G. Heck

Novel Expanding Solvent-SAGD Process "ES-SAGD"

The steam assisted gravity drainage (SAGD) process has been successfully tested in field pilots, and commercial applications are currently underway by a number of oil companies. The process yields higher oil rates and faster reservoir depletion, as compared to other in situ oil recovery processes. Current developments of the SAGD process are aimed at improving oil rates, improving oil-to-steam ratios OSR, reducing energy, and minimizing water disposal requirements. In addition to SAGD, progress has been made in the development of solvent injection process. These processes result in lower oil rates and energy, requirements as compared to SAGD. At the present time, limited field results are available for the solvent processes to allow for adequate evaluation of field performance. A novel approach for combining the benefits of steam and solvents in the recovery of heavy oil and bitumen has been undertaken at the Alberta Research Council (ARC). A newly patented Expanding Solvent SAGD ES-SAGD process has been developed. The process has been successfully field-tested and resulted in improved oil rates improved OSR, and lower energy and water requirements as compared to SAGD. The paper discusses the concept and laboratory testing of the ES-SAGD process.

Laboratory Experimental Testing and Development of an Efficient Low Pressure ES-SAGD Process

Certain Athabasca reservoirs have low pressures because they have been depleted due to production of overlying gas. Other reservoirs are naturally occurring low pressure shallow bitumen reservoirs. Hence, there is a need to develop or investigate recovery processes under which such low pressure reservoirs can be developed. As a result of this, experiments were initiated to extend the Expanding Solvent-SAGD (ES-SAGD) process application to low pressure Athabasca reservoirs in order to evaluate oil recovery from such reservoirs. The goal of these experiments is to develop a low pressure ES-SAGD process with better performance than, or comparable performance to, that of the high pressure SAGD process. This paper describes five sets of laboratory experiments examining recovery processes, which includes a low pressure (500 kPag +/- 50 kPag) SAGD experiment, a propane-SAGD experiment, multi-component ES-SAGD (at low and high concentrations) experiments and a high pressure (2,100 kPag +/- 50 kPag) SAGD experiment. The results of these experiments are presented and analyzed in order to evaluate the performance of low pressure ES-SAGD in comparison to SAGD (at low and high pressure) and propane-SAGD at low pressure. The processes were assessed for recovery, recovery time, heat loss, steam chamber growth and energy efficiency. The principal conclusion is that the low pressure multi-component ES-SAGD at the right concentration (mostly at low concentration) is fairly competitive with SAGD at a high pressure. The energy consumption in the steam or steam/solvent zone per oil recovered (ECDZ) for low pressure multi-component ES-SAGD experiments is much lower than the low pressure and high pressure SAGD tests. The propane-SAGD test recovery is very low, even at higher energy consumption, than that of the ES-SAGD experiment at low concentration. The work presented in this paper shows that the application of a multi-component ES-SAGD process in the field at low pressure is a practical option. It also shows that bitumen/heavy oil reservoirs that would have remained untapped due to low reservoir pressure could be produced at lower energy consumption per oil recovered if a low pressure ES-SAGD process at low concentration of the diluents is employed in the recovery of the oil.

SAGD Wind-Down: Lab Test and Simulation

As SAGD moves from pilot test to commercial operation, a number of issues need to be dealt with. These include diagnosing and solving operational problems and improving energy efficiency. One of the methods of improving energy efficiency is to prolong oil production after steam injection stops by using the energy remaining in place. The results of a laboratory experiment and corresponding numerical history matching are reported in this paper. The study showed that the hot chamber continued its expansion after steam injection was stopped and a gas injection was initiated. The continuous expanding period represented the most productive period in the gas injection wind-down process. A total of 12.5% of OOIP was recovered during wind-down. Successful history matching of both the oil production curve and temperature profiles at different times demonstrated that the numerical simulation could handle the gas/steam mixing phenomena. Gas concentration profiles from numerical simulation indicated that gas was concentrated at the region where oil saturation was experiencing big changes.

Steam Alternating Solvent Process: Lab Test and Simulation

A new heavy oil recovery process, the Steam Alternating Solvent (SAS) process, is studied by lab experiments and corresponding numerical simulation. The SAS process involves injecting steam and solvent alternately, using well configurations similar to those in the SAGD process. This process is designed to combine the advantages of the SAGD and VAPEX processes to minimize the energy input in heavy oil and bitumen recovery. Lab experiments were conducted using a 2D high-pressure/ high-temperature model. One baseline SAGD test and one SAS test were performed using an oil sample from Burnt Lake. A mixture of propane and methane was used as the solvent in the SAS test. The results showed that the energy input in the SAS process was 47% lower than that of the SAGD process for recovering the same amount of oil. The post-run analysis revealed that asphaltene precipitation occurred in the porous medium. Numerical history matching of the test data using Computer Modelling Groups STARS reservoir simulator captured the main features of the process.

Agglomeration and coprocessing of Alberta subbituminous coal

Abstract Coal/oil agglomerates have been prepared from Alberta subbituminous coal and Alberta heavy oils. Pulverized coal, partially dried agglomerates and steam-stripped agglomerates showed similar process performance when subjected to coprocessing with a supported catalyst. The properties of the process derived non-distillable oils were similar irrespective of the feed pretreatment procedure. Clay and silica mineral matter in the coal had no observable catalytic effect.