Francesco Lai

Niosomes as carriers for tretinoin II. Influence of vesicular incorporation on tretinoin photostability

In this work, we compared the chemical stability of tretinoin (TRA) in methanol and in vesicular suspensions exposed both to UV and artificial daylight conditions with the aim of evaluating the potential of niosomes as topical carriers capable of improving the stability of photosensitive drugs. Tretinoin-loaded niosomes were prepared from polyoxyethylene (4) lauryl ether (Brij 30), sorbitan esters (Span 40 and Span 60) and a commercial mixture of octyl/decyl polyglucosides (Triton CG110). Liposomes made from hydrogenated (P90H) and non-hydrogenated (P90) soy phosphatidylcholines were also prepared and studied. In order to evaluate the influence of vesicle structure on the photostability of tretinoin, TRA-loaded vesicles were prepared by the film hydration method, extrusion technique and sonication. After UV irradiation, TRA dissolved in methanol degraded very quickly while the incorporation in vesicles always led to a reduction of the photodegradation process. The photoprotection offered by vesicles varied depending on the vesicle structure and composition. After fluorescent light irradiation for 21 days, not all the studied vesicular formulations improved TRA stability when compared with the free drug in methanol. Tretinoin incorporated in P90 or Span vesicles presented a half-life shorter or very close to that of the free drug. However, the inclusion of TRA in P90H liposomes and Brij 30 or Triton CG110 niosomes retarded the drug photodegradation.

Diclofenac nanosuspensions: influence of preparation procedure and crystal form on drug dissolution behaviour.

The aim of this paper was to ascertain the role of drug crystalline form and preparation procedure in nanosuspension formulations in order to optimise dissolution properties of lipophilic, poorly soluble drugs, thus improving their oral bioavailability. The non-steroidal anti-inflammatory drug diclofenac acid (DCF), which is known to exist in different crystal forms, was chosen as a model drug. To this purpose, the influence of homogenization technique was studied by preparing several nanosuspensions with two different crystalline forms of the drug (DCF1 and DCF2). Particle size and size distribution, morphology, microstructure, and thermal behaviour of the different formulations were studied by photon correlation spectroscopy (PCS), scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC). Solubility studies of the bulk drug crystalline forms and dissolution experiments of nanosuspensions in comparison with different controls (bulk drug, physical mixtures, coarse suspensions) were carried out in different media: distilled water, simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). Besides well known factors capable of affecting drug nanoparticle dissolution, results showed that drug dissolution rate in nanosuspensions is strongly affected by the drug solubility, which depends on the crystal form, and preparation procedure (high pressure homogenization process). Results demonstrated that this process partially transformed DCF2 in DCF1 while it did not have any effect on the DCF1 crystals.

Nanocarriers for antioxidant resveratrol: formulation approach, vesicle self-assembly and stability evaluation.

In this work we studied various nanoformulations of resveratrol in phospholipid vesicles. Conventional phophatidylcholine liposomes were prepared and characterized in parallel with PEVs (Penetration Enhancer-containing Vesicles) obtained by adding one of eight selected amphiphilic penetration enhancers (PEs; 0.2% w/v; HLB range 1-16) to the composition. All vesicles were around 100 nm, negatively charged (∼-30 mV) and able to incorporate resveratrol in good yields (>74%). The structure and the lamellar self-organization of the vesicles were investigated by Transmission Electron Microscopy (TEM) and Small and Wide Angle X-ray Scattering (SWAXS). These analyses showed that the lamellarity of the vesicles depended on the formulation composition. This work also addressed the stability of our colloidal dispersions, which was measured by means of the analytical centrifuge LUMiSizer(®): this procedure disclosed the absence of any demixing phenomena and estimated a 3- to 6-month shelf-life. Moreover, the antioxidant activity of resveratrol was determined by assessing its ability to scavenge free radicals (DPPH assay), and showed that it was not affected by the vesicular formulation.

Glycerosomes: A new tool for effective dermal and transdermal drug delivery

This work describes glycerosomes, vesicles composed of phospholipids, glycerol, and water, as novel vesicular carriers for (trans)dermal drug delivery. In this work, glycerosomes were prepared by hydrating dipalmitoylglycerophosphatidylcholine-cholesterol films with glycerol aqueous solutions (10-30%, v/v). The model drug was diclofenac sodium salt and conventional liposomes were used as control. Prepared formulations were characterized in terms of size distribution, morphology, zeta potential, and vesicle deformability. Glycerosomes and liposomes were oligo/multilamellar vesicles, spherical in shape with a mean diameter ranging between 81 and 97 nm and a fairly narrow distribution (P.I.=0.14-0.19), negative zeta potential values (from -35 to -48) and drug loading capacity between 64 and 73%. Deformability index of both conventional liposomes and glycerosomes showed that glycerol is able to act as edge activator for dipalmitoylglycerophosphatidylcholine bilayers when used in concentration higher than 10%. DSC studies suggested that glycerosomes are in a more fluid state than conventional liposomes. In vitro transdermal delivery experiments showed an improved skin deposition and permeation of diclofenac when 20 and 30% glycerosomes were used. MTT test demonstrated that glycerosomes were able to reduce the in vitro drug toxicity versus keratinocytes.

Liposomes for brain delivery

Introduction: Development of drug delivery systems for brain delivery is one of the most challenging research topics in pharmaceutical areas, mainly due to the presence of the blood–brain barrier (BBB), which separates the blood from the cerebral parenchyma thus limiting the brain uptake of the majority of therapeutic agents. Among the several carriers, which have been studied to overcome this problem, liposomes have gained increasing attention as promising strategies for brain-targeted drug delivery. The most advantageous features of liposomes are their ability to incorporate and deliver large amounts of drug and the possibility to decorate their surface with different ligands. Areas covered: The purpose of this review is to explore the different approaches studied to transport and deliver therapeutics and imaging agents to the brain by using liposomes. In the first part of the review, particular attention is paid to describe the anatomy of the BBB and different physiological transport mechanisms available for drug permeation. In the second part, the different strategies for the delivery of a drug to the brain using liposomes are reviewed for each transport mechanism. Expert opinion: Over the last decade, there have been significant developments concerning liposomal brain delivery systems conjugated with selected ligands with high specificity and low immunogenicity. An universally useful liposomal formulation for brain targeting does not exist but liposome design must be modulated by the appropriate choice of the specific homing device and transport mechanism.

Rifampicin-loaded liposomes for the passive targeting to alveolar macrophages: in vitro and in vivo evaluation.

Mycobacterium avium complex (MAC), the most frequent cause of opportunistic nontuberculous pulmonary infection, is made up of a group of intracellular pathogens that are able to survive and multiply inside lung alveolar macrophages. As nebulized liposomes are reported to be effective to target antibacterial agents to macrophages, in this work we have prepared and characterized re-dispersible freeze-dried rifampicin (RFP)-loaded vesicles by using soy lecithin (SL) and a commercial, enriched mixture of soy phosphatidylcholine (Phospholipon 90, P90) with or without cholesterol. The obtained results showed that RFP could be loaded stably in SL vesicles only when cholesterol was not present in the film preparation, whereas with P90 vesicles, the highest stability was obtained with formulations prepared with P90/cholesterol 7:1 or 4:1 molar ratios. RFP-liposome aerosols were generated using an efficient high-output continuous-flow nebulizer, driven by a compressor. After the experiments, nebulization efficiency (NE%) and nebulization efficiency of the encapsulated drug (NEED%) were evaluated. The results of our study indicated that nebulization properties and viscosity of formulations prepared with the low-transition-temperature phospholipids, SL and P90, are affected by vesicle composition. However, all formulations showed a good stability during nebulization and they were able to retain more than 65% of the incorporated drug. The effect of liposome encapsulation on lung levels of RFP following aerosol inhalation was determined in rats. The in vitro intracellular activity of RFP-loaded liposomes against MAC residing in macrophage-like J774 cells was also evaluated. Results indicated that liposomes are able to inhibit the growth of MAC in infected macrophages and to reach the lower airways in rats.

Liposomes Coated with Chitosan-Xanthan Gum (Chitosomes) as Potential Carriers for Pulmonary Delivery of Rifampicin

The aim of this work was to develop new microparticles for drug delivery to lungs by coating liposomes with chitosan (CH)-xanthan gum (XG) polyelectrolyte complexes to obtain chitosomes. To this purpose, two groups of liposomes were prepared using a mixture of soy phosphatidylcholine and hydrogenated soy phosphatidylcholine in two different concentrations to evaluate their capability to entrap appropriate amounts of the model drug rifampicin. The obtained vesicles were then coated with different CH-XG weight ratios and liposomes and chitosomes were characterized in terms of morphology, size, size distribution, zeta potential, drug entrapment, and rheological properties. The efficiency of chitosomes and liposomes during nebulization was also studied. Results of this study indicated that nebulization and rheological properties of chitosomes are affected by the CH-XG weight ratio. In particular, CH-XG 1:0.5 (w/w) coating was able to greatly improve drug total mass output and drug deposition in the lower stages of the impinger.

Nanosuspension improves tretinoin photostability and delivery to the skin.

The aims of this work were to improve cutaneous targeting and photostability of tretinoin by using nanosuspension formulation. Tretinoin is a drug widely used in the topical treatment of various dermatological diseases. The tretinoin nanosuspension was prepared by precipitation method and then characterized by photo correlation spectroscopy for mean size and size distribution, and by transmission electron microscopy for morphological studies. An oil in water tretinoin nanoemulsion was also prepared and used as a control. Dermal and transdermal delivery of both tretinoin nanosuspension and nanoemulsion were tested in vitro by using Franz diffusion cells and newborn pig skin. Photodegradation studies were carried out by UV irradiation (1h, λ=366 nm) of the tretinoin nanosuspension in comparison with the nanoemulsion and a methanolic solution of the drug. During 8h percutaneous experiments, the nanosuspesion was able to localize the drug into the pig skin with a very low transdermal drug delivery, whereas the nanoemulsion greatly improved drug permeation. UV irradiation of the nanosuspension showed a great improvement of tretinoin stability in comparison with both controls. Overall results show that nanosuspension might be a useful formulation for improving tretinoin dermal delivery and stability.

Maltodextrin fast dissolving films for quercetin nanocrystal delivery. A feasibility study

The objective of this study was to evaluate the feasibility to prepare fast dissolving films as quercetin nanocrystal delivery systems, using maltodextrins as film forming material and glycerin as plasticizer, with the goal of enhancing quercetin oral bioavailability. Quercetin nanosuspensions were prepared using a high-pressure homogenizer, and then directly used to prepare the films by a casting method. Spectroscopic and calorimetric analysis evidenced that reduction of quercetin size at nanoscale and incorporation in maltodextrin films do not affect the solid state of the active ingredient. The loading of quercetin nanocrystals into the film determined a slight variation of film elasticity and ductility. Indeed, the elastic modulus of the loaded films resulted about a half of the placebo ones, while the elongation at break increased four folds. Free and film loaded quercetin nanocrystals showed a comparable dissolution rate, much higher than that of bulk quercetin.

Formulation strategy and evaluation of nanocrystal piroxicam orally disintegrating tablets manufacturing by freeze-drying.

Piroxicam (PRX) is a non-steroidal anti-inflammatory drug characterized by a poor water solubility and consequently by a low oral bioavailability. In this work, different nanocrystal orally disintegrating tablets (ODT) were prepared to enhance piroxicam dissolution rate and saturation solubility. PRX nanocrystals were prepared by means of high pressure homogenization technique using poloxamer 188 as stabilizer. Three different ODTs were prepared with the same nanosuspension using different excipients in order to study their effect on the PRX dissolution properties. PRX nanocrystal size and zeta potential were determined by photon correlation spectroscopy. Additional characterization of PRX nanocrystal ODT was carried out by infrared spectroscopy, X-ray powder diffractometry, differential scanning calorimetry. Dissolution study was performed in distilled water (pH 5.5) and compared with PRX coarse suspension ODT, PRX/poloxamer 188 physical mixture, bulk PRX samples and a PRX commercial ODT. All PRX nanocrystal ODT formulations showed a higher drug dissolution rate than coarse PRX ODT. PRX nanocrystal ODT prepared using gelatin or croscarmellose as excipient showed a higher PRX dissolution rate compared with the commercial formulation and ODT prepared using xanthan gum. Overall results confirmed that improved PRX dissolution rate is due to the increased surface-to-volume ratio due to the nanosized drug particle but also revealed the important role of different excipients used.