Francesco Sabatini

Laboratory and outdoor assessment of UV protection offered by flax and hemp fabrics dyed with natural dyes.

The safest protection from UV radiation (UVR) exposure is offered by clothing and its protectiveness depends on fabric composition (natural, artificial or synthetic fibers), fabric parameters (porosity, weight and thickness) and dyeing (natural or synthetic dyes, dye concentration, UV absorbing properties, etc.). In this study the UV protection properties of two fabrics made of natural fibers (flax and hemp) dyed with some of the most common natural dyes were investigated. UVR transmittance of fabrics was measured by two methods: one based on the utilization of a spectrophotometer equipped with an integrating sphere (in vitro test), and the other based on outdoor measurements taken by a spectroradiometer. Transmittance measurements were used to calculate the ultraviolet protection factor (UPF). Experimental results revealed that natural dyes could confer good UV protection, depending mainly on their different UVR‐absorbing properties, provided that the fabric construction already guaranteed good cover. An increase in cover factor caused by the dyeing process was also detected. Weld‐dyed fabrics gave the highest protection level. The comparison between the two methods applied to measure fabric transmittance pointed out that the UPFs calculated by in vitro measurements were generally lower than those based on outdoor data, indicating an underestimation of the actual protection level of tested fabrics assessed by the in vitro test.

CrossVit: enhancing canopy monitoring management practices in viticulture.

A new wireless sensor network (WSN), called CrossVit, and based on MEMSIC products, has been tested for two growing seasons in two vineyards in Italy. The aims are to evaluate the monitoring performances of the new WSN directly in the vineyard and collect air temperature, air humidity and solar radiation data to support vineyard management practices. The WSN consists of various levels: the Master/Gateway level coordinates the WSN and performs data aggregation; the Farm/Server level takes care of storing data on a server, data processing and graphic rendering; Nodes level is based on a network of peripheral nodes consisting of a MDA300 sensor board and Iris module and equipped with thermistors for air temperature, photodiodes for global and diffuse solar radiation, and an HTM2500LF sensor for relative humidity. The communication levels are: WSN links between gateways and sensor nodes by ZigBee, and long-range GSM/GPRS links between gateways and the server farm level. The system was able to monitor the agrometeorological parameters in the vineyard: solar radiation, air temperature and air humidity, detecting the differences between the canopy treatments applied. The performance of CrossVit, in terms of monitoring and reliability of the system, have been evaluated considering: its handiness, cost-effective, non-invasive dimensions and low power consumption.

UV hazard on Italian Apennines under different shading and ground cover conditions during peak tourist seasons of the year

Abstract In solar UV irradiance monitoring and forecasting services UV information is generally expressed in terms of its effect on erythema and referred to horizontal surface. In this work we define the UV radiative regime, in terms of biologically effective UV irradiance (UVBE) for skin and eye, under full sun and shaded conditions, over a mountainous tourist area of central Italy by means of two all-day measurements (summer and early spring) with different ground albedo (grass and snow cover respectively). UV irradiance was monitored on tilted surfaces (the most frequent for people standing and walking). Results show the significant contribution of ground albedo and sun position in determining the incident UVBE irradiance. On early spring days the UVBE irradiance measured on horizontal surface was much lower than on tilted ones; the opposite condition was observed in summer. The highest UVBE irradiance values, in particular conditions of sun elevation and ground cover, were reached in periods different from the summer both in full sun and shaded condition.

Setting up and Managing Automatic Weather Stations for Remote Sites Monitoring: From Niger to Nepal

Surface weather observations are widely expanding for multiple reasons: availability of new technologies, enhanced data transmission features, transition from manual to automatic equipment, early warning for critical climate risks. One of the main objective is to rehabilitate/increase the density of existing network, by providing data from new sites and from sites that are difficult to access and inhospitable. Despite the increasing number of AWS’s deployed, many remote sites are still not covered by surface observations. The goal is to improve AWS network planning, especially in regions where the scarcity of local trained personnel and funding availability to manage the instrumentation are relevant issues. Some consultancies performed in the past aimed to support, remotely and/or locally, National weather services, Public agencies, Local authorities and International organizations in defining and evaluating AWS’s siting and selection. The efficacy of the results mainly depends on the accurate choice of the sites of installation (network plan), on the correct selection and description of instrumentation type to prepare the international tenders, on the training process to improve the AWS’s management efficiency. The present chapter would discuss some of the main issues arisen from the experience gained during the institutional activities and consultancies in international projects.