Ennio Bramanti

Schneider membrane elevation in presence of sinus septa: Anatomic features and surgical management

Maxillary sinus floor elevation via a lateral approach is a predictable technique to increase bone volume of the edentulous posterior maxilla and consequently for dental implants placement. The sinus floor is elevated and it can be augmented with either autologous or xenogeneic bone grafts following an opening bone window created on the facial buccal wall. Maxillary septa are walls of cortical bone within the maxillary sinus. The septa shape has been described as an inverted gothic arch arising from the inferior or lateral walls of the sinus and may even divide the sinus into two or more cavities. Some authors have reported a higher prevalence of septa in atrophic edentulous areas than in nonatrophic ones. Radiographic identification of these structures is important in order to perform the right design of the lateral window during sinus lift. Aim of this investigation is to highlight the correct steps for doing sinus lift surgery in presence of those anatomic variations. Clinicians should always perform clinical and radiographic diagnosis in order to avoid complications related to the sinus lift surgery.

Periodontal health and caries prevalence evaluation in patients affected by Parkinson's disease.

Parkinsons disease (PD) is a progressive neurodegenerative disorder related to the loss or absence of dopaminergic neurons in the brain. These deficits result in slowness of movement, tremor, rigidity, and dysfunction of behaviour. These symptoms negatively influence the patients capability to carry out the daily oral hygiene manoeuvres. The aim of this work is to record the oral health condition of PD patients evaluated at the IRCSS Bonino-Puleio in Messina. The oral health of 45 consecutive PD patients (study group) with neurologic diagnosis based on United Kingdom Brain Bank Criteria has been compared with that of another 45 no PD patients of the same age (control group). The evaluation of the general oral condition was recorded underlining tooth loss, active periodontal disease, and presence of untreated caries. The frequency of untreated caries, periodontal diseases, and missing teeth of the study group was significantly higher than in control group. Based on the data results, clinicians should direct high attention to the oral hygiene of patients with PD, above all at the early stages of the caries or periodontal disease, in order to prevent serious evolution of those pathologic dental conditions that may finally result in the tooth extraction event.

Dentin Morphology of Root Canal Surface: A Quantitative Evaluation Based on a Scanning Electronic Microscopy Study

Dentin is a vital, hydrated composite tissue with structural components and properties that vary in the different topographic portions of the teeth. These variations have a significant implication for biomechanical teeth properties and for the adhesive systems utilized in conservative dentistry. The aim of this study is to analyse the root canal dentin going from coronal to apical zone to find the ratio between the intertubular dentin area and the surface occupied by dentin tubules varies. Observations were conducted on 30 healthy premolar teeth extracted for orthodontic reasons in patients aged between 10 and 14. A SEM analysis of the data obtained in different canal portions showed that, in the coronal zone, dentinal tubules had a greater diameter (4.32 μm) than the middle zone (3.74 μm) and the apical zone (1.73 μm). The average number of dentinal tubules (in an area of 1 mm2) was similar in coronal zone (46,798 ± 10,644) and apical zone (45,192 ± 10,888), while in the middle zone they were lower in number (30,940 ± 7,651). However, intertubular dentin area was bigger going from apical to coronal portion. The differences between the analysed areas must be considered for the choice of the adhesive system.

Tooth auto-transplantation as an alternative treatment option: A literature review

Rapidly evolving implantation and alveolar ridge reconstruction techniques created a new area in modern dentistry where tooth loss is no longer a problem. Endless variations of implants length, diameter, surface, and design along with autogenous, alogenous, aloplastic, or xenogenous bone substitutes made it possible to recreate physiological occlusion, esthetic and masticatory function. However, none of nowadays technologies in implant dentistry have the potential to adapt to a growth and development changes of a childs jaw. Therefore, patients young age is a restriction for implantation and a particular challenge for a dentist willing to restore missing tooth. Thus, tooth auto-transplantation can be a good choice for treatment. The objective of this review is to underline the biologic principles required for successful auto-transplantation of teeth. Limits, indications, technique, and prognosis will be analyzed.

Analysis of the characteristics of slot design affecting resistance to sliding during active archwire configurations

BackgroundDuring orthodontic treatment, a low resistance to slide (RS) is desirable when sliding mechanics are used. Many studies showed that several variables affect the RS at the bracket-wire interface; among these, the design of the bracket slot has not been deeply investigated yet. This study aimed to clarify the effect of different slot designs on the RS expressed by five types of low-friction brackets in vertical and horizontal active configurations of the wire.MethodsFive low-friction brackets (Damon SL II, Ormco, Orange, CA, USA; In-Ovation, GAC International, Bohemia, NY, USA; Quick, Forestadent, Pforzheim, Germany; Time 2, AO, Sheboygan, WI, USA; Synergy, RMO, Denver, CO, USA) coupled with an 0.014-in NiTi thermal wire (Therma-Lite, AO) were tested in two three-bracket experimental models simulating vertical and horizontal bracket displacements. A custom-made machine was used to measure frictional resistance with tests repeated on ten occasions for each bracket-wire combination. Design characteristics such as the mesio-distal slot width, slot depth, and presence of chamfered edges at the extremities of the slot were evaluated on SEM images (SUPRA, Carl Zeiss, Oberkochen, Germany) and analyzed in relation to the data of RS recorded.ResultsTime 2 was found to show the higher frictional forces (1.50 and 1.35 N) in both experimental models (p < 0.05), while Quick and Synergy brackets showed the lower frictional values in the vertical (0.66 N) and in the horizontal (0.68 N) bracket displacements, respectively. With vertically displaced brackets, the increased mesio-distal slot width and the presence of clear angle at mesial and distal slot edges increase the values of RS. With brackets horizontally displaced, the RS expressed by the wire is influenced simultaneously by the depth of the slot, the mesio-distal slot width, and the presence of clear angle at the extremities of the slot base, the clip, or the slide.ConclusionIn order to select the proper low-friction bracket system, clinicians should consider specific characteristics of slot design apart from the wire engaging method.

Atomic force microscopy of bacteria from periodontal subgingival biofilm: Preliminary study results

Objective : Atomic force microscope (AFM) is a technology that allows analysis of the nanoscale morphology of bacteria within biofilm and provides details that may be better useful for understanding the role of bacterial interactions in the periodontal disease. Material and Methods : Five patients with periodontal ≥5 mm pockets diagnosed as generalized periodontitis and five patients with slight gingivitis were selected for the investigation. Bacteria biofilms were collected and morphologically investigated by AFM application. Results : The investigation revealed how periodontitis bacteria are characterized by specific morphologic features of the cell wall. The major representative species of bacteria causing periodontal diseases have been reproduced by a three-dimensional reconstruction showing the bacteria surface details. Conclusions : The presence of complex glycocalyx structures, bacteriophage-like vesicles, spirochetes (classic and cystic morphology) and bacterial co-aggregation has been identified by the AFM analysis. The results suggest that AFM is a reliable technique for studying bacterial morphology and for examining microbial interactions in dental plaque.

FEM and Von Mises Analysis on Prosthetic Crowns Structural Elements: Evaluation of Different Applied Materials

The aim of this paper is to underline the mechanical properties of dental single crown prosthodontics materials in order to differentiate the possibility of using each material for typical clinical condition and masticatory load. Objective of the investigation is to highlight the stress distribution over different common dental crowns by using computer-aided design software and a three-dimensional virtual model. By using engineering systems of analyses like FEM and Von Mises investigations it has been highlighted the strength over simulated lower first premolar crowns made by chrome cobalt alloy, golden alloy, dental resin, and zirconia. The prosthodontics crown models have been created and put on simulated chewing stresses. The three-dimensional models were subjected to axial and oblique forces and both guaranteed expected results over simulated masticatory cycle. Dental resin presented the low value of fracture while high values have been recorded for the metal alloy and zirconia. Clinicians should choose the better prosthetic solution for the teeth they want to restore and replace. Both prosthetic dental crowns offer long-term success if applied following the manufacture guide limitations and suggestions.

Clinical Evaluation of Specific Oral Manifestations in Pediatric Patients with Ascertained versus Potential Coeliac Disease: A Cross-Sectional Study.

Patients involved on coeliac disease (CD) have atypical symptoms and often remain undiagnosed. Specific oral manifestations are effective risk indicators of CD and for this reason an early diagnosis with a consequent better prognosis can be performed by the dentist. There are not researches analysing the frequency of these oral manifestations in potential coeliac patients. The aim of this study is to investigate the oral hard and soft tissue lesions in potential and ascertained coeliac children in comparison with healthy controls. 50 ascertained children, 21 potential coeliac patients, and 54 controls were recruited and the oral examination was performed. The overall oral lesions were more frequently present in CD patients than in controls. The prevalence of oral soft tissue lesions was 62% in ascertained coeliac, 76.2% in potential coeliac patients, and 12.96% in controls (P < 0.05). Clinical dental delayed eruption was observed in 38% of the ascertained coeliac and 42.5% of the potential coeliac versus 11.11% of the controls (P < 0.05). The prevalence of specific enamel defects (SED) was 48% in ascertained coeliac and 19% in potential coeliac versus 0% in controls (P < 0.05; OR = 3.923). The SED seem to be genetically related to the histological damage and villous atrophy.

Fem and Von Mises Analysis of OSSTEM Dental Implant Structural Components: Evaluation of Different Direction Dynamic Loads

Purpose: The objective of this investigation is to study prosthodontics and internal components resistance to the masticatory stress and considering different force directions by using Finite Element Method analysis (FEM). The structural materials of the components are usually Titanium alloy grade 4 or 5 and thus, guarantee the integration of the fixture in the bone due to the osteointegration phenomena. Even if the long-term dental implant survival rate is easy to be obtained and confirmed by numerous researches, the related clinical success, due to the alteration of the mechanical and prosthodontics components is still controversial. Methods: By applying engineering systems of investigations like FEM and Von Mises analyses, it has been investigated how dental implant material was held against the masticatory strength during the dynamic masticatory cycles. A three-dimensional system involved fixture, abutment and the connection screws, which were created and analyzed. The elastic features of the materials used in the study were taken from recent literature data. Results: Data revealed a different response for both types of devices, although implant neck and dental abutment showed better results for all conditions of loading while the abutment screw represented aweak point of the system. Conclusion: The data of this virtual model showed all the features of different prosthetic retention systems under the masticatory load. Clinicians should find better prosthetic balance in order to better distribute the stress over the component and to guarantee patients’ clinical long-term results.

Facial Bone Reconstruction Using both Marine or Non-Marine Bone Substitutes: Evaluation of Current Outcomes in a Systematic Literature Review

The aim of the present investigation was to systematically analyse the literature on the facial bone reconstruction defect using marine collagen or not and to evaluate a predictable treatment for their clinical management. The revision has been performed by searched MEDLINE and EMBASE databases from 2007 to 2017. Clinical trials and animal in vitro studies that had reported the application of bone substitutes or not for bone reconstruction defect and using marine collagen or other bone substitute material were recorded following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The first selection involved 1201 citations. After screening and evaluation of suitability, 39 articles were added at the revision process. Numerous discrepancies among the papers about bone defects morphology, surgical protocols, and selection of biomaterials were found. All selected manuscripts considered the final clinical success after the facial bone reconstruction applying bone substitutes. However, the scientific evidence regarding the vantage of the appliance of a biomaterial versus autologous bone still remains debated. Marine collagen seems to favor the dimensional stability of the graft and it could be an excellent carrier for growth factors.