Federico Polo

Iridium(III) Emitters Based on 1,4-Disubstituted-1H-1,2,3-triazoles as Cyclometalating Ligand: Synthesis, Characterization, and Electroluminescent Devices

A series of blue and blue-green emitters based on neutral bis- and tris-cyclometalated Ir(III) complexes with 1-benzyl-4-(2,6-difluorophenyl)-1H-1,2,3-triazole (dfptrBn) as cyclometalating ligand is reported. The bis-cyclometalated complexes of the type [Ir(dfptrBn)(2)(L(^)X)] with different ancillary ligands, L(^)X = picolinate (pic) (2) or 2-(5-(perfluorophenyl)-2H-1,2,4-triazol-3-yl)pyridine (pytrF(5)) (3), are described and their photophysical properties compared with the analogous complexes containing the archetypal 2-(2,4-difluorophenyl)pyridinato (dfppy) as cyclometaled ligand (C(^)N). Complex 2 exhibits a marked solvatochromic behavior, from 475 nm in toluene to 534 nm in formamide, due to the strong MLCT character of its emissive excited state. Complex 3 displays a true-blue emission, narrower in the visible part than FIrpic. In addition, the homoleptic complex [Ir(dfprBn)(3)] (4) and the heteroleptic compounds with mixed arylpyridine/aryltriazole ligands, [Ir(dfptrBn)(2)(C(^)N)] (C(^)N = 2-phenylpyridinato (ppy) (5) or dfppy (6)), have been synthesized and fully characterized. The facial (fac) complex fac-4 is emissive at 77 K showing a deep-blue emission, but it is not luminescent in solution at room temperature similarly to their phenylpyrazole counterparts. However, the fac isomers, fac-5 and fac-6, are highly emissive in solution and thin films, reaching emission quantum yields of 76%, with emission colors in the blue to blue-green region. The photophysical properties for all complexes have been rationalized by means of quantum-chemical calculations. In addition, we constructed electroluminescent devices, organic light-emitting diodes (OLEDs) by sublimation of fac-6, and by solution processed polymer-based devices (PLEDs) using complexes fac-5 or fac-6 as dopants.

Luminescent dinuclear Cu(I) complexes containing rigid tetraphosphine ligands.

The synthesis and the photophysics of three dinuclear copper(I) complexes containing bis(bidentate)phosphine ligands are described. The steric constraint imposed by tetrakis(di(2-methoxyphenyl)phosphanyl)cyclobutane) (o-MeO-dppcb) in combination with 2,9-dimethyl-1,10-phenanthroline in one of the complexes leads to interesting photophysical properties. The compound shows an intense emission at room temperature in deoxygenated acetonitrile solution (Φ = 49%) and a long excited-state lifetime (13.8 μs). Interestingly, at low temperature, 77 K, the emission maximum shifts to lower energy, and the excited-state lifetime increases. This observation leads to the conclusion that a mixing between the excited triplet and singlet states is possible and that the degree of mixing and population of state strongly depends on temperature, as the energy difference is quite small. The electroluminescent properties of this compound were therefore tested in light-emitting electrochemical cells (LEECs), proving that the bright emission can also be obtained by electrically driven population of the singlet state.

Electron transfer catalysis with monolayer protected Au25 clusters

Au₂₅L₁₈ (L = S(CH₂)₂Ph) clusters were prepared and characterized. The resulting monodisperse clusters were reacted with bis(pentafluorobenzoyl) peroxide in dichloromethane to form Au₂₅L₁₈⁺ quantitatively. The kinetics and thermodynamics of the corresponding electron transfer (ET) reactions were characterized via electrochemistry and thermochemical calculations. Au₂₅L₁₈⁺ was used in homogeneous redox catalysis experiments with a series of sym-substituted benzoyl peroxides, including the above peroxide, bis(para-cyanobenzoyl) peroxide, dibenzoyl peroxide, and bis(para-methoxybenzoyl) peroxide. Peroxide dissociative ET was catalyzed using both the Au₂₅L₁₈/Au₂₅L₁₈⁻ and the Au₂₅L₁₈⁺/Au₂₅L₁₈ redox couples as redox mediators. Simulation of the CV curves led to determination of the ET rate constant (k(ET)) values for concerted dissociative ET to the peroxides. The ET free energy ΔG° could be estimated for all donor-acceptor combinations, leading to observation of a nice activation-driving force (log k(ET)vs.ΔG°) relationship. Comparison with the k(ET) obtained using a ferrocene-type donor with a formal potential similar to that of Au₂₅L₁₈/Au₂₅L₁₈⁻ showed that the presence of the capping monolayer affects the ET rate rather significantly, which is attributed to the intrinsic nonadiabaticity of peroxide acceptors.

Photophysics and Electrochemiluminescence of Bright Cyclometalated Ir(III) Complexes in Aqueous Solutions

A family of neutral bis-cyclometalated iridium complexes [Ir(C^N)2(LX)] has been investigated as ECL labels under immunoassay conditions. Among them, the complex based on phenylphenanthridine (pphent) as the C^N ligand, exhibits outstanding performance and it is a candidate to substitute the commercially available Ru-based label in diagnostics.

Sterically Hindered Luminescent PtII–Phosphite Complexes for Electroluminescent Devices

Pt(II) complexes with one bulky, sterically demanding, tertiary phosphite ancillary ligand and a coordinating chromophore are herein presented. The phosphite ligand, tris(2,4-di-tert-butylphenyl) acts as a bidentate ligand coordinating the platinum ion through the central phosphorus atom and a cyclometalating carbon atom of one of the substituents. The two free phenoxy moieties lie above and below the coordination plane, leading to steric hindrance that avoids aggregation and provides solubility in organic solvents. The other two coordination sites on the central metal ion are occupied by a chromophoric ligand, which is responsible for the energy of the luminescent excited state. This separation of functions, on the two coordinated ligands, allows the use of a wider range of luminophores with good luminescent properties, maintaining the control of the intermolecular interactions with the non-chromophoric ligand. Based on this approach we were able to achieve a bright deep blue emission (λ=444 nm, Φem =0.38) from a complex with a tailored ligand, which was then used for the fabrication of an electroluminescent device. In addition commercially available luminophores were also employed to synthesize green emitters.

Luminescent acetylthiol derivative tripodal osmium(II) and iridium(III) complexes: Spectroscopy in solution and on surfaces*

Luminescent Os(II) and Ir(III) complexes containing a tripodal-type structure terminalized with three thiol derivatives are described. The tripod is introduced through derivatization, with a rigid spacer, of a phenanthroline ligand coordinated to the metal ion, and the entire structure possesses axial geometry. The geometry of the complexes combined with the three anchoring sites, the thiol groups, allows the complexes to adopt an almost perpendicular arrangement to the surfaces and the formation of a well-packed monolayer on Au substrates. The photophysical and electrochemical behavior of the complexes is studied in solution and on surfaces. Furthermore, a self-assembled monolayer (SAM) of Os(II) complexes on an ultraflat Au surface is used to fabricate a metal–molecule–metal junction with Au and In Ga eutectic as electrodes. The Os(II) SAM in the tunneling junction exhibits rectification behavior which is opposite in direction to that which we have previously shown for Ru(II) SAMs.

From Blue to Green: Fine-Tuning of Photoluminescence and Electrochemiluminescence in Bifunctional Organic Dyes

We describe the synthesis, computational analysis, photophysics, electrochemistry and electrochemiluminescence (ECL) of a series of compounds formed of two triphenylamines linked by a fluorene or spirobifluorene bridge. The phenylamine moieties were modified at the para-position of the two external rings by electron-withdrawing or electron-donating substituents. These modifications allowed for fine-tuning of the photoluminescence (PL) and ECL emission from blue to green, with an overall wavelength span of 73 (PL) and 67 (ECL) nm, respectively. For all compounds, we observed a very high PL quantum yield (79-89%) and formation of stable radical ions. The ECL properties were investigated by direct annihilation of the electrogenerated radical anion and radical cation. The radical-ion annihilation process is very efficient and causes an intense greenish-blue ECL emission, easily observable even by naked eye, with quantum yield higher than the standard 9,10-diphenylanthracene. The ECL spectra show one single band that almost matches the PL band. Because the energy of the annihilation reaction is higher than that required to form the singlet excited state, the S-route is considered the favored pathway followed by the ECL process in these molecules. All these features point to this type of molecular system as promising for ECL applications.

Interaction of Mixed-Ligand Monolayer-Protected Au144 Clusters with Biomimetic Membranes as a Function of the Transmembrane Potential

Understanding the interaction of nanoparticles with cell membranes is a high-priority research area for possible biomedical applications. We describe our findings concerning the interaction of Au144 monolayer-protected clusters (MPCs) with biomimetic membranes and their permeabilizing effect as a function of the transmembrane potential. We synthesized Au144(SCH2CH2Ph)60 and modified the capping monolayer with 8-mercaptooctanoic acid (Au144OctA) or thiolated trichogin (Au144TCG), a channel-forming peptide. The interactions of these MPCs with mercury-supported lipid mono- and bilayers were studied with a combination of electrochemical techniques specifically sensitive to changes in the properties of biomimetic membranes and/or charge-transfer phenomena. Permeabilization effects were evaluated through the influence of MPC uptake on the reduction of cadmium(II) ions. The nature and properties of the Au144 capping molecules play a crucial role in controlling how MPCs interact with membranes. The native MPC causes a small effect, whereas both Au144OctA and Au144TCG interact significantly with the lipid monolayer and show electroactivity. Whereas Au144OctA penetrates the membrane, Au144TCG pierces the membrane with its peptide appendage while remaining outside of it. Both clusters promote Cd(2+) reduction but with apparently different mechanisms. Because of the different way that they interact with the membrane, Au144OctA is more effective in Cd(2+) reduction when interacting with the lipid bilayer and Au144TCG performs particularly well when piercing the lipid monolayer.