate protein core–silica shell nanoparticles of 17 nm diameter. This alcohol-free method at mild temperature and pH is potentially suited for packing protein molecules into bio-compatible silica nanocapsules for a variety of applications in biosensing, therapeutic protein delivery and biocatalysis.


Inorganic Chemistry | 2017

Impact of Amino Acids on the Isomerization of the Aluminum Tridecamer Al13

Olivier Deschaume; Eric Breynaert; Sambhu Radhakrishnan; Stef Kerkhofs; Mohamed Haouas; Ségolène Adam de Beaumais; Valeria Manzin; Jean-Baptiste Galey; Laure Ramos-Stanbury; Francis Taulelle; Johan A. Martens; Carmen Bartic

The stability of the Keggin polycation ε-Al13 is monitored by 27Al NMR and ferron colorimetric assay upon heating aluminum aqueous solutions containing different amino acids with overall positive, negative, or no charge at pH 4.2. A focus on the effect of the amino acids on the isomerization process from ε- to δ-Al13 is made, compared and discussed as a function of the type of organic additive. Amino acids such as glycine and β-alanine, with only one functional group interacting relatively strongly with aluminum polycations, accelerate isomerization in a concentration-dependent manner. The effect of this class of amino acids is also found increasing with the pKa of their carboxylic acid moiety, from a low impact from proline up to more than a 15-fold increased rate from the stronger binders such as glycine or β-alanine. Amino acids with relatively low C-terminal pKa, but bearing additional potential binding moieties such as free alcohol (hydroxyl group) moiety of serine or the amide of glutamine, speed the isomerization comparatively and even more than glycine or β-alanine, glutamine leading to the fastest rates observed so far. With aspartic and glutamic acids, changes in aluminum speciation are faster and significant even at room temperature but rather related to the reorganization toward slow reacting complexed oligomers than to the Al13 isomerization process. The linear relation between the apparent rate constant of isomerization and the additive concentration points to a first-order process with respect to the additives. Most likely, the dominant process is an accelerated ε-Al13 dissociation, increasing the probability of δ isomer formation.


Chemistry: A European Journal | 2017

Alternating Copolymer of Double Four Ring Silicate and Dimethyl Silicone Monomer - PSS-1

Sam Smet; Steven Vandenbrande; Pieter Verlooy; Stef Kerkhofs; Eric Breynaert; Christine E. A. Kirschhock; Charlotte Martineau-Corcos; Francis Taulelle; Veronique Van Speybroeck; Johan A. Martens

A new copolymer consisting of double four ring (D4R) silicate units linked by dimethylsilicone monomer referred to as polyoligosiloxysilicone number one (PSS-1) was synthesized. The D4R building unit is provided by hexamethyleneimine cyclosilicate hydrate crystals, which were dehydrated and reacted with dichlorodimethylsilane. The local structure of D4R silicate units and dimethyl silicone monomers was revealed by multidimensional solid-state NMR, FTIR and modeling. On average, D4R silicate units have 6.8 silicone linkages. Evidence for preferential unidirectional growth and chain ordering within the PSS-1 copolymer was provided by STEM and TEM. The structure of PSS-1 copolymer consists of twisted columns of D4R silicate units with or without cross-linking. Both models are consistent with the spectroscopic, microscopic and physical properties. PSS-1 chains are predicted to be mechanically strong compared to silicones such as PDMS, yet more flexible than rigid silica materials such as zeolites.

Collaboration


Dive into the Stef Kerkhofs's collaboration.

Top Co-Authors

Avatar

Johan A. Martens

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Eric Breynaert

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Francis Taulelle

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Ekaterina Makshina

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Filip de Clippel

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Kristof Houthoofd

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Pieter Vanelderen

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Pieter Verlooy

Katholieke Universiteit Leuven

View shared research outputs
Top Co-Authors

Avatar

Wout Janssens

Katholieke Universiteit Leuven

View shared research outputs
Researchain Logo
Decentralizing Knowledge