Esen Ozdogan

Application of carboxymethylcellulose hydrogel based silver nanocomposites on cotton fabrics for antibacterial property

In this study, fumaric acid (FA) crosslinked carboxymethylcellulose (CMC) hydrogel (CMCF) based silver nanocomposites were coated on cotton fabric for antibacterial property for the first time. The performance of the nanocomposite treated cotton fabric was tested for different mixing times of hydrogel solution, padding times and concentrations of silver. The cotton fabrics treated with CMC hydrogel based silver nanocomposites demonstrated 99.9% reduction for both Staphylococcus aureus (Sa) and Klebsiella pneumonia (Kp). After one cycle washing processes of treated cotton fabric, there is no significant variation observed in antibacterial activity. From SEM and AFM analyses, silver particles in nano-size, homogenously distributed, were observed. The treated samples were also evaluated by tensile strength, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) analysis, fluid absorbency properties, and whiteness index. The treatment of cotton fabric with CMCF hydrogel did not affect the whiteness considerably, but increased the absorbency values of cotton.

The effect of argon and air plasma treatment of flax fiber on mechanical properties of reinforced polyester composite

Flax fibers were modified by argon and air atmospheric pressure plasma treatments to improve the mechanical properties of flax fiber-reinforced unsaturated polyester composites. Plasma treatments were carried out at plasma powers of 100, 200, and 300 W. Both plasma surface treatments were conducted to improve the tensile strength, tensile modulus, flexural strength, flexural modulus, interlaminar shear strength (ILSS), Mode I interlaminar fracture toughness (GIC), and Mode II interlaminar fracture toughness (GIIC). Moreover, the maximum improvement in the mechanical properties was obtained after air plasma treatment of flax fiber at a plasma power of 300 W. Tensile strength, flexural strength, ILSS, GIC, and GIIC values of flax fiber-reinforced polyester composites increased by nearly 34%, 31%, 39%, 35%, and 42%, respectively. However, for argon plasma-treated flax fiber-reinforced polyester composites, the mechanical properties of composite increased up to argon plasma power of 200 W.

Evaluation of some of the physical properties of atmospheric plasma treated polypropylene fabric

In this study, atmospheric pressure plasma (APP) treatment was applied to polypropylene (PP) fabric with non‐polymerizing gases, such as air, argon, and nitrogen. Properties of the APP‐treated samples including low‐stress mechanical behavior, air permeability, water vapor permeability, and thermal characteristics were evaluated. Tensile and friction coefficient of the specimens were also measured. The changes in these properties are believed to be closely related to the inter‐fiber and inter‐yarn frictional force induced by the APP. The decrease in the air permeability of the APP‐treated PP fabric was probably because of the plasma action effect on change in fabric surface morphology, which was confirmed by scanning electron microscopy micrographs. The change in the thermal properties of the APP‐treated PP fabric was in good agreement with the earlier findings and can be attributed to the amount of air trapped between the yarns and fibers. This study suggests that the APP treatment can influence the final properties of the PP fabric, and also provides information for developing APP‐treated PP fabric for industrial use.

Investigating the Applicability of Metal Ion Implantation Technique (MEVVA) to Textile Surfaces

Polyethylene terephalate (PET) samples were modified by Cu, C, Ti, and Cr implantation using a metal vapor vacuum arc (MEVVA) implanter. The ions were implanted at an accelerating voltage of 30 kV with a dose ranging from 1 × 1014 to 1 × 1017 ions/cm2. In the first part of this study, Cu ions were implanted to improve the electrical properties of PET woven fabrics, and in the second part, C, Ti and Cr ions were implanted to enhance the mechanical properties of PET membrane fabrics. After implantation, the results showed that the half-charge decay time of implanted fabric lessened to milliseconds, and the friction coefficient and wear loss values decreased significantly. The surface morphologies of the samples were examined by scanning electron microscopy and atomic force microscopy. The changes in chemical structure were observed by IR spectra.

Valorisation of almond shell waste in ultrasonic biomordanted dyeing: alternatives to metallic mordants

An agroindustrial waste, outer green shell of almond fruit has been valorised as a novel natural dye using chemical solvent-free extraction, small amount of metallic mordants, one-bath biomordanted dyeing, ultrasonic medium, auxiliary-free dyeing and washing. The main objective of this study is to evaluate biomordants vs. metallic mordants depending on heating system both in extraction and dyeing and to reveal alternatives to metallic mordants. Effects of conventional- and ultrasound-assisted systems on dyeing and fastness properties were investigated. Wool fabrics dyed using metallic mordants (alum, iron II sulphate, copper II sulphate and potassium dichromate) were compared with the samples dyed in conjunction with biomordants [powder of valex (acorn of Quercus ithaburensis ssp. macrolepis), pomegranate (Punica granatum L.) rind, rosemary (Rosmarinus officinalis) and thuja (Thuja orientalis) leaves] in terms of colour yield, colour coordinates and fastness properties. Heating system had significant effects on dyeing and fastness results. Power ultrasound did not present any advantage in colour yield increment while it presented different effects on fastness values depending on mordant and process type of which ultrasound was applied. Some biomordants could be replaced with metallic mordants depending on their types and heating system. They could produce completely different colour gamuts just like metallic mordants.

Effect of Surrounded Air Atmospheric Plasma Treatment on Polypropylene Dyeability Using Cationic Dyestuffs

The dyeing properties of the polypropylene (PP) fabrics using cationic dyestuffs were investigated after surrounded air atmospheric cold-plasma treatment. Surrounded air plasma (SAP) was used to modify fabric surface and to optimize the effects of some discharge parameters on dyeability. Surface morphology and physical-chemical properties of plasma treated fibers were also characterized by Fourier transform infrared attenuated total reflection spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. Activated surfaces by SAP were grafted with different compounds: 6-aminohexanoic acid, acrylic acid, and hexamethyldisiloxane. Dyeing the plasma-induced grafted PP fabric with basic dye was quite satisfactory when high color strength and good fasteness were considered.

Surface modification of fibers and sizing operations

Abstract As the usage of composites increase, more and more interests over the fibers of the composites are aroused. Fibers have dominant roles over the properties of composites. The compatibility of fibers with the polymer matrices is another important issue. In todays technology possibilities, after the choice of the fiber type in a composite, there are many methods used for the surface modification of fibers to perform a proper composite material and increase the quality of the last product. In this chapter, physical, chemical, and biological methods used in the surface modification of fibers of the composites are discussed. The key points are arranged according to the fiber properties and the resulting composites strength and usefulness.