Fabien Salaün

Preparation of microcapsules by complex coacervation of gum Arabic and chitosan

Gum Arabic-chitosan microcapsules containing a commercially available blend of triglycerides (Miglyol 812 N) as core phase were synthesized by complex coacervation. This study was conducted to clarify the influence of different parameters on the encapsulation process, i.e. during the emulsion formation steps and during the shell formation, using conductometry, zeta potential, surface and interface tension measurement and Fourier-transform infrared spectroscopy. By carefully analyzing the influencing factors including phase volume ratio, stirring rate and time, pH, reaction time, biopolymer ratio and crosslinking effect, the optimum synthetic conditions were found out. For the emulsion step, the optimum phase volume ratio chosen was 0.10 and an emulsion time of 15 min at 11,000 rpm was selected. The results also indicated that the optimum formation of these complexes appears at a pH value of 3.6 and a weight ratio of chitosan to gum Arabic mixtures of 0.25.

Evaluation of thermal and moisture management properties on knitted fabrics and comparison with a physiological model in warm conditions

This study reports on an experimental investigation of physical properties on the textile thermal comfort. Textile properties, such as thickness, relative porosity, air permeability, moisture regain, thermal conductivity, drying time and water-vapour transmission rate have been considered and correlated to the thermal and vapour resistance, permeability index, thermal effusivity and moisture management capability in order to determine the overall comfort performance of underwear fabrics. The results suggested that the fibre type, together with moisture regain and knitted structure characteristics appeared to affect some comfort-related properties of the fabrics. Additionally, thermal sensations, temperature and skin wetness predicted by Caseto® software for three distinct activity levels were investigated. Results show that the data obtained from this model in transient state are correlated to the thermal conductivity for the temperature and to Ret, moisture regain and drying time for the skin wetness. This provides potential information to determine the end uses of these fabrics according to the selected activity level.

Development of Phase Change Materials in Clothing Part I: Formulation of Microencapsulated Phase Change

Microcapsules containing phase change material for textile thermal insulation were synthesized and characterized. Prior to the encapsulation, the formation, the stability and phase change behavior of paraffin mixture were studied to define an optimum formulation with a wide temperature range. The addition of approximately 4 wt-% tetraethyl orthosilicate in n-hexadecane-n-eicosane mixture was found to improve latent heat of phase change. Microcapsules with approximately 70 wt-% paraffin in core material were investigated by using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, and scanning electron microscopy.

PLA with Intumescent System Containing Lignin and Ammonium Polyphosphate for Flame Retardant Textile

Using bio-based polymers to replace of polymers from petrochemicals in the manufacture of textile fibers is a possible way to improve sustainable development for the textile industry. Polylactic acid (PLA) is one of the available bio-based polymers. One way to improve the fire behavior of this bio-based polymer is to add an intumescent formulation mainly composed of acid and carbon sources. In order to optimize the amount of bio-based product in the final material composition, lignin from wood waste was selected as the carbon source. Different formulations of and/or ammonium polyphosphate (AP) were prepared by melt extrusion and then hot-pressed into sheets. The thermal properties (thermogravimetric analyses (TGA) and differential scanning calorimetry (DSC)) and fire properties (UL-94) were measured. The spinnability of the various composites was evaluated. The mechanical properties and physical aspect (microscopy) of PLA multifilaments with lignin (LK) were checked. A PLA multifilament with up to 10 wt % of intumescent formulation was processed, and the fire behavior of PLA fabrics with lignin/AP formulation was studied by cone calorimeter.

Application of Contact Angle Measurement to the Manufacture of Textiles Containing Microcapsules

The efficiency of a binder to link microcapsules on a textile surface depends on the compatibility of the different interfaces of the products involved in the coating process. The choice of a binder adapted to the microcapsules was determined in this study by the comparison of the surface energy components induced by the contact angle measurement method and washing tests. It was found that a polyurethane-based binder was the most suitable to link melamine formaldehyde microcapsules. Furthermore, the adhesion of microcapsules was closely dependent on the chemical nature and structure of the textile support.

Development of Multilayer Microcapsules by a Phase Coacervation Method Based on Ionic Interactions for Textile Applications

The present study describes the development of multilayer microcapsules by 11 alternate additions of chitosan (Chi) and sodium dodecyl sulfate (SDS) in a combined emulsification and phase coacervation method based on ionic interactions. After an alkali treatment, microcapsules are applied on polyester (PET) fabric by a padding process to investigate their wash-durability on fabric. Air atmospheric plasma treatment is performed on PET fabric to modify the surface properties of the textiles. Zeta potential, X-ray photoelectron spectroscopy (XPS), wetting measurements, scanning electron microscopy (SEM), and atomic force microscopy (AFM) with surface roughness measurements are realized to characterize and determine wash durability of microcapsule samples onto PET. After alkali treatment, the microcapsules are selected for textile application because they are submicron sized with the desired morphology. The results obtained from various characterization techniques indicate that microcapsules are wash-durable on PET fabric pre activated by air plasma atmospheric as Chi based microcapsules can interact directly with PET by ionic interactions.

Curcumin-Loaded Nanocapsules: Formulation and Influence of the Nanoencapsulation Processes Variables on the Physico-Chemical Characteristics of the Particles

The aim of this work was to assess the influence of various formulation parameters on the incorporation of Curcumin into nanoparticles. For this purpose, the influence of the aqueous monomer (ethylene diamine, hexamethylene diamine, and 1,4-diaminobutane), as well as the effect of the stirring rate and the influence of the nanoencapsulation method on the encapsulation efficiency were investigated. It was found that variation in the amount of ingredients had profound effects on the curcuminoid loading capacity, the mean particle size, and size distribution. Furthermore, from the thermal results, it is concluded that the reactivity of diamine and the length of flexible methylene chain in diamine determine the thermal properties of resultant polymer wall membrane. The encapsulation yield depends not only on the encapsulation process but also on the chemical structure of the diamine. Whereas, the size and its distribution vary according to the process choice and the emulsification stirring rate.

The Influence of 1-Butanol and Trisodium Citrate Ion on Morphology and Chemical Properties of Chitosan-Based Microcapsules during Rigidification by Alkali Treatment

Linseed oil which has various biomedical applications was encapsulated by chitosan (Chi)-based microcapsules in the development of a suitable carrier. Oil droplets formed in oil-in-water emulsion using sodium dodecyl sulfate (SDS) as emulsifier was stabilized by Chi, and microcapsules with multilayers were formed by alternate additions of SDS and Chi solutions in an emulsion through electrostatic interaction. No chemical cross-linker was used in the study and the multilayer shell membrane was formed by ionic gelation using Chi and SDS. The rigidification of the shell membrane of microcapsules was achieved by alkali treatment in the presence of a small amount of 1-butanol to reduce aggregation. A trisodium citrate solution was used to stabilize the charge of microcapsules by ionic cross-linking. Effects of butanol during alkali treatment and citrate in post alkali treatment were monitored in terms of morphology and the chemical properties of microcapsules. Various characterization techniques revealed that the aggregation was decreased and surface roughness was increased with layer formation.

Surface behavior and bulk properties of aqueous chitosan and type-B gelatin solutions for effective emulsion formulation

The behavior of aqueous chitosan (CH), type-B gelatin (GB) and CH-GB coacervate was studied on oil-in-water emulsion formulation at various pH and concentration ratio. The coacervate was formed by phase separation at ratios CH:GB, 1:10 to 1:1 with total biopolymer concentrations of 0.55%-1.0% (w/v) at pH 4.0-5.5. Soluble complexes were formed below pH 5.0 and coacervate formation was confirmed at pH 5.0 and above by zeta potential and UV-spectroscopy measurements. The coacervate formation was found maximum at the CH-GB ratios of 1:10 and 1:5 at pH 5.5. Formulated emulsions (>10μm droplets) using 1% (w/v) chitosan and GB were found stable (+52.5mv and creaming index 86%) and unstable respectively. Emulsion stabilized by mixed CH:GB 1:5 (3%w/v) had no creaming effect. The instability was attributed to the lower surface activity (K=5.0Lg-1) of pure GB compared to CH (K=14.3Lg-1). The formulation and methods can successfully tune the stability of the emulsions.

Chitosan-Based Sustainable Textile Technology: Process, Mechanism, Innovation, and Safety

This chapter reviews relevant findings regarding the activities and contributions of chitosan in different textile processing following the varieties of process, mechanism, and applications. Chitosan is a better candidate in both aspects of biodegradability and efficiency instead of synthetic polymers. The technical and scientific discussions behind the role of chitosan in all the processes and treatments have been explored in the chapter. Over the last few years, enormous efforts and challenges are being practiced in research and industry to design and development of eco-friendly and sustainable technologies. Therefore, the chapter emphasizes on chitosan-based formulations of fibers, fabrics, coatings, and functional textiles.