Eric J. Tremblay

Planar micro-optic solar concentrator

We present a new approach to solar concentration where sunlight collected by each lens in a two-dimensional lens array is coupled into a shared, planar waveguide using localized features placed at each lens focus. This geometry yields a thin, flat profile for moderate concentration systems which may be fabricated by low-cost roll manufacture. We provide analyses of tradeoffs and show optimized designs can achieve 90% and 82% optical efficiency at 73x and 300x concentration, respectively. Finally, we present preliminary experimental results of a concentrator using self-aligned reflective coupling features fabricated by exposing molded SU-8 features through the lens array.

Ultrathin cameras using annular folded optics

We present a reflective multiple-fold approach to visible imaging for high-resolution, large aperture cameras of significantly reduced thickness. This approach allows for reduced bulk and weight compared with large high-quality camera systems and improved resolution and light collection compared with miniature conventional cameras. An analysis of the properties of multiple-fold imagers is presented along with the design, fabrication, and testing of an eightfold prototype camera. This demonstration camera has a 35 mm effective focal length, 0.7 NA, and 27 mm effective aperture folded into a 5 mm total thickness.

Orthogonal and secondary concentration in planar micro-optic solar collectors

Planar micro-optic concentrators are passive optical structures which combine a lens array with faceted microstructures to couple sunlight into a planar slab waveguide. Guided rays propagate within the slab to edge-mounted photovoltaic cells. This paper provides analysis and preliminary experiments describing modifications and additions to the geometry which increase concentration ratios along both the vertical and orthogonal waveguide axes. We present simulated results for a 900x concentrator with 85% optical efficiency, measured results for small-scale experimental systems and briefly discuss implementations using low-cost fabrication on continuous planar waveguides.

Two-axis solar tracking accomplished through small lateral translations

High-concentration solar-power optics require precise two-axis tracking. The planar micro-optic solar concentrator uses a lenslet array over a planar waveguide with small reflective facets at the focal point of each lenslet to couple incident light into the waveguide. The concentrator can use conventional tracking, tilting the entire assembly, but the system geometry also allows tracking by small lateral translation of the lenslet relative to the waveguide. Here, we experimentally demonstrate such microtracking with the existing concentrator optics and present optimized optical designs for systems with higher efficiency and angle range.

Reactive self-tracking solar concentrators: concept, design, and initial materials characterization

Étendue limits angular acceptance of high-concentration photovoltaic systems and imposes precise two-axis mechanical tracking. We show how a planar micro-optic solar concentrator incorporating a waveguide cladding with a nonlinear optical response to sunlight can reduce mechanical tracking requirements. Optical system designs quantify the required response: a large, slow, and localized increase in index of refraction. We describe one candidate materials system: a suspension of high-index particles in a low-index fluid combined with a localized space-charge field to increase particle density and average index. Preliminary experiments demonstrate an index change of aqueous polystyrene nanoparticles in response to a low voltage signal and imply larger responses with optimized nanofluidic materials.

Design and scaling of monocentric multiscale imagers

Monocentric multi-scale (MMS) lenses are a new approach to high-resolution wide-angle imaging, where a monocentric objective lens is shared by an array of identical rotationally symmetric secondary imagers that each acquire one overlapping segment of a mosaic. This allows gigapixel images to be computationally integrated from conventional image sensors and relatively simple optics. Here we describe the MMS design space, introducing constraints on image continuity and uniformity, and show how paraxial system analysis can provide both volume scaling and a systematic design methodology for MMS imagers. We provide the detailed design of a 120° field of viewimager (currently under construction) resolving 2 gigapixels at 41.5 μrad instantaneous field of view, and demonstrate reasonable agreement with the first-order scaling calculation.

Switchable telescopic contact lens

We present design and first demonstration of optics for a telescopic contact lens with independent optical paths for switching between normal and magnified vision. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8 x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision. We present an experimental demonstration of the contact lens mounted on a life-sized optomechanical model eye and, using a pair of modified commercial 3D television glasses, demonstrate electrically operated polarization switching between normal and magnified vision.

Microcamera aperture scale in monocentric gigapixel cameras

Multiscale cameras achieve wide-angle, high-resolution imaging by combining coarse image formation by a simplified wide-field objective with localized aberration correction in an array of narrow field microcameras. Microcamera aperture size is a critical parameter in multiscale design; a larger aperture has greater capacity to correct aberration but requires a more complex microcamera optic. A smaller aperture requires integration of more microcameras to cover the field. This paper analyzes multiscale system performance as a function of microcamera aperture for 2 and 40 gigapixel monocentric objective lenses. We find that microcamera aperture diameters of 3 to 12 mm paired with complementary metal oxide semiconductor sensors in the 1 to 15 megapixel range are most attractive for gigapixel-scale cameras.

Robotic laser tissue welding of sclera using chitosan films.

To demonstrate the feasibility of scleral wound closure using a novel adhesive made of chitosan film.

Relaxing the alignment and fabrication tolerances of thin annular folded imaging systems using wavefront coding

Annular folded imagers can be up to 10x thinner than corresponding full-aperture imagers, but have tight fabrication tolerances and relatively shallow depth of focus. Wavefront coding, the use of specialized optics with postdetection signal processing, has been used to improve the depth of focus in full-aperture imaging systems. Here we explore the application of wavefront coding to annular folded optics. We compare the design and experimental results for an imaging system with a 38 mm focal length and just 5 mm total track.