Eun Gyo Jeong

Chitin Nanofiber Transparent Paper for Flexible Green Electronics

A transparent paper made of chitin nanofibers (ChNF) is introduced and its utilization as a substrate for flexible organic light-emitting diodes is demonstrated. Given its promising macroscopic properties, biofriendly characteristics, and availability of the raw material, the utilization of the ChNF transparent paper as a structural platform for flexible green electronics is envisaged.

Reliable thin-film encapsulation of flexible OLEDs and enhancing their bending characteristics through mechanical analysis

Thin film encapsulation of flexible organic light-emitting diodes (FOLEDs) with a moisture barrier, incorporating a silica nanoparticle-embedded sol–gel organic–inorganic hybrid nanocomposite (S–H nanocomposite) and Al2O3 were demonstrated, and their reliability and mechanical characteristics were assessed. The bending stress of the multi-layer structure for both the case of moisture barriers and encapsulated FOLEDs was investigated based on nonlinear finite-element analysis (FEA). To minimize the bending stress at the desired region, the neutral axis (NA) position could be strategically adjusted by the introduction of a buffer layer of UV-curable cycloaliphatic epoxy hybrid materials (hybrimer), synthesized via a sol–gel reaction. The optimized multi-layer structure, proposed as a result of FEA was validated by related experiments. Regarding the bending characteristics of the moisture barrier structure, the water vapor transmission rate (WVTR) of the hybrimer-coated moisture barrier was much lower than that of a non-coated sample, as a result of calcium corrosion tests after bending. The structure of encapsulated FOLEDs, which are coated by the hybrimer achieved an almost identical performance to that of non-bending samples in spite of 30 days exposure to 30 °C and 90% R.H. after a bending test with a radius of 1 cm. During this period, the occurrence of dark spots caused by moisture penetration was effectively suppressed. Collectively, these results suggest that the bending characteristics of hybrimer-coated multi-layer structures are remarkably improved with the theoretical prediction of the NA position.

Highly Conductive Transparent and Flexible Electrodes Including Double-Stacked Thin Metal Films for Transparent Flexible Electronics

To keep pace with the era of transparent and deformable electronics, electrode functions should be improved. In this paper, an innovative structure is suggested to overcome the trade-off between optical and electrical properties that commonly arises with transparent electrodes. The structure of double-stacked metal films showed high conductivity (<3 Ω/sq) and high transparency (∼90%) simultaneously. A proper space between two metal films led to high transmittance by an optical phenomenon. The principle of parallel connection allowed the electrode to have high conductivity. In situ fabrication was possible because the only materials composing the electrode were silver and WO3, which can be deposited by thermal evaporation. The electrode was flexible enough to withstand 10 000 bending cycles with a 1 mm bending radius. Furthermore, a few μm scale patterning of the electrode was easily implemented by using photolithography, which is widely employed industrially for patterning. Flexible organic light-emitting diodes and a transparent flexible thin-film transistor were successfully fabricated with the proposed electrode. Various practical applications of this electrode to new transparent flexible electronics are expected.

Weavable and Highly Efficient Organic Light-Emitting Fibers for Wearable Electronics: A Scalable, Low-Temperature Process

Fiber-based wearable displays, one of the most desirable requisites of electronic textiles (e-textiles), have emerged as a technology for their capability to revolutionize textile and fashion industries in collaboration with the state-of-the-art electronics. Nonetheless, challenges remain for the fibertronic approaches, because fiber-based light-emitting devices suffer from much lower performance than those fabricated on planar substrates. Here, we report weavable and highly efficient fiber-based organic light-emitting diodes (fiber OLEDs) based on a simple, cost-effective and low-temperature solution process. The values obtained for the fiber OLEDs, including efficiency and lifetime, are similar to that of conventional glass-based counterparts, which means that these state-of-the-art, highly efficient solution processed planar OLEDs can be applied to cylindrical shaped fibers without a reduction in performance. The fiber OLEDs withstand tensile strain up to 4.3% at a radius of 3.5 mm and are verified to be weavable into textiles and knitted clothes by hand-weaving demonstrations. Furthermore, to ensure the scalability of the proposed scheme fiber OLEDs with several diameters of 300, 220, 120, and 90 μm, thinner than a human hair, are demonstrated successfully. We believe that this approach, suitable for cost-effective reel-to-reel production, can realize low-cost commercially feasible fiber-based wearable displays in the future.