Federica Altieri

Impaction of permanent mandibular second molar: A retrospective study

Objective: To determine the prevalence of impacted mandibular second molar (MM2) and the association between MM2 impaction and crowding. The clinical significance of the angle between first and second mandibular molar and of the space between the first mandibular molar (MM1) and the anterior margin of mandibular ramus in MM2 impaction were also evaluated. Material and Methods: In this retrospective study , from the dental records of 2,945 caucasian young orthodontics patients, 40 subjects with MM2 impaction were included in a study group (SG) and compared with a control group (CG) of 200 subjects without MM2 impactions. The crowding, the angle of inclination of MM2, the distance between MM1 and mandibular ramus, the canine and molar relationships, and the lower centre line discrepancy were measured. For the statistical analysis , descriptive statistics and t-Student for independent sample groups were used. Results: The prevalence of impacted MM2 was 1.36%. The independent-Samples t-Test between SG and CG showed: the presence of crowding (P≤0.001), an higher angle values of MM2 inclination (P≤0.001) and a smaller distance between MM1 and the anterior margin of mandibular ramus (P≤0.001) in the SG. Conclusion: The impaction of MM2 is a relatively rare occurrence in orthodontic caucasian populations. The crowding, a higher angle values of MM2 inclination and a reduced distance between MM1 and the anterior margin of mandibular ramus, at the time of one third of MM2 root formation (T1), characterize MM2 impaction. Key words:Impacted mandibular second molar, impaction, orthodontics.

Evaluation of alveolar cortical bone thickness and density for orthodontic mini-implant placement.

Objective: Mini-implant stability is primarily related to bone quality and quantity. This study evaluated alveolar cortical bone thickness and density differences between interradicular sites at different levels from the alveolar crest, and assessed the differences between adolescents (12-18 years of age) and adults (19-50 years of age), males and females, upper and lower arch, anterior and posterior region of jaws and buccal and oral side. Study Design: In this retrospective study, 48 Computed Tomography scans, performed for oral surgery purposes were selected from dental records of 3,223 Caucasian orthodontic patients. The SimPlant software (Materialise, Leuven, Belgium) was used to measure cortical bone thickness and density at 13 interradicular sites and four bone levels ( 2,4,6 and 8 mm ). For the statistical analysis descriptive statistics, Student’s t-test and Pearson correlation coefficient were used. Results: Statistically significant differences in alveolar cortical bone thickness and density between age, gender, sites and sides were found (P<0.05). The Pearson correlation coefficient demonstrated a significant linear increasing of thickness and density from crest to base of alveolar crest (P≤0.05). Conclusion. Adults show a thicker alveolar cortical bone than adolescents. Alveolar cortical bone thickness and density were greater in males than in females, in mandible than in maxilla, in the posterior region than the anterior, in oral than buccal side. There is an increase of thickness and density from crest to base of alveolar crest. Key words:Orthodontics, cortical bone thickness, cortical bone density, mini-implant, computed tomography, temporary anchorage devices.

The combined use of computer-guided, minimally invasive, flapless corticotomy and clear aligners as a novel approach to moderate crowding: A case report

The aim of this case report was to describe an innovative orthodontic treatment method that combined surgical and orthodontic techniques. The novel method was used to achieve a positive result in a case of moderate crowding by employing a computer-guided piezocision procedure followed by the use of clear aligners. A 23-year-old woman had a malocclusion with moderate crowding. Her periodontal indices, oral health-related quality of life (OHRQoL), and treatment time were evaluated. The treatment included interproximal corticotomy cuts extending through the entire thickness of the cortical layer, without a full-thickness flap reflection. This was achieved with a three-dimensionally printed surgical guide using computer-aided design and computer-aided manufacturing. Orthodontic force was applied to the teeth immediately after surgery by using clear appliances for better control of tooth movement. The total treatment time was 8 months. The periodontal indices improved after crowding correction, but the oral health impact profile showed a slight deterioration of OHRQoL during the 3 days following surgery. At the 2-year retention follow-up, the stability of treatment was excellent. The reduction in surgical time and patient discomfort, increased periodontal safety and patient acceptability, and accurate control of orthodontic movement without the risk of losing anchorage may encourage the use of this combined technique in appropriate cases.

Morphological and topographical characteristics of posterior supernumerary molar teeth: an epidemiological study on 25,186 subjects.

Objectives: To investigate the prevalence , gender difference , arch , morphology and position within the arch of supernumerary molar (SM) teeth in a referred Italian Caucasian population. Study Design: Records of 25,186 young patients were evaluated. Only data related to supernumerary teeth in the posterior region of the jaws were analyzed. The diagnosis of hyperdontia was formulated during the clinical and radiological examinations based on panoramic radiographs. Statistical analysis was conducted at level of subjects in the assessment of prevalence of SMs and sex ratio. Statistical analysis was conducted at level of teeth according to their morphological and topographic characteristics. The analysis of association between supernumerary morphology and arch, between supernumerary position and arch and between morphology and position was performed using the χ2 test (P≤ 0.05). Results: 61 posterior supernumerary teeth were found in 45 patients. The male to female ratio was 2.5:1 ;the mean age was 21.23 (IC:95%).The SMs were found more frequently in the maxilla (62.3%) than in the mandible; supernumerary teeth (60.7%) were more frequent than supplemental teeth. The SMs were mostly of tuberculate shape (56.8%) and paramolars teeth (64.9%) were more common than distomolars. 54% of teeth were erupted in the arch. No statistically significant relationship were found between the supernumerary teeth shape and the arch (P= 0.087) , between supernumerary teeth position and the arch (P=0.511) and between morphology and position (P=0.216). Conclusions: Epidemiological studies related to supernumerary teeth can be useful to clinicians in the early diagnosis of this anomaly. In this retrospective study the prevalence of SMs was 0.18%. SMs were more frequent in males and in the maxilla. Supernumerary were more frequent than supplemental; the conical morphology and paramolar position were the most common shape and position. Key words:Hyperdontia, prevalence, supernumerary molars, distomolar, paramolar.

Etiological factors in second mandibular molar impaction.

Objectives: The impaction of the second mandibular molar (MM2) has recently become more prevalent. Several etiological hypothesis have been proposed to investigate the association between skeletal features and impaction of MM2. The aims of this study were to analyze the skeletal features in patients with MM2 impaction and the association between arrested eruption of MM2 and the presence of the third mandibular molar (MM3). Study Design: In this retrospective study 48 subjects from 3,530 Caucasian orthodontic patients with MM2 impaction were included in a study group (SG) and compared to a control group (CG) of 200 subjects without MM2 impaction. Panoramic radiographs evaluated the presence or absence of the MM3 germ. Cephalometric analysis was performed to evaluate linear and angular skeletal values. For the statistical analysis, descriptive statistics, Student’s t-test, χ2 test and odds ratio (OR) were used. Results: The paired comparisons between SG and CG showed in cephalometric analysis both a reduced mandibular gonial angle (ArGoMe) and lowered Jarabak’s polygon value with a statistically significant difference (P≤ 0.05). MM3 was statistically significant associated (P≤ 0.05) with MM2 impaction but it is not a risk factor (OR 0.817). Conclusions: Subjects with MM2 impaction show a vertical condylar growth direction. MM3 is not a risk factor for MM2 impaction. Key words:Impacted mandibular second molar, skeletal features, orthodontic.

The combined use of corticotomy and clear aligners: A case report.

OBJECTIVE To describe an orthodontic treatment that combines an esthetic approach (clear aligners) with surgery (alveolar corticotomy). MATERIALS AND METHODS A patient with moderate dental crowding and Class I skeletal and molar relationships was selected. Orthodontic records of the patient were taken. Periodontal indexes, oral health-related quality of life (OHRQoL), and treatment time were evaluated. After we reflected a full-thickness flap beyond the teeth apices, the cortical bone was exposed on the buccal aspect and a modified corticotomy procedure was performed. Interproximal corticotomy cuts were extended through the entire thickness of the cortical layer, just barely penetrating into medullary bone. Orthodontic force was applied on the teeth immediately after surgery. RESULTS Total treatment time was 2 months. Periodontal indexes were improved after correction of crowding. A deterioration of OHRQoL was limited to 3 days following surgery. CONCLUSION This case report may encourage the use, limited to selected cases, of corticotomy associated with clear aligners to treat moderate crowding.

The influence of mandibular third molar germectomy on the treatment time of impacted mandibular second molars using brass wire: a prospective clinical pilot study

The brass wire ligature is an efficient method to correct a moderately mesially impacted mandibular second molar (MM2). The aim of this prospective clinical pilot study was to evaluate the influence of mandibular third molar (MM3) germectomy on the treatment time for this procedure and to determine its impact on oral health-related quality of life (OHRQoL) using the short-form Oral Health Impact Profile (OHIP-14). The STROBE guidelines were followed. Impacted MM2 were assigned randomly to receive brass wire ligature treatment either with germectomy (group A) or without germectomy (group B). Descriptive statistics and the Student t-test were used in the statistical analysis; significance was set at P≤0.05. One thousand and thirty patients were assessed. Fourteen subjects with 20 mesially angulated (range 25-40°) impacted MM2 were identified. Paired comparisons of groups A and B showed no statistically significant difference in treatment time (171days for group A and 174days for group B; P=0.440), but a statistically significant difference in OHIP-14 values at the 3- (P=0.017) and 7-day (P=0.002) follow-up. The brass wire technique can be used effectively in moderately impacted MM2, but the combined use of MM3 germectomy does not influence the treatment time and shows a negative impact on OHRQoL.

Palatal orthodontic miniscrew insertion using a CAD-CAM surgical guide: description of a technique

The aim of this report was to describe a new computer-guided technique for a controlled site preparation and palatal orthodontic miniscrew insertion using a dedicated software. A surgical guide was designed after planning the appropriate insertion sites on three-dimensional images created by the fusion of cone-beam computed tomography (CBCT) and digital dental model images. Pre- and postoperative CBCT images were compared and the angular, coronal, and apical deviations between the planned and the placed miniscrews were calculated. The mean coronal and apical deviations were 1.38mm (range: 3.48-0.15mm; standard deviation (SD): 0.65) and 1.73mm (range: 5.41-0.10mm; SD: 1.03), respectively, while the mean angular deviation was 4.60° (range: 15.23-0.54°; SD: 2.54). The present surgical guide allows a controlled and accurate palatal miniscrew placement in three dimensions.

Mirror imaging of impacted and supernumerary teeth in dizygotic twins: A case report.

Background: Mesiodens is the most common type of supernumerary tooth found in the premaxilla. It might be discovered by the clinical examination by chance on a radiograph or as the cause of an unerupted maxillary central incisor. The genetic transmission of supernumerary and impacted teeth is poorly understood. Mirror imaging in twins has been reported frequently in relation to several unilateral dental anomalies including mesiodens. This phenomenon is the appearance of an asymmetrical feature or anomaly occurring on the right side of one twin but on the left side of the other twin. The event of mesiodens mirror imaging in monozygotic twins has been described in literature. Results: This is the first reported case of mesiodens mirror images in dizygotic twins. The de-scribed mesiodens caused the eruption failure of maxillary permanent incisors. The super-numerary teeth were removed to facilitate the spontaneous eruption of the impacted perma-nent maxillary incisors. Clinical Implications: Studies related to supernumerary teeth can be useful to clinicians in the early diagnosis of this anomaly. Clinical and radiographic examinations provide a correct therapeutic approach. Key words:Supernumerary teeth, twins, dental development.