Eva Domínguez

Pollen sporopollenin: degradation and structural elucidation

Abstract We report the isolation of purified sporopollenin from pollen grains of different species and its complete solubilization. Exine from Pinus pinaster, Betula alba, Ambrosia elatior and Capsicum annuum was extracted by treatment with hydrogen fluoride in pyridine. These exines were purified from their aromatic moieties and from fatty acids linked by ester bonds using acidolysis and saponification treatments. The biopolymer obtained retains almost completely the shape of the original pollen grain. Fourier-transform infrared spectroscopy analysis of the isolated sporopollenin showed the absence of polysaccharide and phenolic material and the presence of carboxylic acid groups joined to unsaturations and ether linkages. Sporopollenin samples were successfully degraded by exhaustive 24-h ozonolysis at room temperature. Gentle ozonolysis (3 h at 0°C) did not completely degrade the biopolymer. The compounds obtained after exhaustive ozonolysis were analysed by gas chromatography-mass spectrometry. Dicarboxylic acids with a low number of carbon atoms were identified as major components of sporopollenin from P. pinaster, A. elatior and C. annuum, representing 28.8%, 63.2% and 88.5%, respectively, of the total compounds obtained. Fatty acids and n-alkanes also were identified in P. pinaster, A. elatior and B. alba sporopollenin. From the data obtained, an hypothesis about the chemical nature and structural arrangement of the sporopollenin is proposed.

An overview on plant cuticle biomechanics

Plant biomechanics combines the principles of physics, chemistry and engineering to answer questions about plant growth, development and interaction with the environment. The epidermal-growth-control theory, postulated in 1867 and verified in 2007, states that epidermal cells determine the rate of organ elongation since they are under tension, while inner tissues are under compression. The lipid cuticle layer is deposited on the surface of outer epidermal cell walls and modifies the chemical and mechanical nature of these cell walls. Thus, the plant cuticle plays a key role in plant interaction with the environment and in controlling organ expansion. Rheological analyses indicate that the cuticle is a mostly viscoelastic and strain-hardening material that stiffens the comparatively more elastic epidermal cell walls. Cuticle stiffness can be attributed to polysaccharides and flavonoids present in the cuticle whereas a cutin matrix is mainly responsible for its extensibility. Environmental conditions such as temperature and relative humidity have a plasticizing effect on the mechanical properties of cuticle since they lower cuticle stiffness and strength. The external appearance of agricultural commodities, especially fruits, is of great economic value. Mechanical properties of the cuticle can have a positive or negative effect on disorders like fruit cracking, fungal pathogen penetration and pest infestation. Cuticle rheology has significant variability within a species and thus can be subjected to selection in order to breed cultivars resistant to pests, infestation and disorders.

Characterization and biosynthesis of non-degradable polymers in plant cuticles

Abstract. The structure and monomeric composition of the highly aliphatic and non-saponifiable fraction of cutans isolated from the leaf cuticles of Agave americana L. and Clivia miniata Reg. have been elucidated. Spectroscopic Fourier transform infrared and 13C-nuclear magnetic resonance, calorimetric and X-ray diffraction studies, together with biopolymer analysis after exhaustive ozonolysis, showed that the cutan fraction consists of an amorphous three-dimensional network linked by ether bonds containing double bonds and free carboxylic acid functions. Data obtained from fatty acid sorption indicated that the new biopolymer investigated here has a highly hydrophobic character constituting an additional barrier biopolymer in those cuticles where it is present. Labelled [14C]linoleic acid was preferentially incorporated into the non-ester part of C. miniata leaf disks in comparison with the cutin fraction of the cuticular membrane. This indicates that the cis-pentadiene system of polyunsaturated fatty acids is involved in the formation of intramolecular linkages, mainly ether bonds, of the aliphatic biopolymer.

Infrared and Raman spectroscopic features of plant cuticles: a review

The cuticle is one of the most important plant barriers. It is an external and continuous lipid membrane that covers the surface of epidermal cells and whose main function is to prevent the massive loss of water. The spectroscopic characterization of the plant cuticle and its components (cutin, cutan, waxes, polysaccharides and phenolics) by infrared and Raman spectroscopies has provided significant advances in the knowledge of the functional groups present in the cuticular matrix and on their structural role, interaction and macromolecular arrangement. Additionally, these spectroscopies have been used in the study of cuticle interaction with exogenous molecules, degradation, distribution of components within the cuticle matrix, changes during growth and development and characterization of fossil plants.

New Insights into the Properties of Pubescent Surfaces: Peach Fruit as a Model

The surface of peach (Prunus persica ‘Calrico’) is covered by a dense indumentum, which may serve various protective purposes. With the aim of relating structure to function, the chemical composition, morphology, and hydrophobicity of the peach skin was assessed as a model for a pubescent plant surface. Distinct physicochemical features were observed for trichomes versus isolated cuticles. Peach cuticles were composed of 53% cutan, 27% waxes, 23% cutin, and 1% hydroxycinnamic acid derivatives (mainly ferulic and p-coumaric acids). Trichomes were covered by a thin cuticular layer containing 15% waxes and 19% cutin and were filled by polysaccharide material (63%) containing hydroxycinnamic acid derivatives and flavonoids. The surface free energy, polarity, and work of adhesion of intact and shaved peach surfaces were calculated from contact angle measurements of water, glycerol, and diiodomethane. The removal of the trichomes from the surface increased polarity from 3.8% (intact surface) to 23.6% and decreased the total surface free energy chiefly due to a decrease on its nonpolar component. The extraction of waxes and the removal of trichomes led to higher fruit dehydration rates. However, trichomes were found to have a higher water sorption capacity as compared with isolated cuticles. The results show that the peach surface is composed of two different materials that establish a polarity gradient: the trichome network, which has a higher surface free energy and a higher dispersive component, and the cuticle underneath, which has a lower surface free energy and higher surface polarity. The significance of the data concerning water-plant surface interactions is discussed within a physiological context.

Biomechanical properties of the tomato (Solanum lycopersicum) fruit cuticle during development are modulated by changes in the relative amounts of its components

In this study, growth-dependent changes in the mechanical properties of the tomato (Solanum lycopersicum) cuticle during fruit development were investigated in two cultivars with different patterns of cuticle growth and accumulation. The mechanical properties were determined in uniaxial tensile tests using strips of isolated cuticles. Changes in the functional groups of the cuticle chemical components were analysed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The early stages of fruit growth are characterized by an elastic cuticle, and viscoelastic behaviour only appeared at the beginning of cell enlargement. Changes in the cutin:polysaccharide ratio during development affected the strength required to achieve viscoelastic deformation. The increase in stiffness and decrease in extensibility during ripening, related to flavonoid accumulation, were accompanied by an increase in cutin depolymerization as a result of a reduction in the overall number of ester bonds. Quantitative changes in cuticle components influence the elastic/viscoelastic behaviour of the cuticle. The cutin:polysaccharide ratio modulates the stress required to permanently deform the cuticle and allow cell enlargement. Flavonoids stiffen the elastic phase and reduce permanent viscoelastic deformation. Ripening is accompanied by a chemical cleavage of cutin ester bonds. An infrared (IR) band related to phenolic accumulation can be used to monitor changes in the cutin esterification index.

Monitoring Biopolymers Present in Plant Cuticles by FT-IR Spectroscopy

Summary The usefulness of Fourier transform infrared (FTIR) spectroscopy for identifying functional groups ascribed to different biopolymers present in isolated plant cuticles is described and their relationships to the structure of the plant cuticle are discussed. For this purpose the isolated cuticle from Clivia miniata leaf has been investigated. The ability of the FTIR technique to follow the isolation of the main components of isolated plant cuticles is also discussed.

Plant cutin genesis: unanswered questions

The genesis of cutin, the main lipid polymer present in the biosphere, has remained elusive for many years. Recently, two main approaches have attempted to explain the process of cutin polymerization. One describes the existence of an acyltransferase cutin synthase enzyme that links activated monomers of cutin in the outer cell wall, while the other shows that plant cutin is the final result of an extracellular nonenzymatic self-assembly and polymerizing process of cutin monomers. In this opinion article, we explain both models and suggest that they could be pieces of a more complex biological scenario. We also highlight their different characteristics and current limitations, and suggest a potential synergism of both hypotheses.

Development of fruit cuticle in cherry tomato (Solanum lycopersicum)

The cuticle of a plant plays an important role in many physiological events of fruit development and ripening. Despite this, little is known about cuticle formation and development. We include a detailed morphological study at the microscopic level of cuticle during fruit growth and ripening using tomato as a fruit model. In addition, a study of the differences in cuticle thickness and composition during development is included. The four genotypes studied in this work showed a similar timing of the main morphological events: initiation of epidermal differentiation, changes in the distribution of the lipid, pectin and cellulose material within the cuticle, appearance of pegs, beginning of cuticle invaginations, maximum thickness and loss of polysaccharidic material. Fruit growth, measured by fruit diameter, showed a positive correlation with the increase of cuticle thickness and the amount of cuticle and their cutin and polysaccharide components per fruit unit during development. By contrast, cuticle waxes showed a different behaviour. Two important characteristics of cuticle growth were observed during tomato fruit development. First, the amount of cuticle per surface area reached its maximum in the first 15 days after anthesis and remained more or less constant until ripening. Second, there was a significant loss of polysaccharidic material from the beginning of ripening (breaker stage) to full red ripe.

Biomechanics of isolated tomato (Solanum lycopersicum) fruit cuticles during ripening: the role of flavonoids.

Flavonoids accumulate in tomato (Solanum lycopersicum L.) fruit cuticles during ripening. Their quantitative contribution to the biomechanical properties of the cuticle is studied in six tomato genotypes which show presence or absence of these compounds at the red ripe stage of fruit development. Tomato cuticles with flavonoids at red ripe showed a dramatic increase of these compounds between mature green and red ripe stages together with a significant increase in the elastic modulus. On the other hand, cuticles without flavonoids displayed a similar biomechanical behaviour at mature green and red ripe stages. The absence of flavonoids could also be related with a predominance of the viscoelastic performance of the cuticle. Thus, the increase of phenolics in tomato fruit cuticles during ripening is correlated with a more rigid cutin network that reinforces the mechanical function of polysaccharides which tend to diminish at this stage due to cell wall disassembly. A role of phenolics as biomechanical modulators of the cuticle behaviour is proposed.