Erik Gabrielsson

Chemical and Light‐Driven Oxidation of Water Catalyzed by an Efficient Dinuclear Ruthenium Complex

Chemical and light-driven oxidation of water catalyzed by an efficient dinuclear ruthenium complex

Phenoxazine Dyes for Dye‐Sensitized Solar Cells: Relationship Between Molecular Structure and Electron Lifetime

A series of metal-free organic dyes with a core phenoxazine chromophore have been synthesized and tested as sensitizers in dye-sensitized solar cells. Overall conversion efficiencies of 6.03-7.40% were reached under standard AM 1.5G illumination at a light intensity of 100 mW cm(-2) . A clear trend in electron lifetime could be seen; a dye with a furan-conjugated linker showed a shorter lifetime relative to dyes with the acceptor group directly attached to the phenoxazine. The addition of an extra donor unit, which bore insulating alkoxyl chains, in the 7-position of the phenoxazine could increase the lifetime even further and, together with additives in the electrolyte to raise the conduction band, an open circuit voltage of 800 mV could be achieved. From photoelectron spectroscopy and X-ray absorption spectroscopy of the dyes adsorbed on TiO(2) particles, it can be concluded that the excitation is mainly of cyano character (i.e., on average, the dye molecules are standing on, and pointing out, from the surface of TiO(2) particles).

A thiolate/disulfide ionic liquid electrolyte for organic dye-sensitized solar cells based on Pt-free counter electrodes

The ionic liquid, 1-ethyl-3-methylimidazolium tetracyanoborate, was employed to prepare a thiolate/disulfide ionic liquid electrolyte with low viscosity for organic dye-sensitized solar cells (DSCs). CoS was introduced and showed better photovoltaic performance in DSCs than the ubiquitous platinized FTO CE.

Photoisomerization of the cyanoacrylic acid acceptor group – a potential problem for organic dyes in solar cells

Organic solar cell dyes containing the most common anchoring group, cyanoacrylic acid, are shown to be photolabile and undergo photoisomerization. This may have significant consequences for dye-sensitized solar cells, as isomerisation competes with electron injection and leads to modifications of the dye and surface arrangement.

Immobilization of a Molecular Ruthenium Catalyst on Hematite Nanorod Arrays for Water Oxidation with Stable Photocurrent

Photoelectrochemical (PEC) cells for light-driven water splitting are prepared using hematite nanorod arrays on conductive glass as the photoanode. These devices improve the photocurrent of the hematite-based photoanode for water splitting, owing to fewer surface traps and decreased electron recombination resulting from the one-dimensional structure. By employing a molecular ruthenium co-catalyst, which contains a strong 2,6-pyridine-dicarboxylic acid anchoring group at the hematite photoanode, the photocurrent of the PEC cell is enhanced with high stability for over 10 000 s in a 1 m KOH solution. This approach can pave a route for combining one-dimensional nanomaterials and molecular catalysts to split water with high efficiency and stability.

An organic hydrophilic dye for water-based dye-sensitized solar cells

In this study we report the first organic hydrophilic dye employed for 100% water-based electrolyte DSSCs. We show that the replacement of alkyl by glycolic chains in the dye structure is able to provide excellent wettability, resulting in an efficient system with remarkably reduced desorption problems that allowed us to perform tests over a wide pH range. By changing the electrolyte composition, employing chenodeoxycholic acid as a co-adsorbent and using PEDOT counter-electrodes, 3% power conversion efficiency under 1-sun illumination was obtained. We show that chenodeoxycholic acid does not significantly increase the wettability, and we provide new insights into the higher performance resulting from its co-adsorption.

Tetrathiafulvalene as a one-electron iodine-free organic redox mediator in electrolytes for dye-sensitized solar cells

Tetrathiafulvalene (TTF) was investigated as an organic iodine-free redox mediator in electrolytes for dye-sensitized, nanocrystalline solar cells (DSCs) and was compared to the commonly used iodide/triiodide system. The TTF system studied was determined to be a one-electron transfer system, although potentially exhibiting three well-defined oxidation states. Despite the slightly positive redox potential of TTF, electrolytes with TTF displayed around 200 mV lower open-circuit voltage than the iodide/triiodide system. This can mainly be ascribed to a much shorter electron lifetime in the TiO2 film. Mass transport limitations for redox species in TTF-based electrolytes were found to be serious. Electrochemical impedance measurements (EIS) show that the charge-transfer resistance at the counter electrode in the electrolyte with TTF is considerably larger than for the iodide/triiodide system. In addition, the light absorption of the TTF-based electrolyte is stronger than that for the iodide/triiodide system. Thus, DSCs with TTF-based electrolytes show worse photovoltaic performance than those with iodide/triiodide-based electrolytes. The differences in I–V characteristics and charge-recombination behavior have also been elucidated.

Dipicolinic acid: a strong anchoring group with tunable redox and spectral behavior for stable dye-sensitized solar cells

Dipicolinic acid was investigated as a new anchoring group for DSSCs. A pilot dye (PD2) bearing this new anchoring group was found to adsorb significantly stronger to TiO2 than its cyanoacrylic acid analogue. The electrolyte composition was found to have a strong effect on the photoelectrochemical properties of the adsorbed dye in the device, allowing the dye LUMO energy to be tuned by 0.5 eV. Using a pyridine-free electrolyte, panchromatic absorption of the dye on TiO2 extending to 900 nm has been achieved. Solar cells using PD2 and a Co(bpy)3 based electrolyte showed unique stability under simulated sunlight and elevated temperatures.

Peripheral Hole Acceptor Moieties on an Organic Dye Improve Dye-Sensitized Solar Cell Performance

Investigation of charge transfer dynamics in dye‐sensitized solar cells is of fundamental interest and the control of these dynamics is a key factor for developing more efficient solar cell devices. One possibility for attenuating losses through recombination between injected electrons and oxidized dye molecules is to move the positive charge further away from the metal oxide surface. For this purpose, a metal‐free dye named E6 is developed, in which the chromophore core is tethered to two external triphenylamine (TPA) units. After photoinduced electron injection into TiO2, the remaining hole is rapidly transferred to a peripheral TPA unit. Electron–hole recombination is slowed down by 30% compared to a reference dye without peripheral TPA units. Furthermore, it is found that the added TPA moieties improve the electron blocking effect of the dye, retarding recombination of electrons from TiO2 to the cobalt‐based electrolyte.

Experimental and Theoretical Investigation of the Function of 4-tert-Butyl Pyridine for Interface Energy Level Adjustment in Efficient Solid-State Dye-Sensitized Solar Cells

4- tert-Butylpyridine ( t-BP) is commonly used in solid state dye-sensitized solar cells (ssDSSCs) to increase the photovoltaic performance. In this report, the mechanism how t-BP functions as a favorable additive is investigated comprehensively. ssDSSCs were prepared with different concentrations of t-BP, and a clear increase in efficiency was observed up to a maximum concentration and for higher concentrations the efficiency thereafter decreases. The energy level alignment in the complete devices was measured using hard X-ray photoelectron spectroscopy (HAXPES). The results show that the energy levels of titanium dioxide are shifted further away from the energy levels of spiro-OMeTAD as the t-BP concentration is increased. This explains the higher photovoltage obtained in the devices with higher t-BP concentration. In addition, the electron lifetime was measured for the devices and the electron lifetime was increased when adding t-BP, which can be explained by the recombination blocking effect at the surface of TiO2. The results from the HAXPES measurements agree with those obtained from density functional theory calculations and give an understanding of the mechanism for the improvement, which is an important step for the future development of solar cells including t-BP.