Manuel G. Basallote

Trapping a Highly Reactive Nonheme Iron Intermediate That Oxygenates Strong C-H Bonds with Stereoretention.

An unprecedentedly reactive iron species (2) has been generated by reaction of excess peracetic acid with a mononuclear iron complex [Fe(II)(CF3SO3)2(PyNMe3)] (1) at cryogenic temperatures, and characterized spectroscopically. Compound 2 is kinetically competent for breaking strong C-H bonds of alkanes (BDE ≈ 100 kcal·mol(-1)) through a hydrogen-atom transfer mechanism, and the transformations proceed with stereoretention and regioselectively, responding to bond strength, as well as to steric and polar effects. Bimolecular reaction rates are at least an order of magnitude faster than those of the most reactive synthetic high-valent nonheme oxoiron species described to date. EPR studies in tandem with kinetic analysis show that the 490 nm chromophore of 2 is associated with two S = 1/2 species in rapid equilibrium. The minor component 2a (∼5% iron) has g-values at 2.20, 2.19, and 1.99 characteristic of a low-spin iron(III) center, and it is assigned as [Fe(III)(OOAc)(PyNMe3)](2+), also by comparison with the EPR parameters of the structurally characterized hydroxamate analogue [Fe(III)(tBuCON(H)O)(PyNMe3)](2+) (4). The major component 2b (∼40% iron, g-values = 2.07, 2.01, 1.95) has unusual EPR parameters, and it is proposed to be [Fe(V)(O)(OAc)(PyNMe3)](2+), where the O-O bond in 2a has been broken. Consistent with this assignment, 2b undergoes exchange of its acetate ligand with CD3CO2D and very rapidly reacts with olefins to produce the corresponding cis-1,2-hydroxoacetate product. Therefore, this work constitutes the first example where a synthetic nonheme iron species responsible for stereospecific and site selective C-H hydroxylation is spectroscopically trapped, and its catalytic reactivity against C-H bonds can be directly interrogated by kinetic methods. The accumulated evidence indicates that 2 consists mainly of an extraordinarily reactive [Fe(V)(O)(OAc)(PyNMe3)](2+) (2b) species capable of hydroxylating unactivated alkyl C-H bonds with stereoretention in a rapid and site-selective manner, and that exists in fast equilibrium with its [Fe(III)(OOAc)(PyNMe3)](2+) precursor.

Chiral [Mo3S4H3(diphosphine)3]+ Hydrido Clusters and Study of the Effect of the Metal Atom on the Kinetics of the Acid-Assisted Substitution of the Coordinated Hydride: Mo vs W

The molybdenum(IV) cluster hydrides of formula [Mo(3)S(4)H(3)(diphosphine)(3)](+) with diphosphine = 1,2-(bis)dimethylphosphinoethane (dmpe) or (+)-1,2-bis-(2R,5R)-2,5-(dimethylphospholan-1-yl)ethane ((R,R)-Me-BPE) have been isolated in moderate to high yields by reacting their halide precursors with borohydride. Complex [Mo(3)S(4)H(3)((R,R)-Me-BPE)(3)](+) as well as its tungsten analogue are obtained in optically pure forms. Reaction of the incomplete cuboidal [M(3)S(4)H(3)((R,R)-Me-BPE)(3)](+) (M = Mo, W) complex with acids in CH(2)Cl(2) solution shows kinetic features similar to those observed for the related incomplete cuboidal [W(3)S(4)H(3)(dmpe)(3)](+) cluster. However, there is a decrease in the value of the rate constants that is explained as a result of the higher steric effect of the diphosphine. The rate constants for the reaction of both clusters [M(3)S(4)H(3)((R,R)-Me-BPE)(3)](+) (M = Mo, W) with HCl have similar values, thus indicating a negligible effect of the metal center on the kinetics of reaction of the hydrides coordinated to any of both transition metals.

Synthesis, Reactivity, and Kinetics of Substitution in W3PdSe4 Cuboidal Clusters. A Reexamination of the Kinetics of Substitution of the Related W3S4 Cluster with Thiocyanate

The reaction of Pd(dba)(2) (dba = dibenzylideneacetone) with [W(3)Se(4)(H(2)O)(9)](4+) in 2 M HCl gives the cuboidal cluster [W(3)(PdCl)Se(4)(H(2)O)(9)](3+), which undergoes edge-to-edge condensation and crystallizes from Hpts solutions as edge-linked double-cubane cluster [{W(3)PdSe(4)(H(2)O)(9)}(2)](pts)(8) x 18 H(2)O (pts(-) = p-toluenesulfonate). The substitution of Cl(-) by different ligands, including phenylsulfinate PhSO(2)(-), was explored. The phenylsulfinate complex was crystallized as a 2:1 adduct with cucurbit[6]uril (C(36)H(36)N(24)O(12)), [W(3)(Pd(PhSO(2))Se(4)(H(2)O)(8.58)Cl(0.42)](2)(C(36)H(36)N(24)O(12))Cl(5.16) x 16.83 H(2)O, and its structure was determined by X-ray diffraction. Solution studies indicate that the Pd atom is able to stabilize the pyramidal tautomer of hypophosphorous and phosphorous acid: HP(OH)(2) and P(OH)(3). Kinetic studies were carried out on the reactions with H(3)PO(2) and thiocyanate, which were found to proceed in two and three kinetically resolvable steps, respectively. The kinetic results are discussed in terms of the mechanistic proposals put forward in the literature for related complexes. To gain insight into the details of the substitution kinetics in these kinds of clusters, the reaction of the related [W(3)S(4)(H(2)O)(9)](4+) complex with NCS(-) has been reexamined, and the results obtained provide for the first time information about the rates of substitution of the whole set of nine-coordinated water molecules.

Hydrogen and copper ion induced molecular reorganizations in two new scorpiand-like ligands appended with pyridine rings.

The synthesis of two new ligands constituted of a tris(2-aminoethyl)amine moiety linked to the 2,6 positions of a pyridine spacer through methylene groups in which the hanging arm is further functionalized with a 2-pycolyl (L1) or 3-pycolyl (L2) group is presented. The protonation of L1 and L2 and formation of Cu(2+) complexes have been studied using potentiometric, NMR, X-ray, and kinetic experiments. The results provide new information about the relevance of molecular movements in the chemistry of this kind of so-called scorpiand ligand. The comparison between these two ligands that only differ in the position of the substituent at the arm reveals important differences in both thermodynamic and kinetic properties. The Cu(2+) complex with L1 is several orders of magnitude more stable than that with L2, surely because in the latter case the pyridine nitrogen at the pendant arm is unable to coordinate to the metal ion with the ligand acting as hexadentate, a possibility that occurs in the case of [CuL1](2+), as demonstrated by its crystal structure. Significant differences are also found between both ligands in the kinetic studies of complex formation and decomposition. For L1, those processes occur in a single kinetic step, whereas for L2 they occur with the formation of a detectable reaction intermediate whose structure corresponds to that resulting from the movement typical of scorpiands. Another interesting conclusion derived from kinetic studies on complex formation is that the reactive form of the ligand is H(3)L(3+) for L1 and H(2)L(2+) for L2. DFT calculations are also reported, and they allow a rationalization of the kinetic results relative to the reactive forms of the ligands in the process of complex formation. In addition, they provide a full picture of the mechanistic pathway leading to the formation of the first Cu-N bond, including outer-sphere complexation, water dissociation, and reorganization of the outer-sphere complex.

Exceedingly Fast Oxygen Atom Transfer to Olefins via a Catalytically Competent Nonheme Iron Species

The reaction of [Fe(CF3 SO3 )2 (PyNMe3 )] with excess peracetic acid at -40 °C leads to the accumulation of a metastable compound that exists as a pair of electromeric species, [Fe(III) (OOAc)(PyNMe3 )](2+) and [Fe(V) (O)(OAc)(PyNMe3 )](2+) , in fast equilibrium. Stopped-flow UV/Vis analysis confirmed that oxygen atom transfer (OAT) from these electromeric species to olefinic substrates is exceedingly fast, forming epoxides with stereoretention. The impact of the electronic and steric properties of the substrate on the reaction rate could be elucidated, and the relative reactivities determined for the catalytic oxidations could be reproduced by kinetic studies. The observed fast reaction rates and high selectivities demonstrate that this metastable compound is a truly competent OAT intermediate of relevance for nonheme iron catalyzed epoxidations.

Water-Soluble Mo3S4 Clusters Bearing Hydroxypropyl Diphosphine Ligands: Synthesis, Crystal Structure, Aqueous Speciation, and Kinetics of Substitution Reactions

The [Mo(3)S(4)Cl(3)(dhprpe)(3)](+) (1(+)) cluster cation has been prepared by reaction between Mo(3)S(4)Cl(4)(PPh(3))(3) (solvent)(2) and the water-soluble 1,2-bis(bis(hydroxypropyl)phosphino)ethane (dhprpe, L) ligand. The crystal structure of [1](2)[Mo(6)Cl(14)] has been determined by X-ray diffraction methods and shows the typical incomplete cuboidal structure with a capping and three bridging sulfides. The octahedral coordination around each metal center is completed with a chlorine and two phosphorus atoms of the diphosphine ligand. Depending on the pH, the hydroxo group of the functionalized diphosphine can substitute the chloride ligands and coordinate to the cluster core to give new clusters with tridentate deprotonated dhprpe ligands of formula [Mo(3)S(4)(dhprpe-H)(3)](+) (2(+)). A detailed study based on stopped-flow, (31)P{(1)H} NMR, and electrospray ionization mass spectrometry techniques has been carried out to understand the behavior of acid-base equilibria and the kinetics of interconversion between the 1(+) and the 2(+) forms. Both conversion of 1(+) to 2(+) and its reverse process occur in a single kinetic step, so that reactions proceed at the three metal centers with statistically controlled kinetics. The values of the rate constants under different conditions are used to discuss on the mechanisms of opening and closing of the chelate rings with coordination or dissociation of chloride.

Synthesis and structure of the incomplete cuboidal clusters [W3Se4H3(dmpe)3]+, [W3Se4H3−x(OH)x(dmpe)3]+ and [W3Se4(OH)3(dmpe)3]+, and the mechanism of the acid-assisted substitution of the coordinated hydrides

The novel incomplete cuboidal cluster [W3Se4H3(dmpe)3](PF6), [1](PF6), has been prepared by reduction of [W3Se4Br3(dmpe)3](PF6) with LiBH4 in THF solution. The trihydroxo complex [W3Se4(OH)3(dmpe)3](PF6), [2](PF6), was obtained by reacting [W3Se4Br3(dmpe)3](PF6) with NaOH in MeCN-H2O solution. The complexes [1](PF6) and [2](PF6) were converted to their BPh4- salts by treatment with NaBPh4. Recrystallisation of [1](BPh4) in the presence of traces of water affords the mixed dihydride hydroxo complex [W3Se4H2(OH)(dmpe)3](BPh4). The crystal structures of [1](BPh4), [2](BPh4) and [W3Se4H2(OH)(dmpe)3](BPh4) have been resolved. Although the [1]+ trihydride does not react with an excess of halide salts, reaction with HX leads to [W3Se4X3(dmpe)3]+ (X = Cl, Br). The kinetics of this reaction has been studied at 25 degrees C in MeCN-H2O solution (1:1, v/v) and found to occur with two consecutive kinetic steps. The first step is independent of the nature and concentration of the X(-) anion but shows a first order dependence on the concentration of acid (k1 = 12.0 mol(-1) dm(3) s(-1)), whereas the second one is independent of the nature and concentration of both the acid and added salts (k2 = 0.024 s(-1)). In contrast, the reaction of [2]+ with acids occurs in a single step with kobs = 0.63 s(-1)(HCl) and 0.17 s(-1)(HBr). These kinetic results are discussed on the basis of the mechanism previously proposed for the reactions of the analogous [W3S4H3(dmpe)3]+ cluster, with special emphasis on the effects caused by the change of S by Se on the rate constants for the different processes involved.

Kinetics and mechanism of formation and decomposition of copper(II) complexes with a binucleating hexaazamacrocycle

Abstract -The kinetics of formation and decomposition of mono- and binuclear copper(II) complexes of the macrocycle 3,6,9,17,20,23-hexaazatricyclo[23.3.1.111,15]triaconta-1(29), 11(30),12,14,25(26),27-hexaene (L) has been studied at 25°C and 1.0 M ionic strength under a variety of conditions. All reactions occur in the stopped-flow time-scale and results indicate that upon addition of a large excess of H+ binuclear complexes convert rapidly into mononuclear species in which some nitrogens of the ligand are uncoordinated. The kinetics of decomposition of the resulting mononuclear species is intermediate between that of complexes with linear polyamines and those with mononucleating macrocycles. On the other hand, the formation of CuII complexes at high concentrations of OH- occurs essentially through reaction of Cu(OH)3- with the unprotonated form of the ligand, at a rate similar to that observed for reactions with simpler ligands. Coordination of the second CuII is very rapid under these conditions.

A DFT and TD‐DFT Approach to the Understanding of Statistical Kinetics in Substitution Reactions of M3Q4 (M=Mo, W; Q=S, Se) Cuboidal Clusters

For many years it has been known that the nine water molecules in [M(3)Q(4)(H(2)O)(9)](4+) cuboidal clusters (M = Mo, W; Q = S, Se) can be replaced by entering ligands, such as chloride or thiocyanate, and kinetic studies carried out mainly on the substitution of the first water molecule at each metal centre reveal that the reaction at the three metal centres occurs with statistical kinetics; that is, a single exponential with a rate constant corresponding to the reaction at the third centre is observed instead of the expected three-exponential kinetic trace. Such simplification of the kinetic equations requires the simultaneous fulfilment of two conditions: first that the three consecutive rate constants are in statistical ratio, and second that the metal centres behave as independent chromophores. The validity of those simplifications has been checked for the case of the reaction of [Mo(3)S(4)(H(2)O)(9)](4+) with Cl(-) by using DFT and TD-DFT theoretical calculations. The results of those calculations are in agreement with the available experimental information, which indicates that the H(2)O ligands trans to the μ-S undergo substitution much faster than those trans to the μ(3)-S. Moreover, the energy barriers for the substitution of the first water molecule at the three metal centres are close to each other, the differences being compatible with the small changes in the numerical values of the rate constants required for observation of statistical kinetics. TD-DFT calculations lead to calculated electronic spectra, which are in reasonable agreement with those experimentally measured, but the calculations do not indicate that the three metal centres behave as independent chromophores, although the mathematical conditions required for simplification of the kinetic traces to a single exponential are reasonably well fulfilled at certain wavelengths. A re-examination of the kinetics of the reaction by using global fitting procedures yields results, which are compatible with statistical kinetics, although an alternative interpretation in which substitution only occurs at a single metal centre under reversible conditions is also possible.

Stability and kinetics of decomposition of binuclear Cu(II) complexes with a symmetrical hexaaza macrocycle: the effect of SCN− as ancillary ligand

Abstract The effect of added KBr and KSCN on the stability constants of the mono and binuclear Cu(II) complexes with a symmetrical hexaazamacrocycle L has been examined in 0.1 M KNO 3 . The presence of these salts does not cause any change in the ligand protonation constants, which indicates that, in the presence of 0.1 M KNO 3 , there is not preferential interaction of the Br − and SCN − anions with the highly protonated forms of the ligand. No ternary CuLBr complexes are detected in the potentiometric study of the equilibrium, but several mono and binuclear CuLSCN complexes are formed at significant amounts and their stabilities are reported. The kinetics of decomposition of the binuclear CuL and CuLSCN complexes upon addition of an excess of acid has been also measured. The results obtained for the CuL complexes agree well with those previously reported in 1.0 M KNO 3 , and they indicate that the release of both Cu(II) ions is statistically controlled. The existence of some differences between the kinetic data corresponding to decomposition of solutions at different starting pH is interpreted in terms of parallel decomposition of the binuclear Cu 2 L 4+ , Cu 2 L(OH) 3+ and Cu 2 L(OH) 2 2+ complexes, the kinetic parameters for the three complexes being slightly different. This interpretation is also supported by the kinetics of decomposition of the CuLSCN − complexes that also reveals differences between the several complexes in solution. If the present data are interpreted in terms of the classical mechanism for decomposition of Cu(II)-polyamine complexes, they suggest that the nature of the ancillary ligands does not cause large changes in the lability of the CuN bonds but it largely affects to the relative rates of attack by H + and water.