Elena Benito-Peña

Solid-phase extraction of fluoroquinolones from aqueous samples using a water-compatible stochiometrically imprinted polymer

A novel and simple method for the selective cleanup and preconcentration of fluoroquinolone antibiotics in environmental water samples has been developed using molecularly imprinted polymer solid-phase extraction (MISPE). The molecularly imprinted polymer (MIP) has been prepared using enrofloxacin (ENR) as the template and a stoichiometric quantity of urea-based functional monomer to target the single oxyanionic moieties in the template molecule. The selectivity of the material for enrofloxacin, and structurally related and non-related compounds, has been evaluated using it as stationary phase in liquid chromatography. The novel polymer and the corresponding non-imprinted material (NIP) have been characterised using nitrogen adsorption-desorption isotherms and scanning electron microscopy. Various parameters affecting the extraction efficiency of the materials in the MISPE procedure were evaluated in order to achieve optimal preconcentration and to reduce non-specific interactions. The optimized MISPE/HPLC with fluorescence detection (FLD) method allows direct extraction of the antibiotics from the aqueous samples followed by a selective washing with acetonitrile/water (0.1M 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) buffer, pH 7.5) (10/90, v/v) and elution with 2% trifluoracetic acid in methanol. Good recoveries and precision, ranging between 66 and 100% (RSD: 2-12%, n=3) for danofloxacin, enrofloxacin, oxolinic acid and flumequine, and moderate recoveries (15-40%, RSD 4-9%, n=3) for norfloxacin, ciprofloxacin, lomefloxacin and sarafloxacin, have been obtained for river water samples fortified with 0.50, 0.75 and 1.0microgL(-1) of all the antibiotics. The method detection limits ranged between 0.01 and 0.30microgL(-1) for all the antibiotics tested, when 100mL water samples were processed. The results demonstrate the applicability of the optimized method for the selective extraction of fluoroquinolones in environmental water samples at the ngL(-1) level.

Multiresidue determination of ultratrace levels of fluoroquinolone antimicrobials in drinking and aquaculture water samples by automated online molecularly imprinted solid phase extraction and liquid chromatography.

The present work describes the development of a sensitive and highly selective innovative method for the simultaneous detection of six fluoroquinolone (FQ) antimicrobials (enrofloxacin, ciprofloxacin, norfloxacin, levofloxacin, danofloxacin, and sarafloxacin) in water samples. This detection is based on online solid phase extraction, coupled to liquid chromatography (LC), using for the first time tailor-made molecularly imprinted microspherical polymer particles prepared via precipitation polymerization. Various parameters affecting the extraction efficiency of the polymer have been optimized to reduce nonspecific interactions and to achieve selective uptake of the antibiotics from real samples. The method shows good recoveries ranging between 62% and 102% (V = 25 mL) for the different FQs tested and excellent interday and intraday precision with relative standard deviation (RSD) values between 2-5% and 2-6%, respectively. The detection limits were between 1-11 ng L(-1) (drinking water) and 1-12 ng L(-1) (fish farm water) when 25 mL samples were processed. The polymer showed selectivity for FQs containing a piperazine moiety whereas no retention was found for other antibiotics or nonrelated compounds. The method has been applied to the analysis of trace amounts of the FQs tested in drinking and fish farm water samples with excellent recoveries (>91%) and good precision (RSDs <5%).

Quantitative determination of penicillin V and amoxicillin in feed samples by pressurised liquid extraction and liquid chromatography with ultraviolet detection.

A rapid and simple method is proposed for the routine determination of amoxicillin (AMOX) and penicillin V (PENV) in swine feedingstuffs. The method is based on pressurised liquid extraction (PLE) followed by high performance liquid chromatography with ultraviolet detection (PLE-HPLC-UV) for antibiotic analysis. Parameters affecting PLE procedure, such as temperature, solvent composition, number of extraction cycles and sample cell size, were evaluated in order to achieve the highest extraction efficiency. The optimised method employed 11mL extraction cells, acetonitrile-water mixtures (25:75, v/v) for AMOX and (50:50, v/v) for PENV, as extraction solvent, 102.07atm of extraction pressure, 50 degrees C of extraction temperature, 5min of static time and 60% flush volume of the cell size. Extracts were filtered and directly analysed by HPLC-DAD/UV without further clean-up. Mean recovery rates for feed samples fortified with 200-500mgkg(-1) of both antibiotics were 86% for AMOX (RSD< or =6%) and 95% for PENV (RSD< or =3%). The method was successfully applied to the analysis of a commercial medicated swine feedingstuff, and the results were in good agreement with those obtained using mechanical shaking or ultrasonic extraction combined with solid phase extraction (UE-SPE), previously applied in the literature for feed analysis. The extraction efficiencies were evaluated by statistical comparison (analysis of variance, ANOVA-single factor) of the results obtained using the different extraction methods. Compared to the alternative techniques, PLE offers several practical advantages: easy to perform, fast, savings in solvent volume and in time, all steps are fully automated and further clean-up is not necessary for penicillin analysis.

InfoBiology by printed arrays of microorganism colonies for timed and on-demand release of messages

This paper presents a proof-of-principle method, called InfoBiology, to write and encode data using arrays of genetically engineered strains of Escherichia coli with fluorescent proteins (FPs) as phenotypic markers. In InfoBiology, we encode, send, and release information using living organisms as carriers of data. Genetically engineered systems offer exquisite control of both genotype and phenotype. Living systems also offer the possibility for timed release of information as phenotypic features can take hours or days to develop. We use growth media and chemically induced gene expression as cipher keys or “biociphers” to develop encoded messages. The messages, called Steganography by Printed Arrays of Microbes (SPAM), consist of a matrix of spots generated by seven strains of E. coli, with each strain expressing a different FP. The coding scheme for these arrays relies on strings of paired, septenary digits, where each pair represents an alphanumeric character. In addition, the photophysical properties of the FPs offer another method for ciphering messages. Unique combinations of excited and emitted wavelengths generate distinct fluorescent patterns from the Steganography by Printed Arrays of Microbes (SPAM). This paper shows a new form of steganography based on information from engineered living systems. The combination of bio- and “photociphers” along with controlled timed-release exemplify the capabilities of InfoBiology, which could enable biometrics, communication through compromised channels, easy-to-read barcoding of biological products, or provide a deterrent to counterfeiting.

Multiplexed salivary protein profiling for patients with respiratory diseases using fiber-optic bundles and fluorescent antibody-based microarrays.

Over the past 40 years, the incidence and prevalence of respiratory diseases have increased significantly throughout the world, damaging economic productivity and challenging health care systems. Current diagnoses of different respiratory diseases generally involve invasive sampling methods such as induced sputum or bronchoalveolar lavage that are uncomfortable, or even painful, for the patient. In this paper, we present a platform incorporating fiber-optic bundles and antibody-based microarrays to perform multiplexed protein profiling of a panel of six salivary biomarkers for asthma and cystic fibrosis (CF) diagnosis. The platform utilizes an optical fiber bundle containing approximately 50,000 individual 4.5 μm diameter fibers that are chemically etched to create microwells in which modified microspheres decorated with monoclonal capture antibodies can be deposited. On the basis of a sandwich immunoassay format, the array quantifies human vascular endothelial growth factor (VEGF), interferon gamma-induced protein 10 (IP-10), interleukin-8 (IL-8), epidermal growth factor (EGF), matrix metalloproteinase 9 (MMP-9), and interleukin-1 beta (IL-1β) salivary biomarkers in the subpicomolar range. Saliva supernatants collected from 291 individuals (164 asthmatics, 71 CF patients, and 56 healthy controls (HC)) were analyzed on the platform to profile each group of patients using this six-analyte suite. It was found that four of the six proteins were observed to be significantly elevated (p < 0.01) in asthma and CF patients compared with HC. These results demonstrate the potential to use the multiplexed protein array platform for respiratory disease diagnosis.

Application of bacteriophages in sensor development

Bacteriophage-based bioassays are a promising alternative to traditional antibody-based immunoassays. Bacteriophages, shortened to phages, can be easily conjugated or genetically engineered. Phages are robust, ubiquitous in nature, and harmless to humans. Notably, phages do not usually require inoculation and killing of animals; and thus, the production of phages is simple and economical. In recent years, phage-based biosensors have been developed featuring excellent robustness, sensitivity, and selectivity in combination with the ease of integration into transduction devices. This review provides a critical overview of phage-based bioassays and biosensors developed in the last few years using different interrogation methods such as colorimetric, enzymatic, fluorescence, surface plasmon resonance, quartz crystal microbalance, magnetoelastic, Raman, or electrochemical techniques.

Surface‐Imprinted Nanofilaments for Europium‐Amplified Luminescent Detection of Fluoroquinolone Antibiotics

The development and characterization of novel, molecularly imprinted polymer nanofilament-based optical sensors for the analysis of enrofloxacin, an antibiotic widely used for human and veterinary applications, is reported. The polymers were prepared by nanomolding in porous alumina by using enrofloxacin as the template. The antibiotic was covalently immobilized on to the pore walls of the alumina by using different spacers, and the prepolymerization mixture was cast in the pores and the polymer synthesized anchored onto a glass support through UV polymerization. Various parameters affecting polymer selectivity were evaluated to achieve optimal recognition, namely, the spacer arm length and the binding solvent. The results of morphological characterization, binding kinetics, and selectivity of the optimized polymer material for ENR and its derivatives are reported. For sensing purposes, the nanofilaments were incubated in solutions of the target molecule in acetonitrile/HEPES buffer (100 mM, pH 7.5, 50:50, v/v) for 20 min followed by incubation in a 10 mM solution of europium(III) ions to generate a europium(III)-enrofloxacin complex on the polymer surface. The detection event was based on the luminescence of the rare-earth ion (λexc=340 nm; λem=612 nm) that results from energy transfer from the antibiotic excited state to the metal-ion emitting excited state. The limit of detection of the enrofloxacin antibiotic was found to be 0.58 μM.

Furfural Determination with Disposable Polymer Films and Smartphone-Based Colorimetry for Beer Freshness Assessment

We have developed disposable color-changing polymeric films for quantification of furfural-a freshness indicator-in beer using a smartphone-based reader. The films are prepared by radical polymerization of 4-vinylaniline, as a furfural-sensitive indicator monomer, 2-hydroxymethyl methacrylate as a comonomer, and ethylene dimethyl methacrylate (EDMA) as a cross-linker. The sensing mechanism is based on the Stenhouse reaction in which aniline and furfural react in acidic media with the generation of a deep red cyanine derivative, absorbing at 537 nm, which is visible to the naked eye. The colorimetric response has been monitored using either a portable fiber-optic spectrophotometer or the built-in camera of a smartphone. Under the optimized conditions, a linear response to furfural in beer was obtained in the 39 to 500 μg L(-1) range, with a detection limit of 12 μg L(-1), thus improving the performance of other well-established colorimetric or chromatographic methods. The novel films are highly selective to furfural, and no cross-reactivity has been observed from other volatile compounds generated during beer aging. A smartphone application (app), developed for Android platforms, measures the RGB color coordinates of the sensing membranes after exposure to the analyte. Following data processing, the signals are converted into concentration values by preloaded calibration curves. The method has been applied to determination of furfural in pale lager beers with different storage times at room temperature. A linear correlation (r > 0.995) between the storage time and the furfural concentration in the samples has been confirmed; our results have been validated by HPLC with diode-array detection.

Molecularly imprinted hydrogels as functional active packaging materials

This paper describes the synthesis of novel molecularly imprinted hydrogels (MIHs) for the natural antioxidant ferulic acid (FA), and their application as packaging materials to prevent lipid oxidation of butter. A library of MIHs was synthesized using a synthetic surrogate of FA, 3-(4-hydroxy-3-methoxyphenyl)propionic acid (HFA), as template molecule, ethyleneglycol dimethacrylate (EDMA) as cross-linker, and 1-allylpiperazine (1-ALPP) or 2-(dimethylamino)ethyl methacrylate (DMAEMA), in combination with 2-hydroxyethyl methacrylate (HEMA) as functional monomers, at different molar concentrations. The DMAEMA/HEMA-based MIHs showed the greatest FA loading capacity, while the 1-ALLP/HEMA-based polymers exhibited the highest imprinting effect. During cold storage, FA-loaded MIHs protected butter from oxidation and led to TBARs values that were approximately half those of butter stored without protection and 25% less than those recorded for butter covered with hydrogels without FA, potentially extending the shelf life of butter. Active packaging is a new field of application for MIHs with great potential in the food industry.

Fluorescence based fiber optic and planar waveguide biosensors. A review.

Abstract The application of optical biosensors, specifically those that use optical fibers and planar waveguides, has escalated throughout the years in many fields, including environmental analysis, food safety and clinical diagnosis. Fluorescence is, without doubt, the most popular transducer signal used in these devices because of its higher selectivity and sensitivity, but most of all due to its wide versatility. This paper focuses on the working principles and configurations of fluorescence-based fiber optic and planar waveguide biosensors and will review biological recognition elements, sensing schemes, as well as some major and recent applications, published in the last ten years. The main goal is to provide the reader a general overview of a field that requires the joint collaboration of researchers of many different areas, including chemistry, physics, biology, engineering, and material science.