Franca Pavanetto

Bioadhesive Microspheres for Ophthalmic Administration of Acyclovir

The bioavailability of acyclovir to the ophthalmic epithelium is low and when the drug is administered in ophthalmic ointment it must be applied every four hours. An emulsification technique has been used to prepare acyclovir‐loaded chitosan microspheres with the aim of promoting the prolonged release of drug and increasing its ocular bioavailability.

Use of polylactic acid for the preparation of microparticulate drug delivery systems

This report reviews the development of particulate drug delivery systems technology based on polylactic acid (PLA). The following methods used to produce PLA microparticles are considered: emulsion solvent evaporation, emulsion solvent extraction, interfacial phase deposition, spray coating, and the melting method. The different preparation processes and parameters used, the characteristics of microparticles obtained and those parameters affecting the characteristics of these systems, are discussed.

Study on glycolic acid delivery by liposomes and microspheres

Glycolic acid is used in many cosmetic products as exfoliant and moisturizer. Unfortunately, the greater glycolic acid cosmetic benefits the greater is the potential for skin irritation as far as burning. The aim of this work was to investigate the feasibility of topical controlled delivery systems loading glycolic acid in order to optimize the acid cosmetic properties lowering its side effects. For this purpose different types of microparticulate systems have been evaluated: liposomes, liposomes modified by chitosan addition and chitosan microspheres. Liposomes, composed of phosphatidylcholine and cholesterol (1:1 molar ratio) and with different glycolic acid/lipid molar ratio, were prepared by reverse phase evaporation method. Two types of interaction between liposomes and chitosan were investigated: chitosan addition into lipidic bilayer during liposome preparation and coating of already formed liposomes with chitosan. Glycolic acid loaded chitosan microspheres were prepared by the dry-in-oil emulsion method. The microparticulate systems were morphologically characterized by electron microscopy and particle size analysis. In vitro dissolution tests were performed to evaluate the feasibility of microparticulate systems in modulating glycolic acid release. The results obtained show that liposomes are always suitable to modulate glycolic acid release and that the best condition to achieve this control is obtained by the liposomal systems in which glycolic acid/lipid molar ratio is 5:1. Further significant release control is obtained by addition of chitosan into the liposomes, while chitosan microspheres are not able to control glycolic acid release even after crosslinking.

Evaluation of spray drying as a method for polylactide and polylactide-co-glycolide microsphere preparation

Polylactide and polylactide-co-glycolide microspheres containing a lipophilic model drug (vitamin D3) were prepared by spray drying. The purpose of this work is to evaluate the efficacy of spray drying as a method for microsphere preparation. The study was carried out on five different polymers of lactide class: poly-L-lactide 57000 MW, poly-D,L-lactide 209,000 MW, 109,000 MW, 16,000 MW, and polylactide-co-glycolide 22,000 MW. The process conditions were experimentally assessed for each polymer used. The microspheres obtained were characterized for their shape, size and drug content, and the influence of the polymer on microsphere characteristics was evaluated. Results show that polymer type, polymer molecular weight and its concentration in the spraying solution greatly affect microsphere characteristics. In vitro dissolution tests performed with the rotating bottle method resulted in different release profiles depending on type of polymer and on microsphere morphology.

Solvent evaporation, solvent extraction and spray drying for polylactide microsphere preparation

Abstract Polylactide microspheres containing vitamin D 3 (D 3 ) as a model drug were prepared by solvent evaporation, solvent extraction and spray drying. In this work, these three different preparation methods were compared and the extent to which each can affect the properties and characteristics of microspheres was identified. The experimental conditions yielding the best results were chosen within each method. Solvent extraction proved to be the better of the two traditional methods. It resulted in particles that were more regular in shape, smaller, with a narrower size distribution and higher porosity. Spray drying yields results equivalent to those of solvent extraction with the advantage of a higher encapsulation efficiency and shorter duration for the process of preparation. Moreover, the dissolution profile of microspheres prepared by spray drying demonstrated that more gradual release of drug was promoted.

A multiple emulsion method to entrap a lipophilic compound into chitosan microspheres

A new method for preparation of chitosan microspheres loaded with an hydrophobic drug, ketoprofen, was developed. It is an emulsification/solvent evaporation process carried out in mild conditions and particularly useful for microencapsulation of thermally sensitive drugs. This method can be additionally combined to physical and chemical cross-linking in order to modulate drug release. Physical cross-linking was carried out by dry heating chitosan microspheres at fixed temperatures and for different times. Glutaraldehyde at different concentrations was used as the chemical cross-linking agent on microspheres constituted by different theoretical ketoprofen/chitosan ratio (1:2, 1:4, 1:6 w/w). Chitosan microspheres were morphologically characterized for shape, surface characteristics and size distribution; chitosan/ketoprofen interactions inside microspheres were investigated by differential scanning calorimetry and powder X-ray difractometry. Ketoprofen contents inside the microspheres and in vitro drug release profiles were also determined.

Different molecular weight chitosan microspheres : Influence on drug loading and drug release

Influence of chitosan molecular weight on drug loading and drug release of drug-loaded chitosan microspheres was studied. Chitosans of 70,000 (LC), 750,000 (MC), and 2,000,000 (HC) molecular weight were employed alone or as mixtures (HC/LC 1:1-1:2 w/w). Ketoprofen (ket) was chosen as the model drug to be encapsulated. Microspheres characterized by different theoretical polymer/drug ratios were prepared (2:1, 1:1, 1:2 w/w). Satisfactory ket contents were obtained for all batches of chitosan microspheres with the theoretical polymer/drug ratio 1:2 w/w; microspheres made of HC/LC (1:2 w/w) were characterized by good drug content and encapsulation efficiency independent by polymer/drug ratio. Prepared chitosan microparticulate delivery systems can modulate ket release within 48 hr. Microspheres consisting of HC/LC (1:2 w/w) were the most suitable formulation in controlling drug release.

Long-term release of clodronate from biodegradable microspheres.

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1∶16, temperature-raising rate in the solvent evaporation step 1°C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions.

Chitosan glutamate nanoparticles for protein delivery: Development and effect on prolidase stability

Purpose: To evaluate the feasibility of exploiting ultrasonication coupled with ionotropic gelation in order to prepare tripolyphosphate (TPP)-chitosan glutamate nanoparticles suitable for the delivery of the enzyme prolidase. Methods: All the parameters for the preparation of TPP-chitosan nanoparticles in terms of components weight ratio, ultrasonication conditions and time-saving nanoparticles recovery conditions were optimized. The best formulation was loaded with the prolidase. All the nanoparticles were characterized in terms of morphology, size, polydispersity, zeta-potential, yield of the process and encapsulation efficiency. The in-vitro activity of the prolidase was assessed by capillary electrophoresis (CE). Results and conclusions: A TPP to chitosan weight ratio of 0.2:1 combined with one ultrasonication cycle (4 min using the probe-type sonifier at 75% power) obtained well-formed nanoparticles of spherical shape, mean size of ∼ 365 nm (polydispersity index 0.3) and a + 17.94 mV zeta potential. A satisfactory prolidase encapsulation efficiency (43%) was obtained with a yield of the preparation process of ∼55%. In vitro study of activity of prolidase, as free enzyme or released from chitosan nanoparticles, highlighted the ability of chitosan to stabilize the enzyme during all the steps of the preparation process and to modulate the enzyme activity up to 48 h.

Evaluation of process parameters involved in chitosan microsphere preparation by the o/w/o multiple emulsion method

Chitosans are interesting biopolymers largely studied for applications in the medical and pharmaceutical fields. In this work, an o/w/o multiple emulsion technique was used for the preparation of hydrophobic drug loaded microspheres. Moreover, the influence of critical variables (concentration of acetic acid in the polymer solution and drug-polymer ratio) on microsphere morphology and drug content was evaluated. Two chitosans of different molecular weights and deacetylation degree were employed; ketoprofen, a non-steroidal anti- inflammatory drug, was chosen as the hydrophobic model drug. The multiple emulsion method produced well-formed microspheres with good yields. Acetic acid concentration in the polymeric solutions influenced particle size and drug content of the microspheres. The highest drug encapsulation efficiencies were obtained for the lowest theoretical drug/chitosan ratio.