Frank L. Dorman

Evaluating a groundwater supply contamination incident attributed to Marcellus Shale gas development

Significance New techniques of high-volume hydraulic fracturing (HVHF) are now used to unlock oil and gas from rocks with very low permeability. Some members of the public protest against HVHF due to fears that associated compounds could migrate into aquifers. We report a case where natural gas and other contaminants migrated laterally through kilometers of rock at shallow to intermediate depths, impacting an aquifer used as a potable water source. The incident was attributed to Marcellus Shale gas development. The organic contaminants—likely derived from drilling or HVHF fluids—were detected using instrumentation not available in most commercial laboratories. More such incidents must be analyzed and data released publicly so that similar problems can be avoided through use of better management practices. High-volume hydraulic fracturing (HVHF) has revolutionized the oil and gas industry worldwide but has been accompanied by highly controversial incidents of reported water contamination. For example, groundwater contamination by stray natural gas and spillage of brine and other gas drilling-related fluids is known to occur. However, contamination of shallow potable aquifers by HVHF at depth has never been fully documented. We investigated a case where Marcellus Shale gas wells in Pennsylvania caused inundation of natural gas and foam in initially potable groundwater used by several households. With comprehensive 2D gas chromatography coupled to time-of-flight mass spectrometry (GCxGC-TOFMS), an unresolved complex mixture of organic compounds was identified in the aquifer. Similar signatures were also observed in flowback from Marcellus Shale gas wells. A compound identified in flowback, 2-n-Butoxyethanol, was also positively identified in one of the foaming drinking water wells at nanogram-per-liter concentrations. The most likely explanation of the incident is that stray natural gas and drilling or HF compounds were driven ∼1–3 km along shallow to intermediate depth fractures to the aquifer used as a potable water source. Part of the problem may have been wastewaters from a pit leak reported at the nearest gas well pad—the only nearby pad where wells were hydraulically fractured before the contamination incident. If samples of drilling, pit, and HVHF fluids had been available, GCxGC-TOFMS might have fingerprinted the contamination source. Such evaluations would contribute significantly to better management practices as the shale gas industry expands worldwide.

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC x GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC x GC column set used an Rtx-Dioxin 2 phase as the first dimension ((1)D ) and an Rtx-500 as the second dimension ((2)D ). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in (1)D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in (2)D . The instrumental limit of detection (iLODs) was 0.5pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5-200pg. GC x GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.

Liquid chromatography-atmospheric pressure photoionization tandem mass spectrometry for analysis of 36 halogenated flame retardants in fish.

A comprehensive, sensitive and high-throughput liquid chromatography-atmospheric pressure photoionization tandem mass spectrometry (LC-APPI-MS/MS) method has been developed for analysis of 36 halogenated flame retardants (HFRs). Under the optimized LC conditions, all of the HFRs eluted from the LC column within 14min, while maintaining good chromatographic separation for the isomers. Introduction of the pre-heated dopant to the APPI source decreased the background noise fivefold, which enhanced sensitivity. An empirical equation was proposed to describe the relation between the ion intensity and dopant flow. The excellent on-column instrument detection limits averaged 4.7pg, which was similar to the sensitivity offered by gas chromatography-high-resolution mass spectrometry (GC-HRMS). This method was used to analyze a series of fish samples. Good agreement was found between the results for PBDEs from LC-APPI-MS/MS and GC-HRMS.

The Evaluation of Fatty Acid Ratios in Latent Fingermarks by Gas Chromatography/Mass Spectrometry (GC/MS) Analysis†

Despite advances in DNA, fingermarks remain one the best forms of evidence available. While fingermarks are routinely analyzed in terms of their patterns, it may be possible to obtain additional information in terms of their chemical composition. If successful, a chemical analysis of the constituents of a fingermark may give scientists additional information that may help in the identification of a person. The results presented herein describe the initial investigation into the analytical determination of some of these compounds, specifically the fatty acids. This study was specifically aimed at identifying possible fatty acids, which could aid in profiling or perhaps uniquely identifying an individual. Preliminary data obtained in this study suggests that this may in fact be possible, though additional research is certainly necessary. Utilizing gas chromatography–mass spectrometry, significant differences in the ratios of several fatty acid methyl esters were found when comparing individuals of varying race and gender. In addition, large intervariability and intravariability was discovered for some compounds, suggesting the possibility of being able to individualize based on chemical profile. Follow‐up investigations will continue to determine whether this continues to be the case as greater numbers of individuals are sampled and more extensive control and information on the subjects is obtained.

Using computer modeling to predict and optimize separations for comprehensive two-dimensional gas chromatography

In order to fully realize the separation power of comprehensive two-dimensional gas chromatography (GC x GC), a means of predicting and optimizing separations based on operating variables was developed. This approach initially calculates the enthalpy (DeltaH) and entropy (DeltaS) for the target compounds from experimental input data, and then uses this information to simultaneously optimize all column and runtime variables, including stationary phase composition, by comparing the performance of large numbers of simulated separations. This use of computer simulation has been shown to be a useful aid in conventional separations. It becomes almost essential for GC x GC optimization because of the large number of variables involved and their very complex interaction. Agreement between experimental and predicted values of standard test samples (Grob mix) using GC x GC separation shows that this approach is accurate. We believe that this success can be extended to more challenging mixtures resulting in optimizations that are simpler and transferable between GC x GC instruments.

Complementary nontargeted and targeted mass spectrometry techniques to determine bioaccumulation of halogenated contaminants in freshwater species.

Assessing the toxicological significance of complex environmental mixtures is challenging due to the large number of unidentified contaminants. Nontargeted analytical techniques may serve to identify bioaccumulative contaminants within complex contaminant mixtures without the use of analytical standards. This study exposed three freshwater organisms (Lumbriculus variegatus, Hexagenia spp., and Pimephales promelas) to a highly contaminated soil collected from a recycling plant fire site. Biota extracts were analyzed by Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and mass defect filtering to identify bioaccumulative halogenated contaminants. Specific bioaccumulative isomers were identified by comprehensive two-dimensional gas chromatography high-resolution time-of-flight mass spectrometry (GCxGC-HRToF). Targeted analysis of mixed brominated/chlorinated dibenzo-p-dioxins and dibenzofurans (PXDD/PXDFs, X = Br and Cl) was performed by atmospheric pressure gas chromatography tandem mass spectrometry (APGC-MS/MS). Relative sediment and biota instrument responses were used to estimate biota-sediment accumulation factors (BSAFs). Bioaccumulating contaminants varied among species and included polychlorinated naphthalenes (PCNs), polychlorinated dibenzofurans (PCDFs), chlorinated and mixed brominated/chlorinated anthracenes/phenanthrenes, and pyrenes/fluoranthenes (Cl-PAHs and X-PAHs, X = Br and Cl), as well as PXDD/PXDFs. Bioaccumulation potential among isomers also varied. This study demonstrates how complementary high-resolution mass spectrometry techniques identify persistent and bioaccumulative contaminants (and specific isomers) of environmental concern.

A review of the determination of persistent organic pollutants for environmental forensics investigations.

The field of environmental forensics emerged in the 1980s as a consequence of legislative frameworks enacted to enable parties, either states or individuals, to seek compensation with regard to contamination or injury due to damage to the environment. This legal environment requires stringent record keeping and defendable data therefore analysis can sometimes be confined to data to be obtained from certified laboratories using a standard accredited analytical method. Many of these methods were developed to target specific compounds for risk assessment purposes and not for environmental forensics applications such as source identification or age dating which often require larger data sets. The determination of persistent organic pollutants (POPs) for environmental forensic applications requires methods that are selective but also cover a wide range of target analytes which can be identified and quantified without bias. POPs are used in a wide variety of applications such as flame retardants, fire suppressants, heat transfer agents, surfactants and pesticides mainly because of their chemical inertness and stability. They also include compounds such as dioxins that can be unintentionally produced from industrial activities. POPs are persistent in the environment, bioaccumulative and/or toxic and therefore require analytical methods that are sensitive enough to meet the low detection limits needed for the protection of the environment and human health. A variety of techniques, procedures and instruments can be used which are well suited for different scenarios. Optimised methods are important to ensure that analytes are quantitatively extracted, matrix coextractables and interferences are removed and instruments are used most effectively and efficiently. This can require deviation from standard methods which can open the data up to further scrutiny in the courtroom. However, when argued effectively and strict QA/QC procedures are followed the development and optimization of methods based on investigation specific scenarios has the potential to generate better quality and more useful data.

Improved micromachined column design and fluidic interconnects for programmed high-temperature gas chromatography separations

This work focuses on the development and experimental evaluation of micromachined chromatographic columns for use in a commercial gas chromatography (GC) system. A vespel/graphite ferrule based compression sealing technique is presented using which leak-proof fluidic interconnection between the inlet tubing and the microchannel was achieved. This sealing technique enabled separation at temperatures up to 350°C on a μGC column. This paper reports the first high-temperature separations in microfabricated chromatographic columns at these temperatures. A 2m microfabricated column using a double Archimedean spiral design with a square cross-section of 100μm×100μm has been developed using silicon microfabrication techniques. The microfabricated column was benchmarked against a 2m 100μm diameter commercial column and the performance between the two columns was evaluated in tests performed under identical conditions. High temperature separations of simulated distillation (ASTM2887) and polycyclic aromatic hydrocarbons (EPA8310) were performed using the μGC column in temperature programmed mode. The demonstrated μGC column along with the high temperature fixture offers one more solution toward potentially realizing a portable μGC device for the detection of semi-volatile environmental pollutants and explosives without the thermal limitations reported to date with μGC columns using epoxy based interconnect technology.

Comprehensive characterization of the halogenated dibenzo-p-dioxin and dibenzofuran contents of residential fire debris using comprehensive two-dimensional gas chromatography coupled to time of flight mass spectrometry.

A comprehensive approach was taken to characterize the polyhalogenated dibenzo-p-dioxin and dibenzofuran contents of fire debris. Household and electronics fire simulations were performed to create samples representative of those firefighters most typically come in contact with. Sample analysis was performed using GC×GC-TOFMS to provide a comprehensive profile of the halogenated dioxins and furans present among the two types of fire debris. Both the household fire and electronics fire simulations produced a significant amount of polybrominated dibenzofurans. Only the electronics rich fire simulation produced mixed halogenated (Br/Cl) dibenzofurans in amounts above the limit of detection of the analytical method. Of the mixed halogenated dibenzofurans identified, a majority were those having no commercially available standard to allow for specific congener identification. GC×GC-TOFMS was extremely beneficial for the identification of compound classes due to the manner in which compounds classify in the two-dimensional chromatographic plane, thus aiding data reduction for these materials.

QuEChERS extraction of benzodiazepines in biological matrices

Two common analytical chemical problems often encountered when using chromatographic techniques in drug analysis are matrix interferences and ion suppression. Common sample preparation often involves the dilution of the sample prior to injection onto an instrument, especially for liquid chromatography–mass spectrometry (LC–MS) analyses. This practice frequently does not minimize or eliminate conditions that may cause ion-suppression and therefore, suffer more from reduced method robustness. In order to achieve higher quality results and minimize possible interferences, various sample preparation techniques may be considered. Through the use of QuEChERS (“catchers”), a novel sample preparation technique used for high aqueous content samples, benzodiazepines can be extracted from biological fluids, such as blood and urine. This approach has shown increased recoveries of target compounds when using quantification by both external and internal standard. This increase in the recoveries has been attributed to a matrix enhancement and was determined through the use of the method of standard addition. While improving the overall analytical method for gas chromatography–mass spectrometry (GC–MS) analysis, it is not clear if this approach represents an overall benefit for laboratories that have both GC–MS and high performance liquid chromatography tandem mass spectrometry (HPLC–MS/MS) capability. Demonstrating evidence of variable ionization (enhancement, ion source inertness, etc.), the method of quantification should be focused on in future studies.