Sabrina Calasso

Accuracy of two stereolithographic surgical templates: A retrospective study

BACKGROUND The use of computer software and stereolithography for dental implant therapy has significantly increased during the last few years. The aim of this study was to evaluate and compare the mean accuracy and maximum deviations values of dental implant placement using two stereolithographic (SLA) guide systems. MATERIALS AND METHODS Twenty patients were selected and 227 implants were inserted using bone-, tooth- and mucosa-supported SLA surgical guides. Thirty-one guides, both single- and multiple-type, were used. Some of the single-type surgical guides were fixed with osteosynthesis screws. A postoperative computer tomography (CT) was performed and an iterative closest point algorithm was used to match the jaw of the CT preoperative with the jaw of the postoperative CT. Quantitative data of each group were described. The t-test was used to determine the influence of the utilization of the different types of SLA on accuracy values. RESULTS t-Test demonstrated a better accuracy of the multiple-type guides in almost all deviation values when the mucosa-supported guides were considered. Regarding the bone-supported template, the single-type fixed group showed a better accuracy while the highest values of deviation were registered by the multiple-type guides. The single-type group showed a better accuracy when the tooth support was considered. CONCLUSIONS The results of the present study indicated best accuracy of the single-type guide using a bone or tooth support. The multiple-type guide recorded the best accuracy data when the mucosa support was considered comparing either a fixed and a not-fixed single-type guide.

Depth deviation and occurrence of early surgical complications or unexpected events using a single stereolithographic surgi-guide §

The purpose of this study was to determine the accuracy of depth implant insertion and to describe the frequency of early surgical complications or unexpected events, recorded using a single, totally guided, stereolithographic surgi-guide (bone-, mucosa- and teeth-supported) for both osteotomy site preparation and implant delivery. Ten adults were included in this study. Six patients were treated in both arches, and the number of computer aided implantology (CAI) interventions was 16, which equalled the number of guides used, for a total of 111 implants inserted. Complications and unexpected events occurred during the positioning of the surgical guide and whilst preparing the implant site and installing implants. In order to minimize the risk of complications and unexpected events, attention must be paid to every stage of treatment, including checking computed tomography (CT) images, guide manufacturing, proper guide positioning in the mouth, guide fixation, rotational allowance of drill in tubes, shape and sharpness of the drills, first entry point, mouth opening and guided implant insertion.

Early peri-implant bone loss: a prospective cohort study

The aim of this study was to measure the early peri-implant bone level changes before the completion of an implant-abutment connection and to evaluate the influence of demographic, biologically relevant, anatomical, and implant-specific variables on these changes. A prospective cohort study design was used. STROBE guidelines were followed. The sample comprised 493 implants placed using a two-stage surgical procedure. Random allocation was used to determine the implant placement depth. Peri-apical radiographs taken at implant insertion and at the second surgery 2 months later were matched. Kappa statistics were used to compute intra- and inter-examiner reliability. The statistical analysis was performed at the implant level. Two-way analysis of variance (ANOVA) with the Bonferroni adjusted post hoc test was used to evaluate the influence of variables. One-way ANOVA with Tukeys range test and unpaired Student t-tests were used to analyze significant variables. Early marginal bone remodelling was -0.86 mm. The timing of implant placement (P=0.00) and the depth of implant placement (P≤0.05) significantly influenced early bone remodelling. Relevant radiographic early bone loss was found, but implants initially positioned below the alveolar crest and inserted ≥3 months after tooth extraction showed statistically significant higher marginal bone loss during the healing phase.

Minimally invasive corticotomy in orthodontics using a three-dimensional printed CAD/CAM surgical guide.

The aim of this prospective study was to evaluate the effectiveness of an innovative, minimally invasive, flapless corticotomy procedure in orthodontics. The STROBE guidelines were followed. Ten patients with severe dental crowding and a class I molar relationship were selected to receive orthodontic treatment with clear aligners and corticotomy-facilitated orthodontics. The mean age of these patients was 21 years (range 17-28, standard deviation 6.08 years); the male to female ratio was 2:1. The main outcome was a reduction in the total treatment time to correct dental crowding. The secondary outcomes were periodontal index changes, the degree of root resorption, and patient perceptions of the method used, assessed using the short-form Oral Health Impact Profile (OHIP-14). The occurrence of early surgical complications or unexpected events was also recorded. All patients completed the treatment to correct dental crowding. The average treatment time was reduced by two-thirds. The procedure did not significantly modify the periodontal indices or oral health-related quality of life. No early surgical complications or unexpected events were observed. In short, the results indicate that this new procedure is safe and accelerates tooth movement without periodontal complications or discomfort. However, the efficacy of this procedure must be confirmed in controlled clinical trials.

Accuracy of a computer-aided implant surgical technique.

The purpose of this in vivo retrospective study was to evaluate the accuracy of a computer-designed stereolithographic surgical guide. One hundred eleven implants were placed in 10 patients. Pre- and postoperative computed tomography images were compared using specific software. Global, angular, depth, and lateral deviations were calculated between planned and placed implants. Mean global deviations between planned and placed implants at the coronal and apical aspects were 1.52 mm (range, 0.13 to 3.00 mm) and 1.97 mm (range, 0.34 to 4.23 mm), respectively, while the mean angular deviation was 4.68 degrees (range, 0.10 to 15.25 degrees). This study highlighted a reasonable mean accuracy with relatively high maximum deviations between the postoperative position and the preoperative plan. These results should serve as a warning for the clinician if implants are placed near vital structures.

Peri-implant bone loss around platform-switched Morse taper connection implants: a prospective 60-month follow-up study

The aim of this study was to measure the crestal bone level changes at 60 months of follow-up and to evaluate the influence of biologically relevant, anatomical, and implant-related variables. A prospective study design was used. STROBE guidelines were followed. A total of 576 implants were inserted in 270 patients needing an implant-supported, partial, fixed dental prosthesis or a single crown. Standardized peri-apical radiographs were obtained at 2 months (time of implant-abutment connection and prosthetic loading) and 60 months of follow-up. Descriptive statistics were used and inter- and intra-examiner reliability determined. A mixed model was used to evaluate the predictor variables. The correlation among multiple implants inserted in a single patient was considered. Significance was assessed using the type 3 test. Sensitivity analyses, least-squares means analyses, t-tests, and χ2 tests were also conducted. The statistical analysis was performed at the implant level; P<0.05 indicated statistical significance. At the 60-month follow-up, the mean marginal bone remodelling was -0.59±1.34mm (range -5.70 to 3.65mm). Marginal bone loss was significantly influenced by implant depth, implant location, and the interactions implant depth×jaw, implant location×timing of implant placement, and jaw×implant diameter. At the 60-month follow-up, a low mean marginal bone loss was found, which was significantly higher with subcrestal implants and anterior implants.

Morphological and topographical characteristics of posterior supernumerary molar teeth: an epidemiological study on 25,186 subjects.

Objectives: To investigate the prevalence , gender difference , arch , morphology and position within the arch of supernumerary molar (SM) teeth in a referred Italian Caucasian population. Study Design: Records of 25,186 young patients were evaluated. Only data related to supernumerary teeth in the posterior region of the jaws were analyzed. The diagnosis of hyperdontia was formulated during the clinical and radiological examinations based on panoramic radiographs. Statistical analysis was conducted at level of subjects in the assessment of prevalence of SMs and sex ratio. Statistical analysis was conducted at level of teeth according to their morphological and topographic characteristics. The analysis of association between supernumerary morphology and arch, between supernumerary position and arch and between morphology and position was performed using the χ2 test (P≤ 0.05). Results: 61 posterior supernumerary teeth were found in 45 patients. The male to female ratio was 2.5:1 ;the mean age was 21.23 (IC:95%).The SMs were found more frequently in the maxilla (62.3%) than in the mandible; supernumerary teeth (60.7%) were more frequent than supplemental teeth. The SMs were mostly of tuberculate shape (56.8%) and paramolars teeth (64.9%) were more common than distomolars. 54% of teeth were erupted in the arch. No statistically significant relationship were found between the supernumerary teeth shape and the arch (P= 0.087) , between supernumerary teeth position and the arch (P=0.511) and between morphology and position (P=0.216). Conclusions: Epidemiological studies related to supernumerary teeth can be useful to clinicians in the early diagnosis of this anomaly. In this retrospective study the prevalence of SMs was 0.18%. SMs were more frequent in males and in the maxilla. Supernumerary were more frequent than supplemental; the conical morphology and paramolar position were the most common shape and position. Key words:Hyperdontia, prevalence, supernumerary molars, distomolar, paramolar.

A 36-month follow-up prospective cohort study on peri-implant bone loss of Morse Taper connection implants with platform switching

A prospective cohort study was designed to measure marginal bone level changes at 36-month follow-up and to evaluate the influence of biologically relevant, anatomic and stress-related variables. STROBE guidelines were followed. Totally, 748 implants were inserted into 350 patients. Standardized periapical radiographs were taken at 2- (stage-two surgery), 12-, 24-, and 36-month follow-ups. Descriptive statistics were used and inter- and intra-examiner reliability were determined. A mixed-model was used to evaluate predictor variables. Statistical analysis was performed at implant level (statistical significance: P < 0.05). A total of 34 (4.5%) implants failed; of the 34 implants, 6 were early failures (0.8%) and 28 were late failures (3.7%). A total of 576 implants reached 36-month follow-up (mean follow-up: 25.58 months; SD: 10.32). Mean marginal bone remodeling was -0.56 mm. (SD: 1.30; range: -6.80 ± 3.65). A statistically significant, higher marginal bone loss was found for subcrestal implants and subcrestal implants inserted into the maxilla, for implants inserted into patients aged over 50 years, and for early-delayed implants inserted into patients aged over 50 years. In conclusion, a low, mean crestal bone loss at 36-month follow-up was recorded but implant positioning in the apico-occlusal dimension was found to be the most significant variable that influenced bone loss. (J Oral Sci 58, 49-57, 2016).

Etiological factors in second mandibular molar impaction.

Objectives: The impaction of the second mandibular molar (MM2) has recently become more prevalent. Several etiological hypothesis have been proposed to investigate the association between skeletal features and impaction of MM2. The aims of this study were to analyze the skeletal features in patients with MM2 impaction and the association between arrested eruption of MM2 and the presence of the third mandibular molar (MM3). Study Design: In this retrospective study 48 subjects from 3,530 Caucasian orthodontic patients with MM2 impaction were included in a study group (SG) and compared to a control group (CG) of 200 subjects without MM2 impaction. Panoramic radiographs evaluated the presence or absence of the MM3 germ. Cephalometric analysis was performed to evaluate linear and angular skeletal values. For the statistical analysis, descriptive statistics, Student’s t-test, χ2 test and odds ratio (OR) were used. Results: The paired comparisons between SG and CG showed in cephalometric analysis both a reduced mandibular gonial angle (ArGoMe) and lowered Jarabak’s polygon value with a statistically significant difference (P≤ 0.05). MM3 was statistically significant associated (P≤ 0.05) with MM2 impaction but it is not a risk factor (OR 0.817). Conclusions: Subjects with MM2 impaction show a vertical condylar growth direction. MM3 is not a risk factor for MM2 impaction. Key words:Impacted mandibular second molar, skeletal features, orthodontic.