Filomena Freitas

Advances in bacterial exopolysaccharides: from production to biotechnological applications

A vast number of bacterial extracellular polysaccharides (EPSs) have been reported over recent decades, and their composition, structure, biosynthesis and functional properties have been extensively studied. Despite the great diversity of molecular structures already described for bacterial EPSs, only a few have been industrially developed. The main constraints to full commercialization are their production costs, mostly related to substrate cost and downstream processing. In this article, we review EPS biosynthetic and fermentative processes, along with current downstream strategies. Limitations and constraints of bacterial EPS development are stressed and correlation of bacterial EPS properties with polymer applications is emphasized.

Characterization of an extracellular polysaccharide produced by a Pseudomonas strain grown on glycerol.

A new extracellular charged polysaccharide composed mainly by galactose, with lower amounts of mannose, glucose and rhamnose, was produced by the cultivation of Pseudomonas oleovorans NRRL B-14682 using glycerol as the sole carbon source. Thermal and solid-state NMR analysis showed that this polymer is essentially amorphous, with a glass transition temperature of 155.7 degrees C. The exopolysaccharide aqueous solutions have viscoelastic properties similar to that of Guar gum, but with affinity to salts as a result of its polyelectrolyte character. In addition, the exopolysaccharide has demonstrated good flocculating and emulsifying properties and film-forming capacity. These properties make this polymer a good alternative to more expensive natural polysaccharides, such as Guar gum, in several applications in the food, pharmaceutical, cosmetic, textile, paper and petroleum industries.

Recovery of polyhydroxybutyrate (PHB) from Cupriavidus necator biomass by solvent extraction with 1,2-propylene carbonate

An integrated procedure for the recovery of polyhydroxybutyrate (PHB) produced by Cupriavidus necator based on the extraction with 1,2‐propylene carbonate was evaluated. The effect of temperature (100–145°C) and contact time (15–45 min), precipitation period, and biomass pretreatments (pH shock and/or thermal treatments) on PHB extraction efficiency and polymer properties was evaluated. The highest yield (95%) and purity (84%) were obtained with the combination of a temperature of 130°C and a contact time of 30 min, with a precipitation period of 48 h. Under these conditions, PHB had a molecular weight of 7.4×105, which was the highest value obtained. Lower values (2.2×105) were obtained for higher temperatures (145°C), while lower temperatures resulted in incomplete extraction yields (45–54%). No further yield improvement was achieved with the pH/heat pretreatments, but the polymers molecular weight was increased to 1.3×106. The PHB physical properties were not significantly affected by any of the tested procedures, as shown by the narrow ranges obtained for the glass transition temperature (4.8–5.0°C), melting temperature (170.1–180.1°C), melting enthalpy (77.8–88.5 J/g) and crystallinity (55–62%). 1,2‐Propylene carbonate was shown to be an efficient solvent for the extraction of PHB from biomass. The precipitation procedure was found to highly influence the polymer recovery and its molecular weight. Although polymer molecular weight and purity were improved by applying pH/heat pretreatment to the biomass, the procedure involves the use of large amounts of chemicals, which increases the recovery costs and makes the process environmentally unfriendly.

Production of polyhydroxyalkanoates from spent coffee grounds oil obtained by supercritical fluid extraction technology

Spent coffee grounds (SCG) oil was obtained by supercritical carbon dioxide (scCO2) extraction in a pilot plant apparatus, with an oil extraction yield of 90% at a 35kgkg(-1) CO2/SCG ratio. Cupriavidus necator DSM 428 was cultivated in 2L bioreactor using extracted SCG oil as sole carbon source for production of polyhydroxyalkanoates. The culture reached a cell dry weight of 16.7gL(-1) with a polymer content of 78.4% (w/w). The volumetric polymer productivity and oil yield were 4.7gL(-1)day(-1) and 0.77gg(-1), respectively. The polymer produced was a homopolymer of 3-hydroxybutyrate with an average molecular weight of 2.34×10(5) and a polydispersity index of 1.2. The polymer exhibited brittle behaviour, with very low elongation at break (1.3%), tensile strength at break of 16MPa and Youngs Modulus of 1.0GPa. Results show that SCG can be a bioresource for polyhydroxyalkanoates production with interesting properties.

Assessing the abundance and activity of denitrifying polyphosphate accumulating organisms through molecular and chemical techniques

Biological nutrient removal (BNR) plants can reduce both carbon and oxygen requirements by increasing the fraction of phosphorus (P) removed by denitrifying polyphosphate accumulating organisms (DPAOs). Contrasting findings have been reported in literature concerning whether or not PAOs and DPAOs are different microorganisms. In this study, quantitative fluorescence in situ hybridisation (FISH) measurements from different EBPR sludges support the hypothesis that PAOs and DPAOs are phyogenetically different. This experimental evidence is discussed within the context of literature findings and suggestions for future research concerning the identity of PAOs and DPAOs are proposed. Further, this paper discusses the different methodologies available for assessing the DPAO fraction through chemical analytical techniques, where the relative fraction estimated is highly dependent on the methodology employed. Thus, we recommend an alteration to previously proposed methods in order to calculate the DPAO fraction through anaerobic-anoxic and anaerobic-aerobic batch tests. This information is expected to be valuable in studies focussed on optimising the amount of phosphorus removal achieved with simultaneous denitrification.

Kinetics of production and characterization of the fucose-containing exopolysaccharide from Enterobacter A47

A fucose-containing exopolysaccharide (EPS) was produced by the bacterium Enterobacter A47 using glycerol byproduct from the biodiesel industry. The analysis of kinetic data suggested a partially growth associated EPS synthesis model. Although the EPS was composed of fucose, galactose and glucose at all cultivation stages, their relative proportion has varied considerably during the run. At the beginning (24h), glucose was the main component (82.4 wt.%), being fucose and galactose minor components (5.0 wt.% and 10.9 wt.%, respectively), while at the end (96 h) it was composed of 26.0 wt.% fucose, 28.9 wt.% galactose and 43.7 wt.% glucose. The acyl groups content and composition have also changed, reaching their maximum content (19.2wt.%) at the end of the run. Moreover, the molecular weight has increased linearly during the run (from 8×10(5) to 5×10(6)). The changes observed in EPS composition and molecular weight have also had an impact upon the polymers intrinsic viscosity, as shown by its linear increase from 3.95 to 10.72 dL g(-1). The results suggest that the culture might have synthesized at least two distinct EPS, with different sugar composition and average molecular weight, which predominated at different cultivation stages.

Robustness of sludge enriched with short SBR cycles for biological nutrient removal.

In this study, it is proposed that short sequencing batch reactor (SBR) cycles select and maintain a robust and active biomass, able to cope with typical disturbances occurring in wastewater treatment plants. In order to test this hypothesis, an SBR system was subjected to COD, N and P shock loads. It was shown that the sludge enriched in the SBR operated with short cycles was able to rapidly recover from the tested disturbances. COD and N removal recovered within 1-2 days for shock loads of 10 times the standard concentration. The P removal took up to 2-3 sludge ages to fully recover from the COD spike, but the enhanced biological phosphorus removal (EBPR) performance was still able to be totally re-established after each of the tests, even in theoretically adverse conditions for the growth of polyphosphate accumulating organisms.

Development and characterization of bilayer films of FucoPol and chitosan

Bilayer films of FucoPol and chitosan were prepared and characterized in terms of optical, morphologic, hygroscopic, mechanical and barrier properties, to evaluate their potential application in food packaging. Bilayer films have shown dense and homogeneous layers, and presented enhanced properties when comparing to monolayer FucoPol films. Though, a high swelling degree in contact with liquid water (263.3%) and a high water vapour permeability (0.75×10(-11)mol/msPa), typical of polysaccharide films, was still observed. However, they presented a low permeability to O2 and CO2 (0.47×10(-16)molm/m(2)sPa and 5.8×10(-16)molm/m(2)sPa, respectively). Tensile tests revealed a flexible and resistant film with an elongation at break of 38% and an elastic modulus of 137MPa. The studied properties, in particular the excellent barrier to gases, impart these bilayer films potential to be used in packaging of low moisture content products, as well as in multilayered hydrophobic/hydrophilic/hydrophobic barriers for food products with a broader range of water content.

Online monitoring of P(3HB) produced from used cooking oil with near-infrared spectroscopy.

Online monitoring process for the production of polyhydroxyalkanoates (PHA), using cooking oil (UCO) as the sole carbon source and Cupriavidus necator, was developed. A batch reactor was operated and hydroxybutyrate homopolymer was obtained. The biomass reached a maximum concentration of 11.6±1.7gL(-1) with a polymer content of 63±10.7% (w/w). The yield of product on substrate was 0.77±0.04gg(-1). Near-infrared (NIR) spectroscopy was used for online monitoring of the fermentation, using a transflectance probe. Partial least squares regression was applied to relate NIR spectra with biomass, UCO and PHA concentrations in the broth. The NIR predictions were compared with values obtained by offline reference methods. Prediction errors to these parameters were 1.18, 2.37 and 1.58gL(-1) for biomass, UCO and PHA, respectively, which indicate the suitability of the NIR spectroscopy method for online monitoring and as a method to assist bioreactor control.

Study of the interactive effect of temperature and pH on exopolysaccharide production by Enterobacter A47 using multivariate statistical analysis

Enterobacter A47 synthesizes fucose-containing exopolysaccharides (EPS). Maximum EPS production (>7.00 g L(-1)) was obtained for temperature and pH within 25-35°C and 6.0-8.0, respectively. Under these conditions, the polymers contained over 30% fucose. Glucose, galactose, and glucuronic acid contents were about 28%, 25%, and 10%, respectively, and the total acyl groups content was about 20 wt.%. The average molecular weight (Mw) was around 4.0 × 10(6). Outside the optimal temperature and pH ranges, fucose, galactose and glucuronic acid, and the total acyl group contents were reduced, while the glucose content increased, new monomers (rhamnose and glucosamine) were detected, and the Mw increased to ≥ 1.10 × 10(7). This study revealed the ability of Enterobacter A47 to synthesize different heteropolysaccharides as a function of pH and temperature, a feature that can be exploited to obtain tailored polymer composition. Moreover, the production of high fucose content EPS was stable for wide pH and temperature ranges, which is important for the envisaged industrial development of the bioprocess.