Francisc Haidu

Naphtalenediimide-based donor–acceptor copolymer prepared by chain-growth catalyst-transfer polycondensation: evaluation of electron-transporting properties and application in printed polymer transistors

The semiconducting properties of a bithiophene-naphthalene diimide copolymer (PNDIT2) prepared by Ni-catalyzed chain-growth polycondensation (P1) and commercially available N2200 synthesized by Pd-catalyzed step-growth polycondensation were compared. Both polymers show similar electron mobility of ∼0.2 cm2 V−1 s−1, as measured in top-gate OFETs with Au source/drain electrodes. It is noteworthy that the new synthesis has several technological advantages compared to traditional Stille polycondensation, as it proceeds rapidly at room temperature and does not involve toxic tin-based monomers. Furthermore, a step forward to fully printed polymeric devices was achieved. To this end, transistors with PEDOT:PSS source/drain electrodes were fabricated on plastic foils by means of mass printing technologies in a roll-to-roll printing press. Surface treatment of the printed electrodes with PEIE, which reduces the work function of PEDOT:PSS, was essential to lower the threshold voltage and achieve high electron mobility. Fully polymeric P1 and N2200-based OFETs achieved average linear and saturation FET mobilities of >0.08 cm2 V−1 s−1. Hence, the performance of n-type, plastic OFET devices prepared in ambient laboratory conditions approaches those achieved by more sophisticated and expensive technologies, utilizing gold electrodes and time/energy consuming thermal annealing and lithographic steps.

Electronic states and the influence of oxygen addition on the optical absorption behaviour of manganese phthalocyanine.

The effects of electronic states and air exposure on the spectroscopic properties of manganese phthalocyanine (MnPc) have been examined. The observed features of the Q-band in the absorption spectra can be explained by intrinsic electronic properties of MnPc, i.e., the formation of singly charged molecules by charge transfer excitations. However, the reaction of MnPc with atmospheric molecular oxygen leads to deviations in peak intensities but does not change the fundamental characteristics of the spectra. Nevertheless, the reaction with oxygen changes the spin state from S = 3/2 to S = 1/2. X-ray diffraction measurements also indicate a slow diffusion process of the oxygen into the MnPc crystal. We discuss both influences to explain the behaviour of MnPc in various spectroscopic methods (EELS, ellipsometry, PES). Furthermore, we support the experimental investigations by detailed ab-initio calculations of spectroscopic properties using methods of the density functional theory framework.

Influence of film thickness and air exposure on the transport gap of manganese phthalocyanine

The interface formation between manganese phthalocyanine (MnPc) and cobalt was investigated combining ultraviolet photoelectron spectroscopy and inverse photoelectron spectroscopy. The transport band gap of the MnPc increases with the film thickness up to a value of (1.2 ± 0.3) eV while the optical band gap as determined from spectroscopic ellipsometry amounts to 0.5 eV. The gap values are smaller compared to other phthalocyanines due to metallic Mn 3d states close to the Fermi level. The transport band gap was found to open upon air exposure as a result of the disappearance of the occupied 3d electronic states.

CdZnS quantum dots formed by the Langmuir–Blodgett technique

CdZnS quantum dots (QDs) with systematically varied Zn content (from 0 to 100%) are formed in an organic matrix using the Langmuir–Blodgett technique. Annealing of the QD structures leads to a removal of the organic matrix and an increase in the Zn content for free-standing CdZnS QDs. After annealing, the size of QDs as determined from UV–vis absorption experiments is in good agreement with electron microscopy measurements. Analysis of UV–vis absorption and Raman scattering data demonstrates strong changes in the content of the CdZnS QDs upon annealing. A model of the process of QD formation is developed using the precipitation model and is found to adequately describe the experimental results.

Epitaxial growth and electronic properties of well ordered phthalocyanine heterojunctions MnPc/F16CoPc

We have prepared phthalocyanine heterojunctions out of MnPc and F16CoPc, which were studied by means of X-ray absorption spectroscopy. This heterojunction is characterized by a charge transfer at the interface, resulting in charged MnPc(δ +) and F16CoPc(δ -) species. Our data reveal that the molecules are well ordered and oriented parallel to the substrate surface. Furthermore, we demonstrate the filling of the Co 3d(z(2)) orbital due to the charge transfer, which supports the explanation of the density functional theory, that the charge transfer is local and affects the metal centers only.

Charge transfer from and to manganese phthalocyanine: bulk materials and interfaces

Manganese phthalocyanine (MnPc) is a member of the family of transition-metal phthalocyanines, which combines interesting electronic behavior in the fields of organic and molecular electronics with local magnetic moments. MnPc is characterized by hybrid states between the Mn 3d orbitals and the π orbitals of the ligand very close to the Fermi level. This causes particular physical properties, different from those of the other phthalocyanines, such as a rather small ionization potential, a small band gap and a large electron affinity. These can be exploited to prepare particular compounds and interfaces with appropriate partners, which are characterized by a charge transfer from or to MnPc. We summarize recent spectroscopic and theoretical results that have been achieved in this regard.

Transport band gap opening at metal–organic interfaces

The interface formation between copper phthalocyanine (CuPc) and two representative metal substrates, i.e., Au and Co, was investigated by the combination of ultraviolet photoelectron spectroscopy and inverse photoelectron spectroscopy. The occupied and unoccupied molecular orbitals and thus the transport band gap of CuPc are highly influenced by film thickness, i.e., molecule substrate distance. Due to the image charge potential given by the metallic substrates the transport band gap of CuPc “opens” from (1.4 ± 0.3) eV for 1 nm thickness to (2.2 ± 0.3) eV, and saturates at this value above 10 nm CuPc thickness. The interface dipoles with values of 1.2 eV and 1.0 eV for Au and Co substrates, respectively, predominantly depend on the metal substrate work functions. X-ray photoelectron spectroscopy measurements using synchrotron radiation provide detailed information on the interaction between CuPc and the two metal substrates. While charge transfer from the Au or Co substrate to the Cu metal center is pres...

Thermal ALD of Cu via reduction of Cu x O films for the advanced metallization in spintronic and ULSI interconnect systems

In this work, an approach for copper atomic layer deposition (ALD) via reduction of CuxO films was investigated regarding applications in ULSI interconnects, like Cu seed layers directly grown on diffusion barriers (e. g. TaN) or possible liner materials (e. g. Ru or Ni) as well as non-ferromagnetic spacer layers between ferromagnetic films in GMR sensor elements, like Ni or Co. The thermal CuxO ALD process is based on the Cu (I) β-diketonate precursor [(nBu3P)2Cu(acac)] and a mixture of water vapor and oxygen (“wet O2”) as co-reactant at temperatures between 100 and 130 °C. Highly efficient conversions of the CuxO to metallic Cu films are realized by a vapor phase treatment with formic acid (HCOOH), especially on Ru substrates. Electrochemical deposition (ECD) experiments on Cu ALD seed / Ru liner stacks in typical interconnect patterns are showing nearly perfectly filling behavior. For improving the HCOOH reduction on arbitrary substrates, a catalytic amount of Ru was successful introduced into the CuxO films during the ALD with a precursor mixture of the Cu (I) β-diketonate and an organometallic Ru precursor. Furthermore, molecular and atomic hydrogen were studied as promising alternative reducing agents.

Characterization of Organic Thin Films on Ferromagnetic Substrates by Spectroscopic Ellipsometry and Magneto-Optical Kerr Effect Spectroscopy

We report the characterization of metal-phthalocyanine (CuPc and CoPc) thin films prepared on magnetic substrates by spectroscopic ellipsometry (SE) and magneto-optical Kerr effect (MOKE) spectroscopy. CuPc films were prepared on lanthanum strontium manganite (LSMO) substrates while CoPc was deposited onto Co/Pt layer systems. We address the challenge to distinguish between the dominating magneto-optical response of the magnetic substrate and the contribution of the phthalocyanine layers. The procedure is demonstrated for CuPc on LSMO and also applied to CoPc on Co/Pt. The resulting spectral contribution of the organic films is compared to modeled spectra deduced from optical model calculations based on data previously obtained from phthalocyanines on silicon substrates. For CoPc on Co/Pt the average tilt angle of the molecular plane with respect to the substrate plane is estimated to be 73 ° from the ellipsometry data evaluation.