Paola Perugini

Bioadhesive Microspheres for Ophthalmic Administration of Acyclovir

The bioavailability of acyclovir to the ophthalmic epithelium is low and when the drug is administered in ophthalmic ointment it must be applied every four hours. An emulsification technique has been used to prepare acyclovir‐loaded chitosan microspheres with the aim of promoting the prolonged release of drug and increasing its ocular bioavailability.

Study on glycolic acid delivery by liposomes and microspheres

Glycolic acid is used in many cosmetic products as exfoliant and moisturizer. Unfortunately, the greater glycolic acid cosmetic benefits the greater is the potential for skin irritation as far as burning. The aim of this work was to investigate the feasibility of topical controlled delivery systems loading glycolic acid in order to optimize the acid cosmetic properties lowering its side effects. For this purpose different types of microparticulate systems have been evaluated: liposomes, liposomes modified by chitosan addition and chitosan microspheres. Liposomes, composed of phosphatidylcholine and cholesterol (1:1 molar ratio) and with different glycolic acid/lipid molar ratio, were prepared by reverse phase evaporation method. Two types of interaction between liposomes and chitosan were investigated: chitosan addition into lipidic bilayer during liposome preparation and coating of already formed liposomes with chitosan. Glycolic acid loaded chitosan microspheres were prepared by the dry-in-oil emulsion method. The microparticulate systems were morphologically characterized by electron microscopy and particle size analysis. In vitro dissolution tests were performed to evaluate the feasibility of microparticulate systems in modulating glycolic acid release. The results obtained show that liposomes are always suitable to modulate glycolic acid release and that the best condition to achieve this control is obtained by the liposomal systems in which glycolic acid/lipid molar ratio is 5:1. Further significant release control is obtained by addition of chitosan into the liposomes, while chitosan microspheres are not able to control glycolic acid release even after crosslinking.

A multiple emulsion method to entrap a lipophilic compound into chitosan microspheres

A new method for preparation of chitosan microspheres loaded with an hydrophobic drug, ketoprofen, was developed. It is an emulsification/solvent evaporation process carried out in mild conditions and particularly useful for microencapsulation of thermally sensitive drugs. This method can be additionally combined to physical and chemical cross-linking in order to modulate drug release. Physical cross-linking was carried out by dry heating chitosan microspheres at fixed temperatures and for different times. Glutaraldehyde at different concentrations was used as the chemical cross-linking agent on microspheres constituted by different theoretical ketoprofen/chitosan ratio (1:2, 1:4, 1:6 w/w). Chitosan microspheres were morphologically characterized for shape, surface characteristics and size distribution; chitosan/ketoprofen interactions inside microspheres were investigated by differential scanning calorimetry and powder X-ray difractometry. Ketoprofen contents inside the microspheres and in vitro drug release profiles were also determined.

Different molecular weight chitosan microspheres : Influence on drug loading and drug release

Influence of chitosan molecular weight on drug loading and drug release of drug-loaded chitosan microspheres was studied. Chitosans of 70,000 (LC), 750,000 (MC), and 2,000,000 (HC) molecular weight were employed alone or as mixtures (HC/LC 1:1-1:2 w/w). Ketoprofen (ket) was chosen as the model drug to be encapsulated. Microspheres characterized by different theoretical polymer/drug ratios were prepared (2:1, 1:1, 1:2 w/w). Satisfactory ket contents were obtained for all batches of chitosan microspheres with the theoretical polymer/drug ratio 1:2 w/w; microspheres made of HC/LC (1:2 w/w) were characterized by good drug content and encapsulation efficiency independent by polymer/drug ratio. Prepared chitosan microparticulate delivery systems can modulate ket release within 48 hr. Microspheres consisting of HC/LC (1:2 w/w) were the most suitable formulation in controlling drug release.

Long-term release of clodronate from biodegradable microspheres.

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1∶16, temperature-raising rate in the solvent evaporation step 1°C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions.

Chitosan glutamate nanoparticles for protein delivery: Development and effect on prolidase stability

Purpose: To evaluate the feasibility of exploiting ultrasonication coupled with ionotropic gelation in order to prepare tripolyphosphate (TPP)-chitosan glutamate nanoparticles suitable for the delivery of the enzyme prolidase. Methods: All the parameters for the preparation of TPP-chitosan nanoparticles in terms of components weight ratio, ultrasonication conditions and time-saving nanoparticles recovery conditions were optimized. The best formulation was loaded with the prolidase. All the nanoparticles were characterized in terms of morphology, size, polydispersity, zeta-potential, yield of the process and encapsulation efficiency. The in-vitro activity of the prolidase was assessed by capillary electrophoresis (CE). Results and conclusions: A TPP to chitosan weight ratio of 0.2:1 combined with one ultrasonication cycle (4 min using the probe-type sonifier at 75% power) obtained well-formed nanoparticles of spherical shape, mean size of ∼ 365 nm (polydispersity index 0.3) and a + 17.94 mV zeta potential. A satisfactory prolidase encapsulation efficiency (43%) was obtained with a yield of the preparation process of ∼55%. In vitro study of activity of prolidase, as free enzyme or released from chitosan nanoparticles, highlighted the ability of chitosan to stabilize the enzyme during all the steps of the preparation process and to modulate the enzyme activity up to 48 h.

Evaluation of process parameters involved in chitosan microsphere preparation by the o/w/o multiple emulsion method

Chitosans are interesting biopolymers largely studied for applications in the medical and pharmaceutical fields. In this work, an o/w/o multiple emulsion technique was used for the preparation of hydrophobic drug loaded microspheres. Moreover, the influence of critical variables (concentration of acetic acid in the polymer solution and drug-polymer ratio) on microsphere morphology and drug content was evaluated. Two chitosans of different molecular weights and deacetylation degree were employed; ketoprofen, a non-steroidal anti- inflammatory drug, was chosen as the hydrophobic model drug. The multiple emulsion method produced well-formed microspheres with good yields. Acetic acid concentration in the polymeric solutions influenced particle size and drug content of the microspheres. The highest drug encapsulation efficiencies were obtained for the lowest theoretical drug/chitosan ratio.

Ex vivo evaluation of prolidase loaded chitosan nanoparticles for the enzyme replacement therapy

Prolidase loaded chitosan nanoparticles were set up in order to suggest an innovative therapeutic approach for Prolidase Deficiency (PD), a rare autosomal inherited disorder of the connective tissue. The satisfactory drug loading efficiency (42.6+/-2.1%) as well as the suitable physical characteristics (mean diameter of 365.5+/-35.1 nm and a positive zeta-potential of 17.94+/-0.12 mV) was achieved. In order to verify the compatibility of the chitosan nanoparticles with cells, the influence of the nanoparticles on the growth and the viability (MTT assay) of cultured skin fibroblasts were determined: the nanoparticles showed a good biocompatibility up to 5 microg of chitosan/10,000 fibroblasts. Uptake of chitosan nanoparticles by fibroblasts was verified by confocal microscopy using FITC-labelled chitosan nanoparticles. The ex vivo experiments were performed by incubating different amounts of prolidase loaded chitosan nanoparticles with skin human fibroblasts from PD patients for scheduled times. The restored prolidase activity was quantitatively monitored by a capillary electrophoretic method and confirmed by cells morphological observations. Standing from the nanoparticles internalization, the enzymatic activity was progressively restored reaching the best value (about 66%) after 5 days of co-incubation. Moreover, prolidase loaded chitosan nanoparticles permitted to restore prolidase activity in PD fibroblasts for a prolonged period of time (8 days).

Preparation and in vitro evaluation of thiolated chitosan microparticles

The objective of this study was to prepare a microparticulate drug delivery system being based on a new thiomer, namely a chitosan 2-iminothiolane conjugate (chitosan-TBA conjugate). Due to thiol groups being immobilized on chitosan, chitosan-TBA conjugate exhibits improved mucoadhesive and permeation enhancing properties. Because of these features microparticulate drug delivery systems based on chitosan-TBA conjugate might be a promising tool for the non-invasive administration of hydrophilic macromolecular drugs. Chitosan-TBA conjugate microspheres were prepared by the emulsification/solvent evaporation method. Fluorescein-isothiocyanate labelled dextran (FITC-dextran) was chosen as a model hydrophilic drug. Microspheres have been characterized by morphological analysis, thiol group content, swelling behaviour, polymer degradation drug load determination, dissolution test and mucoadhesion studies. Results reported in this work demonstrated the possibility to obtain stable microspheres without cross-linking agents. Thiolated chitosan microspheres seem to be more stable in aqueous media with respect to unmodified chitosan. The degradability by lysozyme appears quite similar for both polymers, showing that chemical modification does not influence the biodegradable properties of chitosan. Microspheres were able to control the drug release for at least 1 h, exhibiting comparatively strong mucoadhesive properties. The chitosan-TBA conjugate microparticles remain on the mucosa in a 2.5-fold higher concentration with respect to unmodified chitosan microparticles. These data suggest that chitosan-TBA conjugate microspheres have the potential to be used as a mucoadhesive drug delivery system.

Poly(D,L-lactide) nanoencapsulation to reduce photoinactivation of a sunscreen agent

The use of sunscreens is the ‘gold standard’ for protecting the skin from ultraviolet light. Octyl methoxycinnamate (OMC) is one of the most widely used UVB filter but it can act as a sensitizer or photoallergen. When exposed to sunlight, OMC can change from the primary trans‐form to cis‐form and the isomerization, not reversible, conducts to a reduction of the UVB filtering efficiency because the trans‐form has a higher extinction coefficient. Photostability is the most important characteristic of effective sunscreens and it can be influenced by formulation ingredients and by applying technological strategies. In this work, photostability experiments, performed on emulsion–gels containing different percentages of OMC free or loaded in poly(d,l‐lactide) nanoparticles, were carried out. The presence of a polymeric envelop may act to protect the active ingredient. In this study, the influence of poly(d,l‐lactide) matrices on the photochemical stability of the sunscreen agent was investigated. As highlighted in this study, free OMC in different formulations has different photoisomerization degree. Moreover, a dissimilar behaviour was observed by studying different sunscreen concentrations in the same cosmetic formulation. Photostability results show a significant reduction in photoisomerization degree for formulations containing sunscreen loaded in nanoparticles, highlighting that the encapsulation is a suitable strategy to improve OMC photostability. Moreover, sun protection factor (SPF) results show that the UVB filter protective power is also maintained after encapsulation.