Esteban Martínez-García

Biotechnological domestication of pseudomonads using synthetic biology

Much of contemporary synthetic biology research relies on the use of bacterial chassis for plugging-in and plugging-out genetic circuits and new-to-nature functionalities. However, the microorganisms that are the easiest to manipulate in the laboratory are often suboptimal for downstream industrial applications, which can involve physicochemical stress and harsh operating conditions. In this Review, we advocate the use of environmental Pseudomonas strains as model organisms that are pre-endowed with the metabolic, physiological and stress-endurance traits that are demanded by current and future synthetic biology and biotechnological needs.

Engineering multiple genomic deletions in Gram-negative bacteria: analysis of the multi-resistant antibiotic profile of Pseudomonas putida KT2440.

The genome of the soil bacterium Pseudomonas putida strain KT2440 has been erased of various determinants of resistance to antibiotics encoded in its extant chromosome. To this end, we employed a coherent genetic platform that allowed the precise deletion of multiple genomic segments in a large variety of Gram-negative bacteria including (but not limited to) P. putida. The method is based on the obligatory recombination between free-ended homologous DNA sequences that are released as linear fragments generated upon the cleavage of the chromosome with unique I-SceI sites, added to the segment of interest by the vector system. Despite the potential for a SOS response brought about by the appearance of double stranded DNA breaks during the process, fluctuation experiments revealed that the procedure did not increase mutation rates - perhaps due to the protection exerted by I-SceI bound to the otherwise naked DNA termini. With this tool in hand we made sequential deletions of genes mexC, mexE, ttgA and ampC in the genome of the target bacterium, orthologues of which are known to determine various degrees of antibiotic resistance in diverse microorganisms. Inspection of the corresponding phenotypes demonstrated that the efflux pump encoded by ttgA sufficed to endow P. putida with a high-level of tolerance to β-lactams, chloramphenicol and quinolones, but had little effect on, e.g. aminoglycosides. Analysis of the mutants revealed also a considerable diversity in the manifestation of the resistance phenotype within the population and suggested a degree of synergism between different pumps. The directed edition of the P. putida chromosome shown here not only enhances the amenability of this bacterium to deep genomic engineering, but also validates the corresponding approach for similar handlings of a large variety of Gram-negative microorganisms.

pBAM1: an all-synthetic genetic tool for analysis and construction of complex bacterial phenotypes

BackgroundSince publication in 1977 of plasmid pBR322, many breakthroughs in Biology have depended on increasingly sophisticated vector platforms for analysis and engineering of given bacterial strains. Although restriction sites impose a certain format in the procedures for assembling cloned genes, every attempt thus far to standardize vector architecture and nomenclature has ended up in failure. While this state of affairs may still be tolerable for traditional one-at-a-time studies of single genes, the onset of systems and synthetic biology calls for a simplification -along with an optimization- of the currently unwieldy pool of genetic tools.ResultsThe functional DNA sequences present in the natural bacterial transposon Tn5 have been methodically edited and refactored for the production of a multi-purpose genetic tool named pBAM1, which allows a range of manipulations in the genome of Gram-negative bacteria. This all-synthetic construct enhances the power of mini-transposon vectors for either de-construction or re-construction of phenotypes á la carte by incorporating features inspired in systems engineering: modularity, re-usability, minimization, and compatibility with other genetic tools. pBAM1 bears an streamlined, restriction site-freed and narrow-host range replication frame bearing the sequences of R6K oriV, oriT and an ampicillin resistance marker. These go along with a business module that contains a host-independent and hyperactive transposition platform for in vivo or in vitro insertion of desired DNA into the genome of the target bacterium. All functional sequences were standardized for a straightforward replacement by equivalent counterparts, if required. pBAM1 can be delivered into recipient cells by either mating or electroporation, producing transposon insertion frequencies of 1.8 × 10-3 and 1.02 × 10-7, respectively in the soil bacterium Pseudomonas putida. Analyses of the resulting clones revealed a 100% of unique transposition events and virtually no-cointegration of the donor plasmid within the target genome.ConclusionsThis work reports the design and performance of an all-synthetic mini-transposon vector. The power of the new system for both identification of new functions or for the construction of desired phenotypes is shown in a genetic survey of hyper-expressed proteins and regulatory elements that influence the expression of the σ54-dependent Pu promoter of P. putida.

SEVA 2.0: an update of the Standard European Vector Architecture for de-/re-construction of bacterial functionalities

The Standard European Vector Architecture 2.0 database (SEVA-DB 2.0, http://seva.cnb.csic.es) is an improved and expanded version of the platform released in 2013 (doi: 10.1093/nar/gks1119) aimed at assisting the choice of optimal genetic tools for de-constructing and re-constructing complex prokaryotic phenotypes. By adopting simple compositional rules, the SEVA standard facilitates combinations of functional DNA segments that ease both the analysis and the engineering of diverse Gram-negative bacteria for fundamental or biotechnological purposes. The large number of users of the SEVA-DB during its first two years of existence has resulted in a valuable feedback that we have exploited for fixing DNA sequence errors, improving the nomenclature of the SEVA plasmids, expanding the vector collection, adding new features to the web interface and encouraging contributions of materials from the community of users. The SEVA platform is also adopting the Synthetic Biology Open Language (SBOL) for electronic-like description of the constructs available in the collection and their interfacing with genetic devices developed by other Synthetic Biology communities. We advocate the SEVA format as one interim asset for the ongoing transition of genetic design of microorganisms from being a trial-and-error endeavor to become an authentic engineering discipline.

Pseudomonas 2.0: genetic upgrading of P. putida KT2440 as an enhanced host for heterologous gene expression

BackgroundBecause of its adaptability to sites polluted with toxic chemicals, the model soil bacterium Pseudomonas putida is naturally endowed with a number of metabolic and stress-endurance qualities which have considerable value for hosting energy-demanding and redox reactions thereof. The growing body of knowledge on P. putida strain KT2440 has been exploited for the rational design of a derivative strain in which the genome has been heavily edited in order to construct a robust microbial cell factory.ResultsEleven non-adjacent genomic deletions, which span 300 genes (i.e., 4.3% of the entire P. putida KT2440 genome), were eliminated; thereby enhancing desirable traits and eliminating attributes which are detrimental in an expression host. Since ATP and NAD(P)H availability – as well as genetic instability, are generally considered to be major bottlenecks for the performance of platform strains, a suite of functions that drain high-energy phosphate from the cells and/or consume NAD(P)H were targeted in particular, the whole flagellar machinery. Four prophages, two transposons, and three components of DNA restriction-modification systems were eliminated as well. The resulting strain (P. putida EM383) displayed growth properties (i.e., lag times, biomass yield, and specific growth rates) clearly superior to the precursor wild-type strain KT2440. Furthermore, it tolerated endogenous oxidative stress, acquired and replicated exogenous DNA, and survived better in stationary phase. The performance of a bi-cistronic GFP-LuxCDABE reporter system as a proxy of combined metabolic vitality, revealed that the deletions in P. putida strain EM383 brought about an increase of >50% in the overall physiological vigour.ConclusionThe rationally modified P. putida strain allowed for the better functional expression of implanted genes by directly improving the metabolic currency that sustains the gene expression flow, instead of resorting to the classical genetic approaches (e.g., increasing the promoter strength in the DNA constructs of interest).

The metabolic cost of flagellar motion in Pseudomonas putida KT2440

Although the flagellar machinery of environmental bacteria endows cells with a phenomenal survival device, it also consumes much of the metabolic currency necessary for fuelling such a vigorous nano-motor. The physiological cost of flagella-related functions of the soil bacterium Pseudomonas putida KT2440 was examined and quantified through the deletion of a ≈ 70 kb DNA segment of the genome (≈ 1.1%), which includes relevant structural and regulatory genes in this micro-organism. The resulting strain lacked the protruding polar cords that define flagella in the wild-type P. putida strain and was unable of any swimming motility while showing a significant change in surface hydrophobicity. However, these deficiencies were otherwise concomitant with clear physiological advantages: rapid adaptation of the deleted strain to both glycolytic and gluconeogenic carbon sources, increased energy charge and, most remarkably, improved tolerance to oxidative stress, reflecting an increased NADPH/NADP(+) ratio. These qualities improve the endurance of non-flagellated cells to the metabolic fatigue associated with rapid growth in rich medium. Thus, flagellar motility represents the archetypal tradeoff involved in acquiring environmental advantages at the cost of a considerable metabolic burden.

Transposon-Based and Plasmid-Based Genetic Tools for Editing Genomes of Gram-Negative Bacteria

A good part of the contemporary synthetic biology agenda aims at reprogramming microorganisms to enhance existing functions and/or perform new tasks. Moreover, the functioning of complex regulatory networks, or even a single gene, is revealed only when perturbations are entered in the corresponding dynamic systems and the outcome monitored. These endeavors rely on the availability of genetic tools to successfully modify á la carte the chromosome of target bacteria. Key aspects to this end include the removal of undesired genomic segments, systems for the production of directed mutants and allelic replacements, random mutant libraries to discover new functions, and means to stably implant larger genetic networks into the genome of specific hosts. The list of gram-negative species that are appealing for such genetic refactoring operations is growingly expanding. However, the repertoire of available molecular techniques to do so is very limited beyond Escherichia coli. In this chapter, utilization of novel tools is described (exemplified in two plasmids systems: pBAM1 and pEMG) tailored for facilitating chromosomal engineering procedures in a wide variety of gram-negative microorganisms.

Engineering input/output nodes in prokaryotic regulatory circuits

A large number of prokaryotic regulatory elements have been interfaced artificially with biological circuits that execute specific expression programs. Engineering such circuits involves the association of input/output components that perform discrete signal-transfer steps in an autonomous fashion while connected to the rest of the network with a defined topology. Each of these nodes includes a signal-recognition component for the detection of the relevant physicochemical or biological stimulus, a molecular device able to translate the signal-sensing event into a defined output and a genetic module capable of understanding such an output as an input for the next component of the circuit. The final outcome of the process can be recorded by means of a reporter product. This review addresses three such aspects of forward engineering of signal-responding genetic parts. We first recap natural and non-natural regulatory assets for designing gene expression in response to predetermined signals - chemical or otherwise. These include transcriptional regulators developed by in vitro evolution (or designed from scratch), and synthetic riboswitches derived from in vitro selection of aptamers. Then we examine recent progress on reporter genes, whose expression allows the quantification and parametrization of signal-responding circuits in their entirety. Finally, we critically examine recent work on other reporters that confer bacteria with gross organoleptic properties (e.g. distinct odour) and the interfacing of signal-sensing devices with determinants of community behaviour.

New Transposon Tools Tailored for Metabolic Engineering of Gram-Negative Microbial Cell Factories

Re-programming microorganisms to modify their existing functions and/or to bestow bacteria with entirely new-to-Nature tasks have largely relied so far on specialized molecular biology tools. Such endeavors are not only relevant in the burgeoning metabolic engineering arena but also instrumental to explore the functioning of complex regulatory networks from a fundamental point of view. À la carte modification of bacterial genomes thus calls for novel tools to make genetic manipulations easier. We propose the use of a series of new broad-host-range mini-Tn5-vectors, termed pBAMDs, for the delivery of gene(s) into the chromosome of Gram-negative bacteria and for generating saturated mutagenesis libraries in gene function studies. These delivery vectors endow the user with the possibility of easy cloning and subsequent insertion of functional cargoes with three different antibiotic-resistance markers (kanamycin, streptomycin, and gentamicin). After validating the pBAMD vectors in the environmental bacterium Pseudomonas putida KT2440, their use was also illustrated by inserting the entire poly(3-hydroxybutyrate) (PHB) synthesis pathway from Cupriavidus necator in the chromosome of a phosphotransacetylase mutant of Escherichia coli. PHB is a completely biodegradable polyester with a number of industrial applications that make it attractive as a potential replacement of oil-based plastics. The non-selective nature of chromosomal insertions of the biosynthetic genes was evidenced by a large landscape of PHB synthesis levels in independent clones. One clone was selected and further characterized as a microbial cell factory for PHB accumulation, and it achieved polymer accumulation levels comparable to those of a plasmid-bearing recombinant. Taken together, our results demonstrate that the new mini-Tn5-vectors can be used to confer interesting phenotypes in Gram-negative bacteria that would be very difficult to engineer through direct manipulation of the structural genes.

Accumulation of inorganic polyphosphate enables stress endurance and catalytic vigour in Pseudomonas putida KT2440

BackgroundAccumulation of inorganic polyphosphate (polyP), a persistent trait throughout the whole Tree of Life, is claimed to play a fundamental role in enduring environmental insults in a large variety of microorganisms. The share of polyP in the tolerance of the soil bacterium Pseudomonas putida KT2440 to a suite of physicochemical stresses has been studied on the background of its capacity as a host of oxidative biotransformations.ResultsCells lacking polyphosphate kinase (Ppk), which expectedly presented a low intracellular polyP level, were more sensitive to a number of harsh external conditions such as ultraviolet irradiation, addition of β-lactam antibiotics and heavy metals (Cd2+ and Cu2+). Other phenotypes related to a high-energy phosphate load (e.g., swimming) were substantially weakened as well. Furthermore, the ppk mutant was consistently less tolerant to solvents and its survival in stationary phase was significantly affected. In contrast, the major metabolic routes were not significantly influenced by the loss of Ppk as diagnosed from respiration patterns of the mutant in phenotypic microarrays. However, the catalytic vigour of the mutant decreased to about 50% of that in the wild-type strain as estimated from the specific growth rate of cells carrying the catabolic TOL plasmid pWW0 for m- xylene biodegradation. The catalytic phenotype of the mutant was restored by over-expressing ppk in trans. Some of these deficits could be explained by the effect of the ppk mutation on the expression profile of the rpoS gene, the stationary phase sigma factor, which was revealed by the analysis of a PrpoS → rpoS‘-’lacZ translational fusion. Still, every stress-related effect of lacking Ppk in P. putida was relatively moderate as compared to some of the conspicuous phenotypes reported for other bacteria.ConclusionsWhile polyP can be involved in a myriad of cellular functions, the polymer seems to play a relatively secondary role in the genetic and biochemical networks that ultimately enable P. putida to endure environmental stresses. Instead, the main value of polyP could be ensuring a reservoire of energy during prolonged starvation. This is perhaps one of the reasons for polyP persistence in live systems despite its apparent lack of essentiality.