Francesco Carlà

Nanopatterned Ag substrates for SERS spectroscopy.

Nanopatterned silver substrates with highly reproducible morphologies have been fabricated by micro-contact printing techniques and tested for SERS activity.

Structure and Nanomechanics of Model Membranes by Atomic Force Microscopy and Spectroscopy: Insights into the Role of Cholesterol and Sphingolipids

Biological membranes mediate several biological processes that are directly associated with their physical properties but sometimes difficult to evaluate. Supported lipid bilayers (SLBs) are model systems widely used to characterize the structure of biological membranes. Cholesterol (Chol) plays an essential role in the modulation of membrane physical properties. It directly influences the order and mechanical stability of the lipid bilayers, and it is known to laterally segregate in rafts in the outer leaflet of the membrane together with sphingolipids (SLs). Atomic force microscope (AFM) is a powerful tool as it is capable to sense and apply forces with high accuracy, with distance and force resolution at the nanoscale, and in a controlled environment. AFM-based force spectroscopy (AFM-FS) has become a crucial technique to study the nanomechanical stability of SLBs by controlling the liquid media and the temperature variations. In this contribution, we review recent AFM and AFM-FS studies on the effect of Chol on the morphology and mechanical properties of model SLBs, including complex bilayers containing SLs. We also introduce a promising combination of AFM and X-ray (XR) techniques that allows for in situ characterization of dynamic processes, providing structural, morphological, and nanomechanical information.

Custom AFM for X-ray beamlines: in situ biological investigations under physiological conditions

The performance of a custom atomic force microscope for grazing-incidence X-ray experiments on hydrated soft and biological samples is presented.

Structural Reorganization of Pt(111) Electrodes by Electrochemical Oxidation and Reduction

The surface restructuring of Pt(111) electrodes upon electrochemical oxidation/reduction in 0.1 M HClO4 was studied by in situ grazing-incidence small-angle X-ray scattering and complementary scanning tunneling microscopy measurements. These methods allow quantitative determination of the formation and structural evolution of nanoscale Pt islands during potential cycles into the oxidation region. A characteristic ripening behavior is observed, where these islands become more prominent and homogeneous in size with increasing number of cycles. Their characteristic lateral dimensions primarily depend on the upper potential limit of the cycle and only slightly increase with cycle number. The structural evolution of the Pt surface morphology strongly resembles that found in studies of Pt(111) homoepitaxial growth and ion erosion in ultrahigh vacuum. It can be fully explained by a microscopic model based on the known surface dynamic behavior under vacuum conditions, indicating that the same dynamics also describe the structural evolution of Pt in the electrochemical environment.

Electrochemical characterization of core@shell CoFe2O4/Au composite

In this paper, we address the synthesis and characterization of the core@shell composite magneto-plasmonic cobalt ferrite–gold (Co-ferrite/Au) nanosystem. The synthesis Co-ferrite/Au nanocomposite is not obvious, hence it was of interest to generate it in a simple straightforward method. Co-ferrite/Au nanocomposite was generated by synthesizing first by thermal decomposition Co-ferrite nanoparticles (NPs). On a second step, ionic gold (Au3+) was reduced at the surface of Co-ferrite NPs by ultrasound, to obtain the metallic Au shell. The characterization of the nanomaterial was achieved by microscopy, spectroscopy, and performing magnetic measurements. However, what is attractive about our work is the use of electrochemical techniques as analytical tools. The key technique was cyclic voltammetry, which provided information about the nature and structure of the nanocomposite, allowing us to confirm the core@shell structure.

Operando SXRD study of the structure and growth process of Cu2S ultra-thin films

Electrochemical Atomic Layer Deposition (E-ALD) technique has demonstrated to be a suitable process for growing compound semiconductors, by alternating the under-potential deposition (UPD) of the metallic element with the UPD of the non-metallic element. The cycle can be repeated several times to build up films with sub-micrometric thickness. We show that it is possible to grow, by E-ALD, Cu2S ultra-thin films on Ag(111) with high structural quality. They show a well ordered layered crystal structure made on alternating pseudohexagonal layers in lower coordination. As reported in literature for minerals in the Cu-S compositional field, these are based on CuS3 triangular groups, with layers occupied by highly mobile Cu ions. This structural model is closely related to the one of the low chalcocite. The domain size of such films is more than 1000 Å in lateral size and extends with a high crystallinity in the vertical growth direction up to more than 10 nm. E-ALD process results in the growth of highly ordered and almost unstrained ultra-thin films. This growth can lead to the design of semiconductors with optimal transport proprieties by an appropriate doping of the intra metallic layer. The present study enables E-ALD as an efficient synthetic route for the growth of semiconducting heterostructures with tailored properties.

In situ anodization of aluminum surfaces studied by x-ray reflectivity and electrochemical impedance spectroscopy

We present results from the anodization of an aluminum single crystal [Al(111)] and an aluminum alloy [Al 6060] studied by in situ x-ray reflectivity, in situ electrochemical impedance spectroscopy and ex situ scanning electron microscopy. For both samples, a linear increase of oxide film thickness with increasing anodization voltage was found. However, the slope is much higher in the single crystal case, and the break-up of the oxide film grown on the alloy occurs at a lower anodization potential than on the single crystal. The reasons for these observations are discussed as are the measured differences observed for x-ray reflectivity and electrochemical impedance spectroscopy.

In situ scanning tunneling microscopy investigation of sulfur oxidative underpotential deposition on Ag(100) and Ag(110).

Underpotential (UPD) deposition of sulfur from Na(2)S solution in 0.1 M NaOH was studied on Ag(100) and Ag(110) using in situ scanning tunneling microscopy (STM). The cyclic voltammogram on Ag(100) presents two broad peaks, whereas three partial overlapping peaks and a sharper one are observed on Ag(110). STM measurements carried out during the whole UPD process show that progressively more compact structures are formed as the applied potential is scanned toward more positive potentials. More precisely, p(2×2), c(2×6), and c(2×2) were found on Ag(100) at E = -1.25, -1.0, and -0.9 V, respectively. Less definite conclusions can be drawn for the structures of S overlayers on Ag(110). However, the experimental findings are consistent with an incomplete p(2×1) at potentials preceding the sharp peak, and with a c(2×2) structure at E = -0.9 V vs Ag/AgCl, KCl(sat). The coverage values calculated on the basis of the hypothesized structures have been compared with the values obtained from chronocoulometric measurements at the most positive potentials investigated. Thus, the experimental coverage θ = 0.5 coincides with the coverage calculated for the c(2×2) structure found on Ag(110) at E = -0.9 V by STM, whereas the experimental coverage θ = 0.42 suggests that a mixture of structures c(2×6) and c(2×2) is formed on Ag(100).

Oxidation of CO on Pd(1 0 0): on the structural evolution of the PdO layer during the self sustained oscillation regime

Abstract Under particular temperature and gas conditions the reactivity of the Pd(1 0 0) surface toward CO oxidation exhibits oscillatory behaviour. Here we examine the surface structure of this model catalyst and show that the periodic pattern is more complex than previously reported and that superimposed on the overall oscillation much faster structural variations are present. By examining the structure of the sample surface at high temporal resolution we conclude that the structure of the oxide layer present at the surface evolves continuously toward a more disordered phase in agreement with the Mars-Van Krevelen reaction mechanism.

Combined scanning probe microscopy and x-ray scattering instrument for in situ catalysis investigations

We have developed a new instrument combining a scanning probe microscope (SPM) and an X-ray scattering platform for ambient-pressure catalysis studies. The two instruments are integrated with a flow reactor and an ultra-high vacuum system that can be mounted easily on the diffractometer at a synchrotron end station. This makes it possible to perform SPM and X-ray scattering experiments in the same instrument under identical conditions that are relevant for catalysis.