Evren Ok

Effect of the Size of the Apical Enlargement with Rotary Instruments, Single-cone Filling, Post Space Preparation with Drills, Fiber Post Removal, and Root Canal Filling Removal on Apical Crack Initiation and Propagation

INTRODUCTION The purpose of this study was to investigate the incidence of apical crack initiation and propagation in root dentin after several endodontic procedures. METHODS Sixty intact mandibular premolars were sectioned perpendicular to the long axis at 1 mm from the apex, and the apical surface was polished. Thirty teeth were left unprepared and served as a control, and the remaining 30 teeth were instrumented with ProTaper Universal instruments (Dentsply Maillefer, Ballaigues, Switzerland) up to size F5. The root canals were filled with the single-cone technique. Gutta-percha was removed with drills of the Rebilda post system (VOCO, Cuxhaven, Germany). Glass fiber-reinforced composite fiber posts were cemented using a dual-cure resin cement. The fiber posts were removed with a drill of the post system. Retreatment was completed after the removal of the gutta-percha. Crack initiation and propagation in the apical surfaces of the samples were examined with a stereomicroscope after each procedure. The absence/presence of cracks was recorded. Logistic regression was performed to analyze statistically the incidence of crack initiation and propagation with each procedure. RESULTS The initiation of the first crack and crack propagation was associated with F2 and F4 instruments, respectively. The logistic regression analysis revealed that instrumentation and F2 instrument significantly affected apical crack initiation (P < .001). Post space preparation had a significant effect on crack propagation (P = .0004). The other procedures had no significant effects on crack initiation and propagation (P > .05). CONCLUSIONS Rotary nickel-titanium instrumentation had a significant effect on apical crack initiation, and post space preparation with drills had a significant impact on crack propagation.

A cone-beam computed tomography study of root canal morphology of maxillary and mandibular premolars in a Turkish population

Abstract Aim. The aim of this study was to evaluate the root canal number and configuration of maxillary and mandibular premolar teeth by gender, intervals for decades, tooth position and unilateral or bilateral occurrence in a Turkish population using Cone Beam Computed Tomography(CBCT) scanning. Methodology. CBCT images of 5496 maxillary and mandibular premolars from 849 patients were evaluated. The following was evaluated in all the images: numbers of roots and root canals, the morphology of the root canal configuration according to the Vertucci classification, male–female differences in the tooth position and male–female differences in unilateral or bilateral occurrence. The reliability data were analyzed with a chi-square test. Results. The most prevalent root canal frequency was the two canals (86.2%) and type IV (76.9%) configuration for maxillary first premolar, one canal (59.7%) and type I (54.5%) canal configuration for second premolar. The incidence of one canal was higher in females and the occurrence of two or three canals was more common in males. The incidence of one canal was higher on the left side of maxillary premolars and the incidence of two canals was higher on the right side. Most mandibular first (93.5%) and second (98.5%) premolars had one canal. In general, females had one root canal of the mandibular premolar, whereas males had two or three canals. The type I configuration was most common and the incidence was higher on the right side. There were some differences found in the frequency distribution of the number of root canals and configuration of maxillary and mandibular premolar teeth according to intervals for decades. Conclusion. CBCT scanning provides comprehensive information about the root canal morphology of maxillary and mandibular premolar teeth. These data may help clinicians in root canal treatment of premolar teeth.

Efficacy of needle irrigation, EndoActivator, and photon-initiated photoacoustic streaming technique on removal of double and triple antibiotic pastes.

INTRODUCTION Photon-induced photoacoustic streaming (PIPS) is a novel technique used for the removal of material on root canal walls, such as bacteria and the smear layer. This study evaluated the efficacy of needle irrigation, the EndoActivator System (Dentsply Tulsa Dental Specialties, Tulsa, OK), and PIPS on the removal of antibiotic pastes from an artificial groove created in a root canal. METHODS Root canal preparation was performed up to size #40 on 84 extracted single-rooted teeth using ProTaper rotary instruments (Dentsply Maillefer, Ballaigues, Switzerland). The specimens were then split longitudinally, and 2 standardized grooves were prepared in the coronal and apical part of each segment. Double (DAP) and triple antibiotic pastes (TAP) were placed in the grooves for 4 weeks, and the root halves were reassembled. Needle irrigation, the EndoActivator System, and PIPS were used for the removal of DAP and TAP. The root segments were disassembled, and the amount of remaining antibiotic pastes was evaluated under a stereomicroscope at 20× magnification using a 4-grade scoring system. The data were evaluated statistically using Mann-Whitney U tests with a 95% confidence level (P = .05). RESULTS PIPS removed significantly more antibiotic pastes than the EndoActivator and needle irrigation (P < .001). The EndoActivator was superior to needle irrigation in removing antibiotic pastes (P < .001). There were no statistically significant differences between DAP and TAP and between coronal and apical thirds in their removing from artificially created grooves (P > .05). CONCLUSIONS PIPS was more effective in removing both DAP and TAP from artificial grooves in root canals than the EndoActivator System and needle irrigation. The EndoActivator was also more effective than needle irrigation. It is difficult to completely remove antibiotic pastes from root canals.

A cone-beam computed tomography study of the root canal morphology of anterior teeth in a Turkish population.

Objective: The aim of this study was to determine the root and canal morphology of the maxillary and mandibular anterior teeth in a Turkish population by analyzing cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 417 females and 410 males with a mean age of ranging from 14 to 70 years were examined in this study. A total of 1453 maxillary central incisors, 1504 maxillary lateral incisors, 1523 maxillary canines, 1582 mandibular central incisors, 1603 mandibular lateral incisors, and 1604 mandibular canines were analyzed. The number of root canals and the canal configurations were investigated and then were classified according to Vertucci′s classification. The data were analyzed with the Pearson Chi-square test. Results: The Type 1 canal configuration was most prevalent in the maxillary anterior teeth (96.8-99.7%). The Types 2, 3, 4, and 5 canal configurations were observed within the range of 0-1.3%, 0-0.8%, 0-0.7%, and 0-1.8%, respectively. In the mandibular anterior teeth, the Type 1 canal configuration was most prevalent (77-95%). The Types 2, 3, 4, and 5 canal configurations were observed within a range of 0.2-2.7%, 0.2-1.6%, 0.9-5.9%, and 1.8-14.4%, respectively. The prevalence of two canals was higher in males than in females both in the maxillary and mandibular anterior teeth (P < 0.05). Conclusions: Type 1 was the most prevalent canal configuration of maxillary and mandibular anterior teeth in the Turkish population. Type 5 was the most frequently observed canal configuration of the two canalled teeth. The incidence of root canal numbers and configurations differed with sex.

Evaluation of the root and canal morphology of mandibular permanent molars in a south-eastern Turkish population using cone-beam computed tomography

Objective: The aim of this retrospective study was to determine the root and canal morphology of the mandibular first and second permanent molars in a Turkish population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of mandibular first (n = 966) and second molar (n = 1165) teeth from 850 Turkish patients were evaluated. The root canal configurations were classified according to the method of Vertucci. The data were analyzed by Pearson′s Chi-square test. Results: The majority of mandibular molars were two rooted with three canals; however, three roots were identified in 0.05% of the first molars and 0.01% of the second molars, and 100% of the additional root canals were of type I configuration. Mesial roots had more complex canal systems with more than one canal, whereas most distal roots had a type I configuration. Conclusions: Within the limitations of this study, it can be concluded that CBCT scanning provides supplemental information about the root canal configurations of mandibular molars in a Turkish population. This study may help clinicians in the root canal treatment of mandibular molars.

Comparison of single cone obturation performance of different novel nickel-titanium rotary systems

Abstract Objectives. The purpose of this study was to compare several different single-cone obturations in the gutta-percha-filled areas (PGFA), sealer-filled areas (PSFA) and voids, also determining the volumetric characteristics of the tested cones. Materials and methods. Curved mesial roots of 120 mandibular molars were instrumented using several different systems (ProTaper Next, Twisted File Adaptive, OneShape, ProTaper Universal, WaveOne and Reciproc) and filled with corresponding single cones. The teeth were then sectioned horizontally at 2, 4, 6 and 8 mm from the apex. The area values of each section were calculated and converted to percentages (PGFA, PSFA and voids) of the total area. To determine volumetric characteristics of the tested cones, 20 gutta-percha points of each tested group were scanned with CBCT using the same parameters. Results. The ProTaper Next and WaveOne groups presented the most PGFA and least PSFA. The Twisted File Adaptive group presented the least PGFA and most PSFA (p < 0.05) and the least gutta-percha volume. Conclusions. The Twisted File Adaptive system matched cones had the least volume and the least PGFA in severely curved mesiobuccal canals of mandibular first molars. Single matched cones volume varied.

Effect of photo-activated disinfection on bond strength of three different root canal sealers

Introduction: The aim of this in vitro study was to evaluate the bond strength of Photo-Activated Disinfection (PAD) system to dentin with different root canal sealers by using a push-out test design. Materials and Methods: A total of 30 extracted mandibular premolar teeth with single and straight roots were used. The crowns were removed and the root canals were prepared by using ProTaper rotary files. The smear layer was removed and the roots were randomly divided into two groups (n = 15) according to the use of PAD system as the final disinfecting agent. Each group was then divided into 6 (n = 5) subgroups and obturated with gutta-percha and 3 different root canal sealers. The groups were Group 1: Sodium hypochlorite (NaOCl) + ethylenediaminetetraacetic acid (EDTA)-AH Plus sealer; Group 2: NaOCl + EDTA + PAD-AH Plus; Group 3: NaOCl + EDTA-Sealapex; Group 4: NaOCl + EDTA + PAD-Sealapex; Group 5: NaOCl + EDTA-mineral trioxide aggregate (MTA)-Fiallapex; and Group 6: NaOCl + EDTA + PAD-MTA-Fillapex. 1-mm thickness horizontal sections (n: 5 × 4 = 20) were sliced for the push-out bond strength measurement. Results: Group 3 and 4 showed significantly lower bond strengths compared with all the other groups (P < 0.05). No statistically significant difference was found among Groups 1, 2 and 5, but there was statistically significant difference between Group 5 and 6 (P < 0.05). Conclusion: This in vitro study indicated that the PAD system adversely affected the bond strength of the MTA Fillapex root canal sealer.

Comparison of cytotoxicity of various concentrations origanum extract solution with 2% chlorhexidine gluconate and 5.25% sodium hypochlorite

Objective: The purpose of this in vitro study was to compare the cytotoxicity of 0.5-4.5 origanum extract solution (OES), 2% chlorhexidine gluconate (CHX) and 5.25% sodium hypochlorite (NaOCl) with WST-1 test on human periodontal ligament (hPDL) fibroblasts. Materials and Methods: About 0.5-4.5% OES, 2% CHX and 5.25% NaOCl solutions cytotoxicity was evaluated with cell culture test using PDL fibroblasts. Viability of hPDL cells was evaluated with WST-1 (Cell Proliferation Reagent WST-1 Roche) test at 1, 24 and 72 nd h. hPDL cells were plated at 20 × 10 3 cells per well in 96-well plates. Absorbance values were read in optical density 480 nm by ELISA plate reader spectrophotometer. The statistical differences between various groups were evaluated using one-way ANOVA, post-hoc Duncan′s Multiple Range test using SAS software. Statistically, a significant difference was considered at P < 0.001. Results: According to the 1-h cytotoxicity results, 0.5% OES showed the least cytotoxic effect in test groups. There were not found any statistical significance between 1% OES and 2% CHX. About 5.25% NaOCl showed more cytotoxic effect than 1% OES and 2% CHX. In 24 and 72 h, different concentrations of OES, 5.25% NaOCl, 2% CHX solutions showed similar cytotoxic effect. Conclusions: Based on these results, 1% OES and 2% CHX showed similar results and less cytotoxic effect than 5.25% NaOCl. It could be considered as a favorable solution concentration when OES was used as root canal irrigation solution.

Effectiveness of different irrigation solutions on triple antibiotic paste removal from simulated immature root canal

To evaluate the effectiveness of different irrigation solutions and ultrasonic activation of irrigation solutions on removal of triple antibiotic paste (TAP) from root canals of the simulated immature teeth. Fifty single-rooted teeth were used. TAP was placed into each root canal, and specimens were stored in distilled water for 4 weeks at 37°C. After 4 weeks, the temporary coronal seal was removed and the samples were randomly divided into five groups as follows: (i) saline; (ii) ultrasonic activation of saline; (iii) NaOCl; (iv) ultrasonic activation of NaOCl; (v) chlorhexidine digluconate (CHX). The amount of remaining TAP on the canal walls was measured under stereomicroscope with 30× magnification. The data were analyzed using a one-way ANOVA and post-hoc Tukey test at a significance level of 0.05. There were statistically differences among CHX and ultrasonic activation of NaOCl and other groups (p < 0.05). There were no significant differences among the ultrasonic activation of saline, NaOCl, and saline groups (p > 0.05). Irrigation solutions and ultrasonic activation of the irrigation solutions could not completely remove the triple antibiotic paste from simulated immature root canals. Ultrasonic activation of the NaOCl gave the best and CHX was the worst results.

Fracture strength of roots instrumented with three different single file systems in curved root canals

Objective: The aim of this study was to compare the fracture strength of roots instrumented with three different single file rotary systems in curved mesial root canals of maxillary molars. Materials and Methods: Curvatures of 25°-35° on mesial roots of 60 maxillary molar teeth were sectioned below the cementoenamel junction to obtain roots 11 mm in length. The roots were balanced with respect to buccolingual and mesiodistal diameter and weight. They were distributed into three experimental groups and one control group (no instrumentation) (n = 15): Reciproc rotary file (R25, VDW, Munich, Germany), WaveOne Primary rotary file (Dentsply Tulsa Dental Specialties, Tulsa, UK) and OneShape (Micro-Mega, Besancon, France) rotary file. Vertical load was applied until fracture occurred. Data were statistically analyzed using one-way analysis of variance test (P < 0.05). Results: The mean fracture load was 412 ± 72 Newton (N) for the control group, 395 ± 69 N for the Reciproc group, 373 ± 63 N for the WaveOne group and 332 ± 68 N for the OneShape group. The fracture load differences among three experimental groups were not statistically significant (P > 0.05.) Whereas, the fracture loads of control and OneShape groups were significantly different (P = 0.012). Conclusions: Fracture resistance of the roots instrumented with WaveOne and Reciproc file systems were similar to the control group whereas it was observed that OneShape rotary file systems enhance the fracture strength of standardized curved roots when compared with the control group.