Estefanía Delgado-Pinar

Grafted squaramide monoamine nanoparticles as simple systems for sulfate recognition in pure water

New simple systems formed by a chain containing a squaramide function and a quaternised amine group attached to boehmite or silica-coated boehmite nanoparticles are able to discriminate anions in pure water.

Preparation of Hg2+ selective fluorescent chemosensors based on surface modified core–shell aluminosilicate nanoparticles

A synthetic procedure for the preparation of functional structured inorganic–organic hybrid materials consisting of boehmite-silica core–shell nanoparticles and anthracene-containing amines covalently attached to the nanoparticles surface is reported. The system functionalised with the monoamine chain shows a very high sensing performance for Hg2+ detection in pure water reaching a detection limit of 0.2 ppb. Two additional advantages of these systems are their stability over a wide pH window and the feasibility to be recovered by a simple procedure.

Naphthalene-containing polyamines supported in nanosized boehmite particles

Boehmite nanoparticles with covalently linked polyamine chains functionalized with naphthalene fluorophores have been prepared and characterized. The characterization of the materials by elemental microanalysis, X-ray powder diffraction, MAS 29Si NMR and electron microscopy unambiguously prove that the covalent anchorage had occurred. Steady-state fluorescence emission studies show that the luminescent properties of the modified nanoparticles are sensitive to changes in concentration of hydrogen ions, metal ions and anionic nucleotides such as ATP. The behaviour of the attached materials in aqueous solution is parallel to the behaviour of the single fluorophoric polyamines. Comparisons are established with analogous systems containing indole as a fluorophore.

Lanthanide complexes as imaging agents anchored on nano-sized particles of boehmite

The synthesis of boehmite nanoparticles modified with lanthanides (Eu, Tb and Gd) is described. Their synthesis, characterization and in vitro assays with HeLa cells were performed. The nuclear magnetic relaxation dispersion (NMRD) profiles of the two chelating moieties were studied. Imaging data from laser scanning confocal fluorescence microscopy and flow cytometry revealed that the nanoscaffolds were taken up by the cells, distributed throughout the cytoplasm and showed no toxicity. This platform could represent an alternative to silica-based inert matrices as imaging vehicles.

Microstructural evolution of mullites produced from single-phase gels

The crystalline microstructure of mullites obtained by heating monophasic gels has been investigated. Gels with alumina to silica molar ratio of 3:2 (as in secondary mullite) and 2:1 (as in primary mullite) were prepared by gelling mixtures of aluminium nitrate and tetraethylorthosilicate. Phase transformations were induced by heating the gel precursors, with different final treatment temperatures between 1173 and 1873 K. The mullites formed as a result of thermal treatment were studied by means of X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The crystalline structure (unit-cell parameters) and microstructure were determined from X-ray diffraction patterns. The formation of mullites of homogeneous chemical composition and with unit-cell parameters depending almost linearly on the treatment temperature was found. Their compositions, expressed as alumina to silica molar ratio, were determined from the unit-cell parameters and were in the range of those characterizing primary and secondary mullites. Mullites processed at lower temperatures were accompanied by small amounts of vitreous phase. The crystalline microstructure of the obtained mullites was interpreted by means of a mathematical model of polycrystalline material, involving prevalent crystallite shape, volume-weighted crystallite size distribution and second-order crystalline lattice strain distribution as model parameters. The model parameters were determined for each sample by modelling its X-ray diffraction pattern and fitting it to a measured pattern. Bimodality of the size distribution was observed and explained as a consequence of two crystallite nucleation and growth processes, which started from small alumina-rich and alumina-poor domains, spontaneously formed in a precursor gel at early stages of heating. Images produced by scanning and transmission electron microscopy agreed well with the characteristics obtained from the analysis of the X-ray diffraction patterns.

Spectroscopic and DFT Characterization of a Highly Reactive Nonheme FeV–Oxo Intermediate

The reaction of [(PyNMe3)FeII(CF3SO3)2], 1, with excess peracetic acid at -40 °C generates a highly reactive intermediate, 2b(PAA), that has the fastest rate to date for oxidizing cyclohexane by a nonheme iron species. It exhibits an intense 490 nm chromophore associated with an S = 1/2 EPR signal having g-values at 2.07, 2.01, and 1.94. This species was shown to be in a fast equilibrium with a second S = 1/2 species, 2a(PAA), assigned to a low-spin acylperoxoiron(III) center. Unfortunately, contaminants accompanying the 2(PAA) samples prevented determination of the iron oxidation state by Mössbauer spectroscopy. Use of MeO-PyNMe3 (an electron-enriched version of PyNMe3) and cyclohexyl peroxycarboxylic acid as oxidant affords intermediate 3b(CPCA) with a Mössbauer isomer shift δ = -0.08 mm/s that indicates an iron(V) oxidation state. Analysis of the Mössbauer and EPR spectra, combined with DFT studies, demonstrates that the electronic ground state of 3b(CPCA) is best described as a quantum mechanical mixture of [(MeO-PyNMe3)FeV(O)(OC(O)R)]2+ (∼75%) with some FeIV(O)(•OC(O)R) and FeIII(OOC(O)R) character. DFT studies of 3b(CPCA) reveal that the unbound oxygen of the carboxylate ligand, O2, is only 2.04 Å away from the oxo group, O1, corresponding to a Wiberg bond order for the O1-O2 bond of 0.35. This unusual geometry facilitates reversible O1-O2 bond formation and cleavage and accounts for the high reactivity of the intermediate when compared to the rates of hydrogen atom transfer and oxygen atom transfer reactions of FeIII(OC(O)R) ferric acyl peroxides and FeIV(O) complexes. The interaction of O2 with O1 leads to a significant downshift of the Fe-O1 Raman frequency (815 cm-1) relative to the 903 cm-1 value predicted for the hypothetical [(MeO-PyNMe3)FeV(O)(NCMe)]3+ complex.

One-pot preparation of surface modified boehmite nanoparticles with rare-earth cyclen complexes.

We report on the one-pot synthetic procedure of cyclen derivatives bearing three acetate groups attached on boehmite nanoparticles, the complexing capabilities of these inorganic-organic hybrid materials with rare earth cations, and the behaviour as contrast agents or fluorescence probes.

In silico discovery of substituted pyrido[2,3-d]pyrimidines and pentamidine-like compounds with biological activity in myotonic dystrophy models

Myotonic dystrophy type 1 (DM1) is a rare multisystemic disorder associated with an expansion of CUG repeats in mutant DMPK (dystrophia myotonica protein kinase) transcripts; the main effect of these expansions is the induction of pre-mRNA splicing defects by sequestering muscleblind-like family proteins (e.g. MBNL1). Disruption of the CUG repeats and the MBNL1 protein complex has been established as the best therapeutic approach for DM1, hence two main strategies have been proposed: targeted degradation of mutant DMPK transcripts and the development of CUG-binding molecules that prevent MBNL1 sequestration. Herein, suitable CUG-binding small molecules were selected using in silico approaches such as scaffold analysis, similarity searching, and druggability analysis. We used polarization assays to confirm the CUG repeat binding in vitro for a number of candidate compounds, and went on to evaluate the biological activity of the two with the strongest affinity for CUG repeats (which we refer to as compounds 1–2 and 2–5) in DM1 mutant cells and Drosophila DM1 models with an impaired locomotion phenotype. In particular, 1–2 and 2–5 enhanced the levels of free MBNL1 in patient-derived myoblasts in vitro and greatly improved DM1 fly locomotion in climbing assays. This work provides new computational approaches for rational large-scale virtual screens of molecules that selectively recognize CUG structures. Moreover, it contributes valuable knowledge regarding two compounds with desirable biological activity in DM1 models.

Effect of water/carboxymethylcellulose gel on the excimer formation of polyamine ligands functionalized with naphthalene.

Formation of intramolecular excimers was studied for the compounds 6,20-bis-naphthalene-2-ylmethyl-3,6,9,17,20,23,29,30-octaaza-tricyclo[23.3.1.1] triaconta-1(29),11,13,15(30),25,27-hexane (L1), a bis-naphthalene derivative, and N1-(2-{bis-[2-(3-amino-propylamino)-ethyl]-amino}-ethyl)-propane-1,3-diamine (L2), a tris-naphthalene derivative, incorporated in gels of carboxymethylcellulose sodium salt. Excimers are formed through dynamic processes as well as from ground state dimers. A mathematical treatment including preformed dimers was used to split the static and dynamic contributions in the excimer/monomer emission ratio. In the case of compound L1, the activation energy for excimer formation in water is 11 kJ mol(-1) and experimental evidence that the dynamic terms are identical in water and in the gel was achieved. On the other hand, ground state dimers are extremely favorable in the gel with an equilibrium constant of 8.2 at 25 degrees C. On the contrary, in the case of compound L2, the ground state dimers are observed in water but not in the gel. The results were interpreted as reflecting a balance between specific interactions (hydrogen bond) and confinement effects.

Molecular Switching, Logics, and Memories

The concepts of molecular switch, molecular logics and memories are intimately related. In this work a review of these three topics is given. While the main examples concern the field of inorganic chemistry, in a few cases organic systems are presented to better illustrate the concepts. The basic notions of the logics gates usually used by the nowadays computers is presented and the modus operandi to transpose these concepts to the molecular level is discussed. Examples of switches driven by external stimuli such as light-induced, metal-ion, redox, photobistable, and complexation–decomplexation are described in this chapter. The extension of switches working in solution to solid devices are shown in this chapter. The alternative to the current based switches, the quantum-dot cellular automata, based on switches changing by quantum-mechanical tunneling and coulomb interactions is a new paradigm shown in this chapter. Memories in particular optical memories are reported in this chapter.