Francesco Sannicolò

Melamine Acoustic Chemosensor Based on Molecularly Imprinted Polymer Film

A melamine piezomicrogravimetric (acoustic) chemosensor using a molecularly imprinted polymer (MIP) film has been devised and tested. The MIP films were prepared by electropolymerization of the melamine complexed by the functional monomer of the bis(bithiophene) derivative bearing an 18-crown-6 substituent 4. The structure of the MIP-melamine complex was visualized by the DFT B3LYP/3-21G(*) energy optimization calculations. The sensitivity and selectivity of the MIP film was improved by cross-linking the polymer with the bithianaphthene monomer 5 and the presence of the porogenic ionic liquid in the prepolymerization solution. After electropolymerization, the melamine template was extracted from the MIP film with an aqueous strong base solution. The measurements of UV-vis spectroscopy, X-ray photoelectron spectroscopy (XPS), DPV, and EIS as well as scanning electrochemical microscopy (SECM) imaging confirmed extraction of the melamine template from the MIP film and then rebinding of the melamine analyte while the film relative roughness and porosity was determined by atomic force microscopy (AFM) and scanning electron microscopy (SEM) imaging, respectively. The analytical as well as kinetic and thermodynamic parameters of the chemosensing were assessed under flow-injection analysis (FIA) conditions with piezoelectric microgravimetry (PM) detection. The linear concentration range for melamine detection was 5 nM to at least 1 mM with a limit of detection of approximately 5 nM. The chemosensor successfully discriminated the cyanuric acid, cyromazine, and ammeline interfering agents.

Inherently Chiral Macrocyclic Oligothiophenes: Easily Accessible Electrosensitive Cavities with Outstanding Enantioselection Performances

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain-end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an “inherently chiral” sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability.

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphanes

A series of tris-aryl phosphanes, structurally designed to exist as residual enantiomers or diastereoisomers, bearing substituents differing in size and electronic properties on the aryl rings, were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation potential determined by voltammetry. The configurational stability of residual phosphanes, evaluated by dynamic HPLC on a chiral stationary phase or/and by dynamic (1)H and (31)P NMR spectroscopy, was found to be rather modest (barriers of about 18-20 kcal mol(-1)), much lower than that shown by the corresponding phosphane oxides (barriers of about 25-29 kcal mol(-1)). For the first time, the residual antipodes of a tris-aryl phosphane were isolated in enantiopure state and the absolute configuration assigned to them by single-crystal anomalous X-ray diffraction analysis. In this case, the racemization barrier could be calculated also by CD signal decay kinetics. A detailed computational investigation was carried out to clarify the helix reversal mechanism. Calculations indicated that the low configurational stability of tris-aryl phosphanes can be attributed to an unexpectedly easy phosphorus pyramidal inversion which, depending upon the substituents present on the blades, can occur even on the most stable of the four conformers constituting a single residual stereoisomer.

Chirality in the Absence of Rigid Stereogenic Elements: The Absolute Configuration of Residual Enantiomers of C3-Symmetric Propellers

Two new tris(aryl)phosphane oxides existing as configurationally stable residual enantiomers have been synthesised and their racemates resolved by semipreparative HPLC on a chiral stationary phase (CSP HPLC). One of them, recognised as a conglomerate, could be resolved by fractional crystallisation at a preparative scale level. In this case, the absolute configuration of the propeller-shaped molecule was determined by anomalous X-ray scattering. The problem of the correlative assignment of the absolute configuration to all known C(3)-symmetric three-bladed propeller-shaped molecules existing as stable residual enantiomers is discussed. The configurational stability of the new chiral phosphane oxides and of the corresponding phosphanes was evaluated by CD signal decay kinetics and dynamic (1)H NMR spectroscopy. The racemisation barriers in phosphanes were found about 10 kcal mol(-1) lower than those found for the corresponding oxides, though geometry and inter-ring gearing would be very similar in the two series. Configurational stability of residual tris(aryl)phosphanes was found to be influenced by the electronic availability of the phosphorus centre, as evaluated by electrochemical CV experiments.

Chirality in the absence of rigid stereogenic elements: the design of configurationally stable C3-symmetric propellers.

Residual stereoisomerism is a form of stereoisomerism scarcely considered so far for applicative purposes, though extremely interesting, since the production of stereoisomers does not involve classical rigid stereogenic elements. In three-bladed propeller-shaped molecules, a preferred stereomerization mechanism, related to the correlated rotation of the rings, allows the free interconversion of stereoisomers inside separated sets (the residual stereoisomers) that can interconvert through higher energy pathways. In light of possible future applications as chiral ligands for transition metals in stereoselective processes, some C(3)-symmetric phosphorus-centered propellers, which could exist as residual enantiomers, are synthesized and the possibility of resolving their racemates into residual antipodes is explored. While the tris(aryl)methanes are configurationally stable at room temperature, only selected tris(aryl)phosphane oxides display a configurational stability high enough to allow resolution by HPLC on a chiral stationary phase (CSP HPLC) at a semipreparative level at room temperature. Stability was evaluated through different techniques (circular dichroism (CD) signal decay, dynamic CSP HPLC (CSP DHPLC), dynamic NMR analysis (DNMR)) and the results compared and discussed. Phosphanes were found much less stable than the corresponding phosphane oxides, for which preliminary calculations suggest that the three-ring-flip enantiomerization mechanism (M(0)) would be easier than phosphorus pyramidal inversion. The parameters affecting the configurational stability of the residual enantiomers of C(3)-symmetric propellers are discussed.

Determination of the Enantiomerization Barrier of the Residual Enantiomers of C3 -Symmetric Tris[3-(1-Methyl-2-Alkyl)Indolyl]Phosphane Oxides: Case Study of a Multitasking HPLC Investigation Based on an Immobilized Polysaccharide Stationary Phase.

The residual enantiomers of three tris-(3-indolyl)-phosphane oxides bearing different alkyl groups (methyl, ethyl or i-propyl) in position 2 of the indole rings constituting the blades were separated on the immobilized type Chiralpak IC column in polar organic and reversed-phase modes. The good enantioselectivity and versatility of the IC CSP allowed easy isolation of the enantiomerically highly enriched samples suitable for configurational stability studies. The enantiomerization barriers of residual phosphane oxides were evaluated both by off-column techniques (CD signal and enantiomeric purity decay kinetics) and by dynamic enantioselective high-performance liquid chromatography (HPLC).

Erratum to: “Inherently chiral” thiophene-based electrodes at work: a screening of enantioselection ability toward a series of pharmaceutically relevant phenolic or catecholic amino acids, amino esters, and amine

“Inherently chiral” thiophene-based electroactive oligomer films have recently been shown to exhibit outstanding chirality manifestations. One of the most exciting among them is an unprecedented enantioselection ability as electrode surfaces. In fact, in preliminary chiral voltammetry experiments, the new electrodes have been shown to both discriminate the enantiomers of chiral probes (either enantiopure or in a mixture, in terms of large differences in peak potentials) and quantify them (in terms of linear dynamic ranges in peak currents), without the need for preliminary separation steps. Such ability has now been tested on a series of chiral DOPA-related molecules, from phenolic amino acid tyrosine (together with its methyl ester) to catecholic amino acid DOPA (together with its methyl ester), to catecholamine epinephrine (adrenaline). The wide-range enantioselectivity of the new inherently chiral electrode surfaces is fully confirmed, as large peak potential differences are obtained for probe enantiomers of the whole series working in common aqueous buffers. Moreover, interesting modulating effects on enantiodiscrimination can be observed as a function of both molecular structure and pH.

Novel highly conjugated push–pull 4,5-diazafluoren-9-ylidene based efficient NLO chromophores as a springboard for coordination complexes with large second-order NLO properties

Two new ligands Ln: N,N-dibutyl-(4,5-diazafluorenyl-9-ylidene-penta-1,3-dienyl)-amine (L2) and 9-[(1-azulenyl)methylene]-4,5-diazafluorene (L3), along with the related Zn(II) complexes with ancillary ligands of different electron withdrawing strengths ([Zn(CH3CO2)2Ln], [Zn(CF3CO2)2Ln] and [Zn(CF3SO3)2Ln]) were prepared and characterized. Their remarkable second-order NLO properties were investigated using the EFISH technique. The μβ1.91 value of [Zn(CF3SO3)2L2] is strongly dependent on concentration, reaching, to our knowledge, the highest value reported for a Zn(II) complex.