F. Tombolini

Comparative cyto-genotoxicity assessment of functionalized and pristine multiwalled carbon nanotubes on human lung epithelial cells.

Chemical functionalization extends CNT applications conferring them new functions, but could modify their toxicity. We compared cytotoxicity and genotoxic/oxidative effects of -OH functionalized and pristine MWCNTs to evaluated the influence of the functionalization exposing A549 cells to 1-40μg/ml of both MWCNTs for 2, 4 and 24h. Cytotoxicity was evaluated by MTT and LDH tests and apoptosis induction, direct/oxidative DNA damage by Fpg-modified comet assay. After 24h we found viability reduction significant at 20 and 40μg/ml for both the MWCNTs with a detectable viability reduction already at lower concentrations for MWCNTs. A significant LDH release was found only for MWCNTs. Significant apoptosis induction was found from 10μg/ml of MWCNT-OH. A concentration-dependent increase of direct DNA damage, significant at 40μg/ml of MWCNTs and beginning from 5μg/ml of MWCNT-OH was detected at all exposure times. Oxidative DNA damage was not observed for both CNTs. The results indicate a different cytotoxic mechanism, by membrane damage for MWCNTs and apoptosis for MWCNT-OH, that could be explained by a different cellular uptake. Moreover, we found an earlier genotoxic effect for MWCNT-OH. The findings suggest that further studies on functionalized CNTs are necessary before using them in several applications particularly in biomedical field.

Multi‐walled carbon nanotubes induce cytotoxicity and genotoxicity in human lung epithelial cells

The increasing use of nanomaterials in consumer products highlights the importance of understanding their potential toxic effects. We evaluated cytotoxic and genotoxic/oxidative effects induced by commercial multi‐walled carbon nanotubes (MWCNTs) on human lung epithelial (A549) cells treated with 5, 10, 40 and 100 µg ml−1 for different exposure times. Scanning electron microscopy (SEM) analysis, MTT [3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide] and lactate dehydrogenase (LDH) assays were performed to evaluate cytotoxicity. Fpg‐modified comet assay was used to evaluate direct‐oxidative DNA damage. LDH leakage was detected after 2, 4 and 24 h of exposure and viability reduction was revealed after 24 h. SEM analysis, performed after 4 and 24 h exposure, showed cell surface changes such as lower microvilli density, microvilli structure modifications and the presence of holes in plasma membrane. We found an induction of direct DNA damage after each exposure time and at all concentrations, statistically significant at 10 and 40 µg ml−1 after 2 h, at 5, 10, 100 µg ml−1 after 4 h and at 10 µg ml−1 after 24 h exposure. However, oxidative DNA damage was not found. The results showed an induction of early cytotoxic effects such as loss of membrane integrity, surface morphological changes and MWCNT agglomerate entrance at all concentrations. We also demonstrated the ability of MWCNTs to induce early genotoxicity. This study emphasizes the suitability of our approach to evaluating simultaneously the early response of the cell membrane and DNA to different MWCNT concentrations and exposure times in cells of target organ. The findings contribute to elucidation of the mechanism by which MWCNTs cause toxic effects in an in vitro experimental model. Copyright

Large photocurrent generation in multiwall carbon nanotubes

The authors demonstrate the ability of multiwall carbon nanotubes to generate photocurrents in the near ultraviolet and visible spectral ranges using electrochemical photocurrent measurements. The photogenerated current depends on the excitation wavelength similar to that for single wall carbon nanotubes. Its intensity and modulation can be related to the carbon nanotubes morphology. The maximum photon-to-current conversion efficiency is approximately 7%, about 50 times higher than that reported for single wall carbon nanotubes. This result is of particular relevance for photovoltaic nanodevices and solar energy conversion applications.

Study of cytotoxic and genotoxic effects of hydroxyl-functionalized multiwalled carbon nanotubes on human pulmonary cells

Chemical functionalization of multiwalled carbon nanotubes (MWCNTs) increases their solubility, dispersion, and biological applications. Since there are only a few studies on the toxicity of functionalized MWCNTs, we investigated the cytotoxic and genotoxic-oxidative effects of OH-functionalized MWCNTs on human lung epithelial cells (A549) in order to obtain information on their biological effects. We exposed the cells to 10, 20, 40, and 100 µg/mL of commercial MWCNT-OH for 24 h. Cytotoxicity was then evaluated as the reduction in cell viability, membrane damage, and apoptosis, assessed by MTT and LDH assays and fluorescence microscopic analysis, respectively. The Fpg-modified comet assay was used to assess direct/oxidative DNA damage. We found a concentration-dependent reduction in cell viability and an increase of percentage of apoptotic cells, with no significant cellular LDH release. There was also concentration-dependent direct DNA damage but no oxidative DNA damage. These findings demonstrate the cytotoxicity of MWCNT-OH, through reduction of cell viability and induction of apoptosis without cell membrane damage, and the genotoxicity, by direct DNA damage induction, suggesting that the MWCNTs enter the cell without damaging its membrane and directly interact with the nucleus. This preliminary study highlights the need for further research to examine the potential toxicity of functionalized MWCNTs before starting to use them in biological applications.

Influence of Cu nanoparticle size on the photo-electrochemical response from Cu?multiwall carbon nanotube composites

We show that Cu metal nanoparticle-multiwall carbon nanotube (MWCNT) assemblies can act as a new hybrid photoactive layer in photo-electrochemical devices. The carbon nanotube (CNT) composites were formed by a controlled thermal deposition of copper which produced crystalline metal nanoparticles localized on the carbon tube outer walls. The photoresponse evaluated in terms of IPCE (incident photon-to-charge carrier generation efficiency) varied for different sized-Cu-MWCNT samples across all the visible and near ultraviolet photon energy range with respect to the response of bare MWCNTs. In the case of 0.2 nm Cu nominal thickness, the IPCE increased, reaching 15%, a value 2.5 times higher than that measured for bare MWCNTs. As the Cu nominal coverage thickened, the IPCE started to decrease and become totally ineffective after 1 nm deposited Cu. The IPCE increase found was interpreted as being the result of a remarkable charge transfer between the Cu metal nanoparticles and the CNTs due to the formation of a strong ionic bond at their interface. The results obtained prove that the metal nanoparticle-CNT composites have optical, electrical and structural properties that can be applied in a variety of nanoscale architectures for novel photo-electrochemical devices.

Crystal undulator as a novel compact source of radiation

A crystalline undulator (CU) with periodically deformed crystallographic planes is capable of deflecting charged particles with the same strength as an equivalent magnetic field of 1000 T and could provide quite a short period L in the sub-millimeter range. We present an idea for creation of a CU and report its first realization. One face of a silicon crystal was given periodic micro-scratches (grooves), with a period of 1 mm, by means of a diamond blade. The X-ray tests of the crystal deformation have shown that a sinusoidal-like shape of crystalline planes goes through the bulk of the crystal. This opens up the possibility for experiments with high-energy particles channeled in CU, a novel compact source of radiation. The first experiment on photon emission in CU has been started at LNF with 800 MeV positrons aiming to produce 50 keV undulator photons.

Si nanotubes and nanospheres with two-dimensional polycrystalline walls

We report on the characteristics of a new class of Si-based nanotubes and spherical nanoparticles synthesized by the dc-arc plasma method in a mixture of argon and hydrogen. These two nanostructures share common properties: they are hollow and possess very thin, highly polycrystalline and mainly oxidized walls. In particular, we get several hints indicating that their walls could constitute only one single Si oxidized layer. Moreover, we find that only the less oxidized nanotubes exhibit locally atomic ordered, snakeskin-like areas which possess a hexagonal arrangement which can be interpreted either as an sp(2) or sp(3) hybridized Si or Si-H layer. Their ability to not react with oxygen seems to suggest the presence of sp(2) configuration or the formation of silicon-hydrogen bonding.

ACCELERATOR TESTS OF CRYSTAL UNDULATORS

A series of Silicon crystal undulator samples were produced based on the approach presented in PRL 90 (2003) 034801, with the periods of undulation from 0.1 mm to 1 mm, and the number of periods on the order of 10. The samples were characterized by X-rays, revealing the sine-like shape of the crystal lattice in the bulk. Next step in the characterization has been the channeling tests done with 70 GeV protons, where good channeling properties of the undulated Silicon lattice have been observed. The photon radiation tests of crystal undulators with high energy positrons are in progress on several locations: IHEP Protvino, LNF Frascati, and CERN SPS. The progress in the experimental activities and the predictions from detailed simulations are reported.

Composite materials based on carbon nanotubes for aerospace applications

Electrical and mechanical properties of composite materials based on Carbon Nanotubes are considered for aerospace applications. Nanostructured materials gained great importance in the past decade, owing to their wide ranging potential applications in many areas, e.g. mechanical, structural, sensor, biomedical, electronics. Of particular interest are carbon nanotubes, which can be used as a main constituent of composite materials with exceptional mechanical and electrical properties, very suitable for aerospace applications, also due to their light weight, mechanical strength and flexibility. We present results obtained recently in our laboratories concerning the electrical and mechanical properties (including resilience measurement, stress analysis, conductivity) of carbon nanotubes we synthesized by arc discharge and other techniques, embedded in a polymer matrix.

Workers’ Exposure to Nano-Objects with Different Dimensionalities in R&D Laboratories: Measurement Strategy and Field Studies

With the increasing interest in the potential benefits of nanotechnologies, concern is still growing that they may present emerging risks for workers. Various strategies have been developed to assess the exposure to nano-objects and their agglomerates and aggregates (NOAA) in the workplace, integrating different aerosol measurement instruments and taking into account multiple parameters that may influence NOAA toxicity. The present study proposes a multi-metric approach for measuring and sampling NOAA in the workplace, applied to three case studies in laboratories each dedicated to materials with different shapes and dimensionalities: graphene, nanowires, and nanoparticles. The study is part of a larger project with the aim of improving risk management tools in nanomaterials research laboratories. The harmonized methodology proposed by the Organization for Economic Cooperation and Development (OECD) has been applied, including information gathering about materials and processes, measurements with easy-to-use and hand-held real-time devices, air sampling with personal samplers, and off-line analysis using scanning electron microscopy. Significant values beyond which an emission can be attributed to the NOAA production process were identified by comparison of the particle number concentration (PNC) time series and the corresponding background levels in the three laboratories. We explored the relations between background PNC and microclimatic parameters. Morphological and elemental analysis of sampled filters was done to identify possible emission sources of NOAA during the production processes: rare particles, spherical, with average diameter similar to the produced NOAA were identified in the nanoparticles laboratory, so further investigation is recommended to confirm the potential for worker exposure. In conclusion, the information obtained should provide a valuable basis for improving risk management strategies in the laboratory at work.