Farzad Behafarid

Particle Size Effects in the Catalytic Electroreduction of CO2 on Cu Nanoparticles

A study of particle size effects during the catalytic CO2 electroreduction on size-controlled Cu nanoparticles (NPs) is presented. Cu NP catalysts in the 2-15 nm mean size range were prepared, and their catalytic activity and selectivity during CO2 electroreduction were analyzed and compared to a bulk Cu electrode. A dramatic increase in the catalytic activity and selectivity for H2 and CO was observed with decreasing Cu particle size, in particular, for NPs below 5 nm. Hydrocarbon (methane and ethylene) selectivity was increasingly suppressed for nanoscale Cu surfaces. The size dependence of the surface atomic coordination of model spherical Cu particles was used to rationalize the experimental results. Changes in the population of low-coordinated surface sites and their stronger chemisorption were linked to surging H2 and CO selectivities, higher catalytic activity, and smaller hydrocarbon selectivity. The presented activity-selectivity-size relations provide novel insights in the CO2 electroreduction reaction on nanoscale surfaces. Our smallest nanoparticles (~2 nm) enter the ab initio computationally accessible size regime, and therefore, the results obtained lend themselves well to density functional theory (DFT) evaluation and reaction mechanism verification.

Shape-Dependent Catalytic Properties of Pt Nanoparticles

Tailoring the chemical reactivity of nanomaterials at the atomic level is one of the most important challenges in catalysis research. In order to achieve this elusive goal, fundamental understanding of the geometric and electronic structure of these complex systems at the atomic level must be obtained. This article reports the influence of the nanoparticle shape on the reactivity of Pt nanocatalysts supported on γ-Al(2)O(3). Nanoparticles with analogous average size distributions (∼0.8-1 nm), but with different shapes, synthesized by inverse micelle encapsulation, were found to display distinct reactivities for the oxidation of 2-propanol. A correlation between the number of undercoordinated atoms at the nanoparticle surface and the onset temperature for 2-propanol oxidation was observed, demonstrating that catalytic properties can be controlled through shape-selective synthesis.

Solving the Structure of Size-Selected Pt Nanocatalysts Synthesized by Inverse Micelle Encapsulation

The structure, size, and shape of gamma-Al(2)O(3)-supported Pt nanoparticles (NPs) synthesized by inverse micelle encapsulation have been resolved via a synergistic combination of imaging and spectroscopic tools. It is shown that this synthesis method leads to 3D NP shapes even for subnanometer clusters, in contrast to the raft-like structures obtained for the same systems via traditional deposition-precipitation methods. Furthermore, a high degree of atomic ordering is observed for the micellar NPs in H(2) atmosphere at all sizes studied, possibly due to H-induced surface reconstruction in these high surface area clusters. Our findings demonstrate that the influence of NP/support interactions on NP structure can be diminished in favor of NP/adsorbate interactions when NP catalysts are prepared by micelle encapsulation methods.

Evolution of the Structure and Chemical State of Pd Nanoparticles during the in Situ Catalytic Reduction of NO with H2

An in-depth understanding of the fundamental structure of catalysts during operation is indispensable for tailoring future efficient and selective catalysts. We report the evolution of the structure and oxidation state of ZrO(2)-supported Pd nanocatalysts (∼5 nm) during the in situ reduction of NO with H(2) using X-ray absorption fine-structure spectroscopy and X-ray photoelectron spectroscopy. Prior to the onset of the reaction (≤120 °C), a NO-induced redispersion of our initial metallic Pd nanoparticles over the ZrO(2) support was observed, and Pd(δ+) species were detected. This process parallels the high production of N(2)O observed at the onset of the reaction (>120 °C), while at higher temperatures (≥150 °C) the selectivity shifts mainly toward N(2) (∼80%). Concomitant with the onset of N(2) production, the Pd atoms aggregate again into large (6.5 nm) metallic Pd nanoparticles, which were found to constitute the active phase for the H(2)-reduction of NO. Throughout the entire reaction cycle, the formation and stabilization of PdO(x) was not detected. Our results highlight the importance of in situ reactivity studies to unravel the microscopic processes governing catalytic reactivity.

Long-range segregation phenomena in shape-selected bimetallic nanoparticles: chemical state effects.

A study of the morphological and chemical stability of shape-selected octahedral Pt0.5Ni0.5 nanoparticles (NPs) supported on highly oriented pyrolytic graphite (HOPG) is presented. Ex situ atomic force microscopy (AFM) and in situ X-ray photoelectron spectroscopy (XPS) measurements were used to monitor the mobility of Pt0.5Ni0.5 NPs and to study long-range atomic segregation and alloy formation phenomena under vacuum, H2, and O2 environments. The chemical state of the NPs was found to play a pivotal role in their surface composition after different thermal treatments. In particular, for these ex situ synthesized NPs, Ni segregation to the NP surface was observed in all environments as long as PtOx species were present. In the presence of oxygen, an enhanced Ni surface segregation was observed at all temperatures. In contrast, in hydrogen and vacuum, the Ni outward segregation occurs only at low temperature (<200-270 °C), while PtOx species are still present. At higher temperatures, the reduction of the Pt oxide species results in Pt diffusion toward the NP surface and the formation of a Ni-Pt alloy. A consistent correlation between the NP surface composition and its electrocatalytic CO oxidation activity was established.

Electronic properties and charge transfer phenomena in Pt nanoparticles on γ-Al2O3: size, shape, support, and adsorbate effects.

This study presents a systematic detailed experimental and theoretical investigation of the electronic properties of size-controlled free and γ-Al(2)O(3)-supported Pt nanoparticles (NPs) and their evolution with decreasing NP size and adsorbate (H(2)) coverage. A combination of in situ X-ray absorption near-edge structure (XANES) and density functional theory (DFT) calculations revealed changes in the electronic characteristics of the NPs due to size, shape, NP-adsorbate (H(2)) and NP-support interactions. A correlation between the NP size, number of surface atoms and coordination of such atoms, and the maximum hydrogen coverage stabilized at a given temperature is established, with H/Pt ratios exceeding the 1 : 1 ratio previously reported for bulk Pt surfaces.

Shape-selected bimetallic nanoparticle electrocatalysts: evolution of their atomic-scale structure, chemical composition, and electrochemical reactivity under various chemical environments

Solid surfaces generally respond sensitively to their environment. Gas phase or liquid phase species may adsorb and react with individual surface atoms altering the solid-gas and solid-liquid electronic and chemical properties of the interface. A comprehensive understanding of chemical and electrochemical interfaces with respect to their responses to external stimuli is still missing. The evolution of the structure and composition of shape-selected octahedral PtNi nanoparticles (NPs) in response to chemical (gas-phase) and electrochemical (liquid-phase) environments was studied, and contrasted to that of pure Pt and spherical PtNi NPs. The NPs were exposed to thermal annealing in hydrogen, oxygen, and vacuum, and the resulting NP surface composition was analyzed using X-ray photoelectron spectroscopy (XPS). In gaseous environments, the presence of O2 during annealing (300 °C) lead to a strong segregation of Ni species to the NP surface, the formation of NiO, and a Pt-rich NP core, while a similar treatment in H2 lead to a more homogenous Pt-Ni alloy core, and a thinner NiO shell. Further, the initial presence of NiO species on the as-prepared samples was found to influence the atomic segregation trends upon low temperature annealing (300 °C). This is due to the fact that at this temperature nickel is only partially reduced, and NiO favors surface segregation. The effect of electrochemical cycling in acid and alkaline electrolytes on the structure and composition of the octahedral PtNi NPs was monitored using image-corrected high resolution transmission electron microscopy (TEM) and high-angle annular dark field scanning TEM (HAADF-STEM). Sample pretreatments in surface active oxygenates, such as oxygen and hydroxide anions, resulted in oxygen-enriched Ni surfaces (Ni oxides and/or hydroxides). Acid treatments were found to strongly reduce the content of Ni species on the NP surface, via its dissolution in the electrolyte, leading to a Pt-skeleton structure, with a thick Pt shell and a Pt-Ni core. The presence of Ni hydroxides on the NP surface was shown to improve the kinetics of the electrooxidation of CO and the electrocatalytic hydrogen evolution reactions. The affinity to water and the oxophilicity of Ni hydroxides are proposed as likely origin of the observed effects.

Stability of platinum nanoparticles supported on SiO2/Si(111): a high-pressure X-ray photoelectron spectroscopy study.

The stability of Pt nanoparticles (NPs) supported on ultrathin SiO(2) films on Si(111) was investigated in situ under H(2) and O(2) (0.5 Torr) by high-pressure X-ray photoelectron spectroscopy (HP-XPS) and ex situ by atomic force microscopy (AFM). No indication of sintering was observed up to 600 °C in both reducing and oxidizing environments for size-selected Pt NPs synthesized by inverse micelle encapsulation. However, HP-XPS revealed a competing effect of volatile PtO(x) desorption from the Pt NPs (~2 and ~4 nm NP sizes) at temperatures above 450 °C in the presence of 0.5 Torr of O(2). Under oxidizing conditions, the entire NPs were oxidized, although with no indication of a PtO(2) phase, with XPS binding energies better matching PtO. The stability of catalytic NPs in hydrogenation and oxidation reactions is of great importance due to the strong structure sensitivity observed in a number of catalytic processes of industrial relevance. An optimum must be found between the maximization of the surface active sites and metal loading (i.e., minimization of the NP size), combined with the maximization of their stability, which, as it will be shown here, is strongly dependent on the reaction environment.

In situ coarsening study of inverse micelle-prepared Pt nanoparticles supported on γ-Al2O3: pretreatment and environmental effects

The thermal stability of inverse micelle prepared Pt nanoparticles (NPs) supported on nanocrystalline γ-Al(2)O(3) was monitored in situ under different chemical environments (H(2), O(2), H(2)O) via extended X-ray absorption fine-structure spectroscopy (EXAFS) and ex situ via scanning transmission electron microscopy (STEM). Drastic differences in the stability of identically synthesized NP samples were observed upon exposure to two different pre-treatments. In particular, exposure to O(2) at 400 °C before high temperature annealing in H(2) (800 °C) was found to result in the stabilization of the inverse micelle prepared Pt NPs, reaching a maximum overall size after moderate coarsening of ∼1 nm. Interestingly, when an analogous sample was pre-treated in H(2) at ∼400 °C, a final size of ∼5 nm was reached at 800 °C. The beneficial role of oxygen in the stabilization of small Pt NPs was also observed in situ during annealing treatments in O(2) at 450 °C for several hours. In particular, while NPs of 0.5 ± 0.1 nm initial average size did not display any significant sintering (0.6 ± 0.2 nm final size), an analogous thermal treatment in hydrogen leads to NP coarsening (1.2 ± 0.3 nm). The same sample pre-dosed and annealed in an atmosphere containing water only displayed moderate sintering (0.8 ± 0.3 nm). Our data suggest that PtO(x) species, possibly modifying the NP/support interface, play a role in the stabilization of small Pt NPs. Our study reveals the enhanced thermal stability of inverse micelle prepared Pt NPs and the importance of the sample pre-treatment and annealing environment in the minimization of undesired sintering processes affecting the catalytic performance of nanosized particles.

Towards the Understanding of Sintering Phenomena at the Nanoscale: Geometric and Environmental Effects

One of the technologically most important requirements for the application of supported metal nanoparticles (NPs) to the field of heterogeneous catalysis is the achievement of thermally and chemically stable systems under reaction conditions. For this purpose, a thorough understanding of the different pathways underlying coarsening phenomena is needed. In particular, in depth knowledge must be achieved on the role of the NP synthesis method, geometrical features of the NPs (size and shape), initial NP dispersion on the support (interparticle distance), support pre-treatment (affecting its morphology and chemical state), and reaction environment (gaseous or liquid medium, pressure, temperature). This study provides examples of the stability and sintering behavior of nanoscale systems monitored ex situ, in situ, and under operando conditions via transmission electron microscopy, atomic force microscopy, scanning tunneling microscopy, and X-ray absorption fine-structure spectroscopy. Experimental data corresponding to physical-vapor-deposited and micelle-synthesized metal (Pt, Au) NPs supported on TiO2, SiO2 and Al2O3 will be used to illustrate Ostwald-ripening and diffusion coalescence processes. In addition, the role of the annealing environment (H2, O2, water vapor) on the stability of NPs will be discussed.