Floriana Lauritano

The use of virtual surgical planning and navigation in the treatment of orbital trauma

Virtual surgical planning (VSP) has recently been introduced in craniomaxillofacial surgery with the goal of improving efficiency and precision for complex surgical operations. Among many indications, VSP can also be applied for the treatment of congenital and acquired craniofacial defects, including orbital fractures. VSP permits the surgeon to visualize the complex anatomy of craniofacial region, showing the relationship between bone and neurovascular structures. It can be used to design and print using three-dimensional (3D) printing technology and customized surgical models. Additionally, intraoperative navigation may be useful as an aid in performing the surgery. Navigation is useful for both the surgical dissection as well as to confirm the placement of the implant. Navigation has been found to be especially useful for orbit and sinus surgery. The present paper reports a case describing the use of VSP and computerized navigation for the reconstruction of a large orbital floor defect with a custom implant.

FEM and Von Mises Analysis on Prosthetic Crowns Structural Elements: Evaluation of Different Applied Materials

The aim of this paper is to underline the mechanical properties of dental single crown prosthodontics materials in order to differentiate the possibility of using each material for typical clinical condition and masticatory load. Objective of the investigation is to highlight the stress distribution over different common dental crowns by using computer-aided design software and a three-dimensional virtual model. By using engineering systems of analyses like FEM and Von Mises investigations it has been highlighted the strength over simulated lower first premolar crowns made by chrome cobalt alloy, golden alloy, dental resin, and zirconia. The prosthodontics crown models have been created and put on simulated chewing stresses. The three-dimensional models were subjected to axial and oblique forces and both guaranteed expected results over simulated masticatory cycle. Dental resin presented the low value of fracture while high values have been recorded for the metal alloy and zirconia. Clinicians should choose the better prosthetic solution for the teeth they want to restore and replace. Both prosthetic dental crowns offer long-term success if applied following the manufacture guide limitations and suggestions.

Prognostic value of HMGB1 and oxidative stress markers in multiple trauma patients: A single-centre prospective study

Serious multiple traumatic injuries may rapidly become fatal or be complicated by a life-threatening sequelae leading to a significant increase of the mortality rate. Trauma scoring systems are used to evaluate the critical status of the patient and recently many different biomarkers have been taken into account to better estimate the potential clinical outcome. The aim of the present study is to analyse the expression pattern of high-mobility group box-1 (HMGB1), oxidative stress markers and nuclear factor erythroid 2-related (Nrf2) in critically ill traumatic patients (at hospital admittance and after 6 and 24 h), in order to find out their potential role as early post-traumatic predictors markers. Forty-seven patients admitted for multiple trauma and 15 healthy participants were prospectively recruited. Eight patients (17%) died within 92 h of admission; this subgroup of patients presented the highest severity scores and their HMGB1 expression levels were significantly correlated with ISS, whereas patients with higher ISS exhibited higher levels of HMGB1 (P <0.001). Our study suggests the role of HMGB1 as a predictive biomarker of outcome in injured patients and hypothesizes the protective role of Nrf2 in bringing down the oxidative stress and HMGB1 release; measuring HMGB1 in combination with Nrf2 might represent a potentially useful tool in the early detection of post-trauma complications.

Fem and Von Mises Analysis of OSSTEM Dental Implant Structural Components: Evaluation of Different Direction Dynamic Loads

Purpose: The objective of this investigation is to study prosthodontics and internal components resistance to the masticatory stress and considering different force directions by using Finite Element Method analysis (FEM). The structural materials of the components are usually Titanium alloy grade 4 or 5 and thus, guarantee the integration of the fixture in the bone due to the osteointegration phenomena. Even if the long-term dental implant survival rate is easy to be obtained and confirmed by numerous researches, the related clinical success, due to the alteration of the mechanical and prosthodontics components is still controversial. Methods: By applying engineering systems of investigations like FEM and Von Mises analyses, it has been investigated how dental implant material was held against the masticatory strength during the dynamic masticatory cycles. A three-dimensional system involved fixture, abutment and the connection screws, which were created and analyzed. The elastic features of the materials used in the study were taken from recent literature data. Results: Data revealed a different response for both types of devices, although implant neck and dental abutment showed better results for all conditions of loading while the abutment screw represented aweak point of the system. Conclusion: The data of this virtual model showed all the features of different prosthetic retention systems under the masticatory load. Clinicians should find better prosthetic balance in order to better distribute the stress over the component and to guarantee patients’ clinical long-term results.

Sinus Lift Augmentation by Using Calcium Sulphate. A Retrospective 12 Months Radiographic Evaluation Over 25 Treated Italian Patients

Purpose: The aim of this investigation was to assess bone healing of sinus lift procedure in which the augmentation has been performed by using calcium sulphate like bone substitutes. The methods of this investigation how the use of Cone Beam Computed Tomography (CBCT) may be a valid instrument to support reconstructive surgery of the jaws. Patients and Methodology: 25 Patients presented large bone defects after tooth extractions located in the upper jaw posterior area. Vertical bone volume was assessed by CBCT examinations before and about six months after sinus lift surgery. Results: Examined defects treated with sinus lift surgery and evaluated by CBCT showed a strong increasing on the bone volume at 6 months follow up control. Conclusion: Calcium sulphate application in sinus lift surgery represent a safe and predictable option in the place of autologous bone. Therefore the application of CBCT investigation may give the clinicians the opportunity of evaluating with high precision value, the consistence of the bone defects before the surgery.

Facial Bone Reconstruction Using both Marine or Non-Marine Bone Substitutes: Evaluation of Current Outcomes in a Systematic Literature Review

The aim of the present investigation was to systematically analyse the literature on the facial bone reconstruction defect using marine collagen or not and to evaluate a predictable treatment for their clinical management. The revision has been performed by searched MEDLINE and EMBASE databases from 2007 to 2017. Clinical trials and animal in vitro studies that had reported the application of bone substitutes or not for bone reconstruction defect and using marine collagen or other bone substitute material were recorded following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The first selection involved 1201 citations. After screening and evaluation of suitability, 39 articles were added at the revision process. Numerous discrepancies among the papers about bone defects morphology, surgical protocols, and selection of biomaterials were found. All selected manuscripts considered the final clinical success after the facial bone reconstruction applying bone substitutes. However, the scientific evidence regarding the vantage of the appliance of a biomaterial versus autologous bone still remains debated. Marine collagen seems to favor the dimensional stability of the graft and it could be an excellent carrier for growth factors.

Histomorhological and clinical evaluation of maxillary alveolar ridge reconstruction after craniofacial trauma by applying combination of allogeneic and autogenous bone graft

A variety of techniques and materials for the rehabilitation and reconstruction of traumatized maxillary ridges prior to dental implants placement have been described in literature. Autogenous bone grafting is considered ideal by many researchers and it still remains the most predictable and documented method. The aim of this report is to underline the effectiveness of using allogeneic bone graft for managing maxillofacial trauma. A case of a 30-year-old male with severely atrophic maxillary ridge as a consequence of complex craniofacial injury is presented here. Augmentation procedure in two stages was performed using allogeneic and autogenous bone grafts in different areas of the osseous defect. Four months after grafting, during the implants placement surgery, samples of both sectors were withdrawn and submitted to histological evaluation. On the examination of the specimens, treated by hematoxylin and eosin staining, the morphology of integrated allogeneic bone grafts was revealed to be similar to the autologous bone. Our clinical experience shows how the allogeneic bone graft presented normal bone tissue architecture and is highly vascularized, and it can be used for reconstruction of severe trauma of the maxilla.

Extraoral surgical approach of ectopic mandibular third molar to the lower border of mandible.

AbstractThe surgical removal of impacted lower third molar is an ordinary intervention. The treatment of choice in this pathology is an intraoral or, seldom, extraoral surgical approach. Various surgical procedures have been described to remove ectopic mandibular teeth. The more common technique is an intraoral approach (so named “conservative”), even when the tooth is located in an ectopic area. However, the “intraoral approach” is often related with the difficulty of view, the bleeding of the surgical site, and with the possible lesions of inferior alveolar or lingual nerve. From the other side, a nonconservative surgical approach like “extraoral pathway” may be associated with no aesthetic cutaneous postoperative scar tissue. The aim of those 2 study cases is to highlight the management of infected ectopic third molars located close to the lower border of the mandibular body, underlining the anatomical land markers of the submandibular area. The authors have applied the extraoral pathway using an incision of small size. From our analysis, the treatment of those typical can be managed by using a “mini-skin-incision” (so termed as mini-submandibular approach) respecting the cosmetic expectations of the patients.

Implantology and Periodontal Disease: The Panacea to Problem Solving?

Introduction: The specialty of periodontology has changed dramatically in recent years. With the long-standing goal of retaining teeth in a functional and esthetical state, the periodontology has developed a high level of expertise in the regeneration of bone and connective tissues that support the teeth. However, periodontists have also joined maxillofacial surgeons as the primary providers of implant surgery. Methods: The tremendous innovations of periodontists induced also by the marketplace resulted in predictable periodontal treatment outcomes for most patients by the implants led to a dramatically different marketplace in which many patients with periodontitis can be treated by the implants rather than the traditional periodontal treatment. Results: The aim of this article is to focus on the innovator’s dilemma for periodontists today is that key elements of our rewarding contributions to dentistry in recent decades are unlikely to be part of a strong and rewarding future for the profession. Conclusions: With the intriguing role of the personalized medicine approach that integrates genomic and clinical information to predict a possible predisposition, we do not suggest a reduced role for periodontists in dental implant surgery but rather a more prominent role in complex cases to achieve surgical implant needs and proper reconstruction and long-term maintenance of the patient’s health.

Histomorphometric Evaluation of Two Different Bone Substitutes in Sinus Floor Augmentation Procedures.

The aim of this study is to compare the histomorphometric data of deproteinized bovine bone (DBB) and a fully synthetic bone substitute, poly (lactic-co-glycolic) acid/hydroxyapatite (PLGA/HA) applied for sinus floor augmentation technique. Twelve maxillary atrophic ridges of 8 patients requiring major maxillary sinus floor augmentation were studied; the sites were randomly assigned to the study groups and reexamined at 6 months after grafting using cone beam computed tomography scans and biopsy samples harvested during dental implant placement. Total bone volume, residual graft material volume, and new bone volume were assessed. Measurable biopsies were available from 67% of test sites and 100% of control sites. Poly (lactic-co-glycolic) acid/hydroxyapatite grafts showed no trace of graft material, whereas DBB grafts had a mean graft area of 16.60%. Mean percent of newly formed bone tended to be greater for PLGA/HA than for DBB group. Mean total bone volume percent did not differ significantly: PLGA/HA = 44.45% (CI, 16.42-72.48), DBB = 44.11% (CI, 36.61-51.60). Deproteinized bovine bone and PLGA/HA produced similar total bone volumes. Poly (lactic-co-glycolic) acid/hydroxyapatite appeared to be completely replaced by newly formed bone, whereas DBB presented significant amounts of residual graft material. Poly (lactic-co-glycolic) acid/hydroxyapatite necessitates of more clinical trials to be considered suitable for sinus floor augmentation.