Franco Mazzei

Short and Long-Term Variations in Serum Calciotropic Hormones after a Single Very Large Dose of Ergocalciferol (Vitamin D2) or Cholecalciferol (Vitamin D3) in the Elderly

CONTEXT In humans, few studies have compared the potencies of ergocalciferol and cholecalciferol in improving and maintaining vitamin D status. OBJECTIVE Our objective was to evaluate the effects of a single very large dose of both calciferols on serum changes of 25-hydroxyvitamin D [25(OH)D], 1,25-dihydroxyvitamin D [1,25(OH)(2)D], ionized calcium, and parathyroid hormone (PTH) at baseline, and at 3, 7, 30, and 60 d. DESIGN This was a prospective randomized intervention study. SETTING The study was performed in a nursing home residence. PARTICIPANTS A total of 32 elderly female patients (age range 66-97 yr), with vitamin D deficiency was included in the study. INTERVENTION Participants were randomized into four groups of eight to receive a single dose of 300,000 IU ergocalciferol or cholecalciferol by oral (os) or im route. RESULTS 25(OH)D levels sharply increased at d 3 only when vitamins were given os. The 30-d basal difference in serum 25(OH)D was significantly greater after cholecalciferol os administration (47.8 +/- 7.3 ng/ml) compared with other forms (D(3) im: 15.9 +/- 11.3; D(2) os: 17.3 +/- 4.7; D(2) im: 5 +/- 4.4; all P < 0.001). The area under the curve (AUC) of the serum 25(OH)D against time (AUC(60)) was: D(3) os, 3193 +/- 759 ng x d/ml vs. D(2) os, 1820 +/- 512, P < 0.001; and D(3) im, 1361 +/- 492 vs. D(2) im, 728 +/- 195, P < 0.01. 25(OH)D significantly influences PTH levels at 3 (P < 0.03), 7 (P < 0.01), 30 (P < 0.01), and 60 d (P < 0.05). At 60 d, the form of vitamin (cholecalciferol) significantly lowers PTH levels (P = 0.037). CONCLUSIONS Cholecalciferol is almost twice as potent as ergocalciferol in increasing serum 25(OH)D, when administered either by mouth or im. 25(OH)D plays a role in modulating serum PTH.

Protein immobilization at gold–thiol surfaces and potential for biosensing

AbstractsSelf-assembled monolayers (SAMs) provide a convenient, flexible and simple system to tailor the interfacial properties of metals, metal oxides and semiconductors. Monomolecular films prepared by self-assembly are attractive for several exciting applications because of the unique possibility of making the selection of different types of terminal functional groups and as emerging tools for nanoscale observation of biological interactions. The tenability of SAMs as platforms for preparing biosurfaces is reviewed and critically discussed. The different immobilization approaches used for anchoring proteins to SAMs are considered as well as the nature of SAMs; particular emphasis is placed on the chemical specificity of protein attachment in view of preserving protein native structure necessary for its functionality. Regarding this aspect, particular attention is devoted to the relation between the immobilization process and the electrochemical response (i.e. electron transfer) of redox proteins, a field where SAMs have attracted remarkable attention as model systems for the design of electronic devices. Strategies for creating protein patterns on SAMs are also outlined, with an outlook on promising and challenging future directions for protein biochip research and applications.

Laccase-based biosensor for the determination of polyphenol index in wine.

In this work we have developed and characterized the use of Laccases from Trametes versicolor (TvL) and Trametes hirsuta (ThL) as biocatalytic components of electrochemical biosensors for the determination of polyphenol index in wines. Polyazetidine prepolimer (PAP) was used as immobilizing agent, multi-walled and single-walled carbon nanotubes screen-printed electrodes as sensors (MWCNTs-SPE and SWCNTs-SPE) and gallic acid as standard substrate. The amperometric measurements were carried out by using a flow system at a fixed potential of -100 mV vs. silver/silver chloride electrode in Britton-Robinson buffer 0.1 mol L(-1), pH 5. The results were compared with those obtained with the Folin-Ciocalteau reference method. The results obtained in the analysis of twelve Italian wines put in evidence the better suitability of ThL-MWCNTs-based biosensor in the determination of the polyphenol index in wines. This biosensor shows fast and reliable amperometric responses to gallic acid with a linear range 0.1-18.0 mg L(-1) (r(2)=0.999). The influence of the interferences on both spectrophotometric and electrochemical measurements have been carefully evaluated.

Multifunctional au nanoparticle dendrimer-based surface plasmon resonance biosensor and its application for improved insulin detection.

Bifunctional hydroxyl/thiol-functionalized fourth-generation polyamidoamine dendrimer (G4-PAMAM)-encapsulated Au nanoparticle (NP) was synthesized and immobilized on a mixed self-assembled monolayer (SAM)-modified gold surface. This modified surface was resistant to nonspecific adsorption of proteins having a wide range of molecular weight and isoelectric points. Part of the dendrimer thiol groups were converted to hydrazide functionalities providing an activated surface available to subsequently immobilize the receptor for developing a sensor surface to immunoaffinity reaction. Herein, the surface plasmon resonance (SPR) detection of insulin was obtained by means of a competitive immunoassay principle. The resulting Au NP dendrimer-modified surface provided an assay with high stability, significantly enhanced sensitivity, and a detection limit for analyzing insulin of 0.5 pM. The SPR detection of insulin was amplified due to the changes in the dielectric properties of the matrixes, occurring upon the biorecognition processes on the sensor surface, through the coupling of the localized plasmon of the NPs with the surface plasmon wave. The developed sensor chip was used to analyze insulin in human serum samples from healthy and diabetic patients. The results showed good correlation to the reference method. The specificity and the improved sensitivity of this biosensing platform could have significant implications for the detection of a wide range of molecules and biomarkers in complex biological media.

Amperometric sensor for pyruvate with immobilized pyruvate oxidase

Abstract Several procedures for immobilization of pyruvate oxidase by chemical bonding are reported. Attachment to nylon net was unsatisfactory in terms of yield and stability. Polyazetidine, a new commercially available prepolymer and a new nylon membrane with surface carboxyl groups provided good long-term stability, up to 30 days in the case of the nylon membrane. Under optimal conditions of solution preparation (0.1 mmol 1-1 thiamine pyrophosphate, 0.5 mmol 1-1 phosphate, 2.5 mmol 1-1 calcium and 0.04 mol 1-1 Tris buffer pH 7.0), linear calibration graphs were obtained until the lowest concentration of 10-3 mmol 1-1 pyruvate and amperometric sensors based on these membranes. With careful standardization, the procedures were suitable for application to blood serum.

Nanostructured enzymatic biosensor based on fullerene and gold nanoparticles: Preparation, characterization and analytical applications

In this work a novel electrochemical biosensing platform based on the coupling of two different nanostructured materials (gold nanoparticles and fullerenols) displaying interesting electrochemical features, has been developed and characterized. Gold nanoparticles (AuNPs) exhibit attractive electrocatalytic behavior stimulating in the last years, several sensing applications; on the other hand, fullerene and its derivatives are a very promising family of electroactive compounds although they have not yet been fully employed in biosensing. The methodology proposed in this work was finalized to the setup of a laccase biosensor based on a multilayer material consisting in AuNPs, fullerenols and Trametes versicolor Laccase (TvL) assembled layer by layer onto a gold (Au) electrode surface. The influence of different modification step procedures on the electroanalytical performance of biosensors has been evaluated. Cyclic voltammetry, chronoamperometry, surface plasmon resonance (SPR) and scanning tunneling microscopy (STM) were used to characterize the modification of surface and to investigate the bioelectrocatalytic biosensor response. This biosensor showed fast amperometric response to gallic acid, which is usually considered a standard for polyphenols analysis of wines, with a linear range 0.03-0.30 mmol L(-1) (r(2)=0.9998), with a LOD of 0.006 mmol L(-1) or expressed as polyphenol index 5.0-50 mg L(-1) and LOD 1.1 mg L(-1). A tentative application of the developed nanostructured enzyme-based biosensor was performed evaluating the detection of polyphenols either in buffer solution or in real wine samples.

Kinetic and biochemical properties of high and low redox potential laccases from fungal and plant origin

The electrochemical studies of laccase-mediator systems are aimed at understanding the mechanism of their redox transformation and their efficiency in both homogeneous and heterogeneous reactions; this topic has paramount application spanning from bleaching of paper pulp and the enzymatic degradation of lignin to the biosensors and biofuel cell development. In this paper four different laccases from Trametes hirsuta (ThL), Trametes versicolor (TvL), Melanocarpus albomyces (r-MaL) and Rhus vernicifera (RvL) were characterized from both biochemical and electrochemical points of view. Two of them (TvL and ThL) are high redox potential and two (RvL and r-MaL) are low redox potential laccases. The outline of this work is focused on the determination of catalytic and bioelectrochemical properties of these four enzymes in homogenous solution as well as immobilized onto electrode surface in the presence of a set of different redox mediators. The results measured in the homogenous reaction system correlated well with those measured with the immobilized enzymes. In addition, they are in good agreement with those reported with reference techniques, suggesting that the electrochemical methods employed in this work can be applied well in place of the traditional techniques commonly used for the kinetic characterization of laccases. These results are also discussed in terms of the known amino acid sequences and three-dimensional (3D) structures of the laccases.

Acid phosphatase/glucose oxidase-based biosensors for the determination of pesticides

Abstract This work presents new amperometric bienzymatic bioelectrodes for the determination of organophosphorus and carbamic acid type pesticides. Two different kinds of bienzymatic bioelectrodes are presented: a classical bienzymatic electrode, obtained by physicochemical immobilization of purified acid phosphatase (AP) and glucose oxidase (GOD) on the tip of an amperometric H2O2 electrode; and a hybrid biosensor, in which AP has been employed in the form of a thin layer of potato (Solanum tuberosum) tissue, endowed with a high content of enzyme activity. Both the biosensors can selectively detect glucose-6-phosphate (G6P), in the 5.0 × 10−5 −1.2 × 10−3M concentration range. Pesticides are detected, thanks to their high inhibition power towards AP, evaluated by adding the sample stepwise to a buffered solution of G6P, and recording the corresponding current change. The detection limit is therefore a function of the type of pesticide, but it can be as low as 1 μg 1−1 in the case of organophosphorus compounds. The detection limit is generally higher for carbamates, as a consequence of their weaker inhibition power towards acid phosphatase. Both bioelectrodes presented comparable values of the main physicochemical and analytical parameters evaluated for assessing their overall performance; nonetheless the plant tissue based bioelectrode exhibited a longer shelf life and a better reliability of the amperometric results.

Biosensor for direct determination of glucose and lactate in undiluted biological fluids.

This paper describes the implementation of a bienzyme sensor for the direct determination of glucose and lactate in undiluted biological samples. The biosensor exploits the competitive action versus the substrate itself by two different enzymes immobilized into a sandwich of two different membranes. In this way the quantity of substrate reaching the indicating electrode is reduced and this determines an extension of the linearity range.

Plant tissue electrode for the determination of atrazine

Abstract This work presents a new method for the simple and inexpensive determination of atrazine. The method is based on the use of a novel, partially disposable, plant tissue bioelectrode, which is sensitive to a variety of mono- and polyphenols. The biosensor is obtained by coupling a thin slice of potato ( Solanum tuberosum ) tissue, which contains high levels of the enzyme polyphenoloxidase (PPO), to a commercial O 2 -selective Clark electrode. The concentration of atrazine in aqueous samples can be determined thanks to its inhibitory power toward the catalytic activity of PPO. The low cost of this device and its good analytical performance suggest its application in the field of environmental analysis, especially in the continuous monitoring of atrazine in risk areas.