Evren Homan Gökçe

Resveratrol-loaded solid lipid nanoparticles versus nanostructured lipid carriers: evaluation of antioxidant potential for dermal applications

Background Excessive generation of radical oxygen species (ROS) is a contributor to skin pathologies. Resveratrol (RSV) is a potent antioxidant. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) can ensure close contact and increase the amount of drug absorbed into the skin. In this study, RSV was loaded into SLN and NLC for dermal applications. Methods Nanoparticles were prepared by high shear homogenization using Compritol 888ATO, Myglyol, Poloxamer188, and Tween80. Particle size (PS), polydispersity index (PI), zeta potential (ZP), drug entrapment efficiency (EE), and production yield were determined. Differential scanning calorimetry (DSC) analysis and morphological transmission electron microscopy (TEM) examination were conducted. RSV concentration was optimized with cytotoxicity studies, and net intracellular accumulation of ROS was monitored with cytofluorimetry. The amount of RSV was determined from different layers of rat abdominal skin. Results PS of uniform RSV-SLN and RSV-NLC were determined as 287.2 nm ± 5.1 and 110.5 nm ± 1.3, respectively. ZP was −15.3 mV ± 0.4 and −13.8 mV ± 0.1 in the same order. The drug EE was 18% higher in NLC systems. TEM studies showed that the drug in the shell model was relevant for SLN, and that the melting point of the lipid in NLC was slightly lower. Concentrations below 50 μM were determined as suitable RSV concentrations for both SLN and NLC in cell culture studies. RSV-NLC showed less fluorescence, indicating less ROS production in cytofluorometric studies. Ex vivo skin studies revealed that NLC are more efficient in carrying RSV to the epidermis. Conclusion This study suggests that both of the lipid nanoparticles had antioxidant properties at a concentration of 50 μM. When the two systems were compared, NLC penetrated deeper into the skin. RSV-loaded NLC with smaller PS and higher drug loading appears to be superior to SLN for dermal applications.

Cyclosporine A loaded SLNs: evaluation of cellular uptake and corneal cytotoxicity.

Cyclosporine A (CsA) loaded solid lipid nanoparticles (SLNs) for topical ophthalmic applications were prepared by high shear homogenization and ultrasound method using Compritol 888 ATO, Poloxamer 188 and Tween 80, to investigate the cellular uptake of rabbit corneal epithelial cells (RCE) and to evaluate the cytotoxicity. The size of the optimized formulation was 225.9+/-5.5 nm with a polydispersity index of 0.253+/-0.05. The zeta potential and entrapment efficiency was detected as -16.9+/-0.7 mV and 95.6%, respectively. The CsA release was found to be enzyme (lipase/co-lipase complex) dependent. SLNs were sterilized at 110 and 121 degrees C. The cytotoxicity was evaluated in vitro by means of RCE cells and was higher at 121 degrees C sterilization temperature, probably due to a supposed leakage of Tween 80 following lipid re-crystallization. The permeation and penetration of CsA across/into the corneal cells were evaluated using in vitro and ex vivo experiments. The cellular uptake was investigated by replacing CsA with the fluorescent dye Rhodamine B. The penetration enhancement properties were supported by confocal laser scanning microscopy analysis. The internalization of SLNs in cornea and in RCE cell lines was confirmed, pointing out the possibility of CsA targeting to the cornea.

Cyclosporine A-Loaded Solid Lipid Nanoparticles: Ocular Tolerance and In Vivo Drug Release in Rabbit Eyes

Purpose: To determine the in vivo efficacy of cyclosporine A-loaded solid lipid nanoparticles (SLNs) in rabbit eyes. Methods: SLNs were prepared and administered to the cul-de-sac of rabbits, and the drug amount in aqueous humor was detected by high performance liquid chromatography (HPLC). The irritation was evaluated by modified Draize testing. Results: The particle size of SLNs was detected as 225.9 ± 5.5 nm with a negative surface charge. Aqueous humor drug levels reached 50.53 ng/mL, and there was no serious irritation in rabbit eyes. Conclusions: Topical ophthalmic efficacy of cyclosporine A was enhanced via administration of SLNs.

Chitosan-associated SLN: in vitro and ex vivo characterization of cyclosporine A loaded ophthalmic systems

The aim of this study was to develop cyclosporine A (CsA) loaded solid lipid nanoparticles (SLN) associated with chitosan (CS), to improve interaction and internalization in corneal cells. The SLN were prepared using high shear homogenization and ultrasound methods with CS in the aqueous phase. The lipid phase was based on Compritol or Precirol. The SLN were characterized for particle size, polydispersity index, morphology, zeta potential and encapsulation efficiency. The systems were freeze-dried to increase physical stability and trehalose was used as a cryo/lyo-protector to stabilize the SLN. The penetration and permeation properties of the SLN were assessed in vitro (cell culture) and ex vivo (excised pig cornea). The cell uptake of SLN was studied by means of confocal laser scanning microscopy. CS-associated SLN based on Compritol were biocompatible and enhanced the permeation/penetration of CsA along with a possible mechanism of internalization/uptake of the nanoparticles both in vitro and ex vivo.

Preparation and in vitro–in vivo evaluation of ofloxacin loaded ophthalmic nano structured lipid carriers modified with chitosan oligosaccharide lactate for the treatment of bacterial keratitis

The objective of this study was to explore the potential of the nanostructured lipid carriers (NLCs) modified with chitosan oligosaccharide lactate (COL) for topical ocular application. Ofloxacin (OFX) loaded NLCs were prepared by microemulsion or high shear homogenization methods. For combination of NLCs Compritol HD5 ATO was used as solid lipid, oleic acid as liquid lipid, Tween 80 as surfactant, ethanol as co-surfactant. The optimum NLCs was modified with 0.75% COL. The properties of NLCs in the absence or presence of OFX (0.3%) were characterized as zeta potential, particle size, viscosity and pH, TEM, drug loading, encapsulation efficiency and anti-microbial properties. Ex-vivo penetration/permeation studies were performed with rabbit cornea in Franz-diffusion cells. The penetration rate of OFX from NM-COL4OFX and NH-COL4OFX were significantly higher than commercial solution. Based on the selected formulations, in vivo tests were carried out by eye-drop instillation of NLCs in rabbit. The addition of COL improved the preocular residence time, controlled the drug release and enhanced the corneal bioavailability. In conclusion, OFX COL modified NLCs prepared by high shear homogenization method could be offered as a promising strategy for ocular drug delivery.

A comparative evaluation of coenzyme Q10-loaded liposomes and solid lipid nanoparticles as dermal antioxidant carriers

Background The effective delivery of coenzyme Q10 (Q10) to the skin has several benefits in therapy for different skin pathologies. However, the delivery of Q10 to deeper layers of skin is challenging due to low aqueous solubility of Q10. Liposomes and solid lipid nanoparticles (SLN) have many advantages to accomplish the requirements in topical drug delivery. This study aims to evaluate the influence of these nanosystems on the effective delivery of Q10 into the skin. Methods Q10-loaded liposomes (LIPO-Q10) and SLNs (SLN-Q10) were prepared by thin film hydration and high shear homogenization methods, respectively. Particle size (PS), polydispersity index (PI), zeta potential (ZP), and drug entrapment efficiency were determined. Differential scanning calorimetry analysis and morphological transmission electron microscopy (TEM) examination were conducted. Biocompatibility/cytotoxicity studies of Q10-loaded nanosystems were performed by means of cell culture (human fibroblasts) under oxidative conditions. The protective effect of formulations against production of reactive oxygen species were comparatively evaluated by cytofluorometry studies. Results PS of uniform SLN-Q10 and LIPO-Q10 were determined as 152.4 ± 7.9 nm and 301.1 ± 8.2 nm, respectively. ZPs were −13.67 ± 1.32 mV and −36.6 ± 0.85 mV in the same order. The drug entrapment efficiency was 15% higher in SLN systems. TEM studies confirmed the colloidal size. SLN-Q10 and LIPO-Q10 showed biocompatibility towards fibroblasts up to 50 μM of Q10, which was determined as suitable for cell proliferation. The mean fluorescence intensity % depending on ROS production determined in cytofluorometric studies could be listed as Q10 ≥ SLN-Q10 > LIPO-Q10. Conclusion The LIPO-Q10 system was able to enhance cell proliferation. On the contrary, SLN-Q10 did not show protective effects against ROS accumulation. As a conclusion, liposomes seem to have advantages over SLN in terms of effective delivery of Q10 to skin for antioxidant purposes.

A new approach to the treatment of recurrent aphthous stomatitis with bioadhesive gels containing cyclosporine A solid lipid nanoparticles: in vivo/in vitro examinations

Aim To develop a suitable buccal bioadhesive gel formulation containing cyclosporine A solid lipid nanoparticles (CsA SLNs) for the treatment of recurrent aphthous stomatitis. Methods The suitability of the prepared formulations for buccal application was assessed by means of rheological studies, textural profile analysis, and ex vivo drug-release studies. Plastic flows, typical gel-like spectra, and suitable mechanical properties were obtained from prepared formulations. The retention time was explored in in vivo distribution studies and the effect of the gel containing CsA SLNs on the healing of oral mucosal ulceration was investigated in an animal model. In vivo distribution studies are a very important indicator of the retention time of formulations at the application site. Results Distribution studies showed that 64.76% ± 8.35% of the formulation coded “F8+SLN” remained on the buccal mucosa 6 hours after application. For the second part of the in vivo experiments, 36 rabbits were separated into three groups: the first group was treated with the gel formulation without the active agent; the second group with the gel formulation containing CsA SLNs; and the third group, used as the control group, received no treatment. Wound healing was established by scoring of the rate of wound healing on Days 3, 6, 9, and 12. Histological observations were made on the same days as the scoring studies. The bioadhesive gel formulation that included CsA SLNs increased the rate of mucosal repair significantly. Conclusion This study has shown that the bioadhesive gel formulation containing CsA SLNs reported here is a promising candidate for the topical treatment of recurrent aphthous stomatitis.

Evaluation of characteristics and in vitro antioxidant properties of RSV loaded hyaluronic acid-DPPC microparticles as a wound healing system.

Resveratrol (RSV) was incorporated into microparticles by spray drying to treat chronic wounds such as diabetic ulcers. RSV was chosen due to its defense mechanisms as the formation of free radicals delays the healing process. RSV was loaded into microparticles consisting of dipalmitoylphosphatidylcholine (DPPC) and hyaluronic acid (HA), a polysaccharide naturally present within the skin, known to contribute to the healing process. Microparticles were evaluated in terms of production yield, size distribution, encapsulation efficiency, morphology, specific surface area, thermal properties and water content. Spherical and homogenous microparticles (span ≤ 2) in a size range between 20 and 30 μm were obtained with high encapsulation efficiency (≥ 97%). The effect of enzymes (hyaluronidase, phospholipase and lipase) on RSV release showed a dose-dependent pattern followed by a slow release stage. Cytotoxicity/proliferation and oxidative stress parameters (glutathione, oxidized glutathione, glutathione peroxidase, malondialdehyde, superoxide dismutase) obtained from human dermal fibroblast cell cultures revealed that formulations increased cell proliferation and the presence of RSV decreased oxidation in cells. RSV-loaded HA-DPPC microparticles appear as a promising formulation for wound healing due to synergistic effect of the ingredients.

Novel ofloxacin-loaded microemulsion formulations for ocular delivery.

PURPOSE The aim of this study was to prepare a novel oil-in-water microemulsion of ofloxacin (OFX) for topical ocular application. METHODS Pseudo-ternary phase diagrams were constructed for combination of oleic acid as oil phase, Tween 80 as surfactant, ethanol as co-surfactant, and 0.5 N NaOH solutions as aqueous phase. The optimum microemulsion was modified with 0.75% chitosan oligosaccharide lactate (COL). The properties of microemulsions in the absence or presence of OFX (0.3%) were measured, such as electrical conductivity, droplet size, viscosity, and pH. The in vitro release study was carried out using the dialysis bag method. Ex vivo permeability studies were performed with rabbit cornea in Franz-diffusion cells. Sterility, minimum inhibition concentration (MIC), and antibacterial activity studies were conducted microbiologically. The preocular residence time and efficacy against bacterial keratitis was compared with a commercial (C) solution via in vivo studies. RESULTS M2OFX modified with 0.75% COL showed slower release than M1OFX, which does not contain COL. The permeation rate of OFX from M1OFX was significantly higher than M2OFX and the C solution. The formulations were sterile and MIC values were the same for both. M2OFX, which contains 0.75% COL, performed higher antibacterial activity than M1OFX. The preocular residence time was improved by microemulsion in comparison to solution; the addition of COL did not make a significant difference. In total, 8 rabbits gave better results with M1OFX, whereas 4 gave similar scores to commercial solution-applied rabbits. CONCLUSION In conclusion, OFX microemulsions could be offered as a promising strategy for ocular drug delivery.

Development and evaluation of coenzyme Q10 loaded solid lipid nanoparticle hydrogel for enhanced dermal delivery

Abstract Coenzyme Q10 (Q10) loaded solid lipid nanoparticles (SLN) were prepared by the high speed homogenization method and incorporated into Carbopol 974P hydrogels. Compritol 888 ATO (C888) was employed as the lipid base; Poloxamer 188 (P188) and Tween 80 (Tw80) were used as surfactant and co-surfactant. Optimum particle size with narrow distribution was obtained as 152.2 nm for blank and 142.4 nm for Q10 loaded SLNs. The overall charge of loaded SLNs was -13.7 ± 1.3 mV. Q10 entrapment efficiency was 89 % and the production yield was 94 %. Transmission electron microscopy analysis provided evidence of colloidal size, spherical shape while differential scanning calorimetry analysis confirmed recrystallization of the lipid after the preparation of SLNs. Trolox equivalent antioxidant capacity (TEAC) analysis has shown that antioxidant potential of Q10 can be protected in SLNs. Rheological characteristics demonstrated that the SLN incorporating gels were shear thinning and the mechanical strength of the gels was suitable for topical application. Diffusion studies from rat abdominal skin revealed that the delivery of Q10 was doubled in SLN incorporating gels, approximately 40 μg cm-2, in comparison with gels prepared with only Q10 (not incorporated in SLNs). As a result, it can be stated that Q10-SLN loaded gels can be successful delivery systems for carrying Q10 efficiently into the skin without losing its antioxidant properties.