Simona Rizzo

Inherently Chiral Macrocyclic Oligothiophenes: Easily Accessible Electrosensitive Cavities with Outstanding Enantioselection Performances

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain-end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an “inherently chiral” sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability.

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphanes

A series of tris-aryl phosphanes, structurally designed to exist as residual enantiomers or diastereoisomers, bearing substituents differing in size and electronic properties on the aryl rings, were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation potential determined by voltammetry. The configurational stability of residual phosphanes, evaluated by dynamic HPLC on a chiral stationary phase or/and by dynamic (1)H and (31)P NMR spectroscopy, was found to be rather modest (barriers of about 18-20 kcal mol(-1)), much lower than that shown by the corresponding phosphane oxides (barriers of about 25-29 kcal mol(-1)). For the first time, the residual antipodes of a tris-aryl phosphane were isolated in enantiopure state and the absolute configuration assigned to them by single-crystal anomalous X-ray diffraction analysis. In this case, the racemization barrier could be calculated also by CD signal decay kinetics. A detailed computational investigation was carried out to clarify the helix reversal mechanism. Calculations indicated that the low configurational stability of tris-aryl phosphanes can be attributed to an unexpectedly easy phosphorus pyramidal inversion which, depending upon the substituents present on the blades, can occur even on the most stable of the four conformers constituting a single residual stereoisomer.

Chirality in the Absence of Rigid Stereogenic Elements: The Absolute Configuration of Residual Enantiomers of C3-Symmetric Propellers

Two new tris(aryl)phosphane oxides existing as configurationally stable residual enantiomers have been synthesised and their racemates resolved by semipreparative HPLC on a chiral stationary phase (CSP HPLC). One of them, recognised as a conglomerate, could be resolved by fractional crystallisation at a preparative scale level. In this case, the absolute configuration of the propeller-shaped molecule was determined by anomalous X-ray scattering. The problem of the correlative assignment of the absolute configuration to all known C(3)-symmetric three-bladed propeller-shaped molecules existing as stable residual enantiomers is discussed. The configurational stability of the new chiral phosphane oxides and of the corresponding phosphanes was evaluated by CD signal decay kinetics and dynamic (1)H NMR spectroscopy. The racemisation barriers in phosphanes were found about 10 kcal mol(-1) lower than those found for the corresponding oxides, though geometry and inter-ring gearing would be very similar in the two series. Configurational stability of residual tris(aryl)phosphanes was found to be influenced by the electronic availability of the phosphorus centre, as evaluated by electrochemical CV experiments.

Calix[4]arene-functionalized poly-cyclopenta[2,1-b;3,4-b′]bithiophenes with good recognition ability and selectivity for small organic molecules for application in QCM-based sensors

Some C2v symmetric cyclopenta[2,1-b;3,4-b′]bithiophenes differently substituted at the 4 position with a calix[4]arene group were synthesized and electrochemically polymerized by anodic coupling. The polymers were characterized by cyclic voltammetry, UV-vis and FTIR spectroscopy. Quartz crystal microbalance analysis showed strong affinity and selectivity of the polymers for toluene and acetone from the gas phase. The absorption process associated with the calix unit was satisfactorily described through a Langmuir isotherm, while a very small linear contribution was given by the polythiophene backbone. The absorption capacity of these materials was found to be higher by a magnitude of three orders than those displayed by cyclopentabithiophene-based polymers devoid of the calix unit, thus supplying strong, though indirect, proof of the role played by the calix units in the absorption process.

Chirality in the absence of rigid stereogenic elements: the design of configurationally stable C3-symmetric propellers.

Residual stereoisomerism is a form of stereoisomerism scarcely considered so far for applicative purposes, though extremely interesting, since the production of stereoisomers does not involve classical rigid stereogenic elements. In three-bladed propeller-shaped molecules, a preferred stereomerization mechanism, related to the correlated rotation of the rings, allows the free interconversion of stereoisomers inside separated sets (the residual stereoisomers) that can interconvert through higher energy pathways. In light of possible future applications as chiral ligands for transition metals in stereoselective processes, some C(3)-symmetric phosphorus-centered propellers, which could exist as residual enantiomers, are synthesized and the possibility of resolving their racemates into residual antipodes is explored. While the tris(aryl)methanes are configurationally stable at room temperature, only selected tris(aryl)phosphane oxides display a configurational stability high enough to allow resolution by HPLC on a chiral stationary phase (CSP HPLC) at a semipreparative level at room temperature. Stability was evaluated through different techniques (circular dichroism (CD) signal decay, dynamic CSP HPLC (CSP DHPLC), dynamic NMR analysis (DNMR)) and the results compared and discussed. Phosphanes were found much less stable than the corresponding phosphane oxides, for which preliminary calculations suggest that the three-ring-flip enantiomerization mechanism (M(0)) would be easier than phosphorus pyramidal inversion. The parameters affecting the configurational stability of the residual enantiomers of C(3)-symmetric propellers are discussed.

Determination of the Enantiomerization Barrier of the Residual Enantiomers of C3 -Symmetric Tris[3-(1-Methyl-2-Alkyl)Indolyl]Phosphane Oxides: Case Study of a Multitasking HPLC Investigation Based on an Immobilized Polysaccharide Stationary Phase.

The residual enantiomers of three tris-(3-indolyl)-phosphane oxides bearing different alkyl groups (methyl, ethyl or i-propyl) in position 2 of the indole rings constituting the blades were separated on the immobilized type Chiralpak IC column in polar organic and reversed-phase modes. The good enantioselectivity and versatility of the IC CSP allowed easy isolation of the enantiomerically highly enriched samples suitable for configurational stability studies. The enantiomerization barriers of residual phosphane oxides were evaluated both by off-column techniques (CD signal and enantiomeric purity decay kinetics) and by dynamic enantioselective high-performance liquid chromatography (HPLC).

Chirality in the absence of rigid stereogenic elements: steric and electronic effects on the configurational stability of C3 symmetric residual tris-aryl phosphanes.

Residual stereoisomers result whenever closed subsets of appropriately substituted interconverting isomers (the residual stereoisomers) are generated from a full set of stereoisomers under the operation of a favored stereomerization mechanism. In the case of the three-bladed propellers, differentiation of the edges of the blades and strict correlation in the motion of the rings are the prerequisites for the existence of residual stereoisomers. In these systems, the two-ring flip mechanism is the lowest energy process. It does not interconvert all possible conformational stereoisomers generated by helicity and the three-blade-hub rotors. In the case of C3 symmetric systems, two noninterconverting subgroups (the residual stereoisomers) are generated, each one constituted of quickly interconverting diastereoisomers. A series of tris-aryl phosphanes, structurally designed for existing as residual enantiomers or diastereoisomers, bearing substituents differing in size and electronic properties on the aryl rings, were synthesized and characterized. The configurational stability of residual phosphanes, evaluated by dynamic (1) H- and (31) P-NMR analysis and by dynamic enantioselective high-performance liquid chromatography (HPLC), was found 10 kcal mol(-1) lower than that shown by the corresponding phosphane-oxides. In accordance with the calculations, an unexpectedly low barrier for phosphorus pyramidal inversion was invoked as responsible for the scarce configurational stability of the residual tris-arylphosphanes.