G. Scott Dotson

Analysis of finite dose dermal absorption data: Implications for dermal exposure assessment

A common dermal exposure assessment strategy estimates the systemic uptake of chemical in contact with skin using the fixed fractional absorption approach: the dermal absorbed dose is estimated as the product of exposure and the fraction of applied chemical that is absorbed, assumed constant for a given chemical. Despite the prominence of this approach there is little guidance regarding the evaluation of experiments from which fractional absorption data are measured. An analysis of these experiments is presented herein, and limitations to the fixed fractional absorption approach are discussed. The analysis provides a set of simple algebraic expressions that may be used in the evaluation of finite dose dermal absorption experiments, affording a more data-driven approach to dermal exposure assessment. Case studies are presented that demonstrate the application of these tools to the assessment of dermal absorption data.

Cumulative Risk Assessment (CRA): Transforming the Way We Assess Health Risks

Human health risk assessments continue to evolve and now focus on the need for cumulative risk assessment (CRA). CRA involves assessing the combined risk from coexposure to multiple chemical and nonchemical stressors for varying health effects. CRAs are broader in scope than traditional chemical risk assessments because they allow for a more comprehensive evaluation of the interaction between different stressors and their combined impact on human health. Future directions of CRA include greater emphasis on local-level community-based assessments; integrating environmental, occupational, community, and individual risk factors; and identifying and implementing common frameworks and risk metrics for incorporating multiple stressors.

Dermal permeation of 2-hydroxypropyl acrylate, a model water-miscible compound: Effects of concentration, thermodynamic activity and skin hydration

UNLABELLED The goal of these studies was to measure and interpret the skin permeability characteristics of 2-hydroxypropyl acrylate (HPA) as a model compound that is completely miscible with water. METHODS In vitro permeation from HPA-H2O binary mixtures through human epidermis and silicone membranes was measured. Thermodynamic activities of HPA and H2O in these mixtures were determined. Permeation was also measured through epidermis and silicone from donor solutions with constant HPA activity but different H2O activities. Water uptake into desiccated human stratum corneum (SC) equilibrated with HPA-H2O mixtures was determined. RESULTS Steady-state flux of HPA through silicone was a linear function of HPA activity but not HPA concentration. For epidermis on the other hand, flux increased with HPA activity only for HPA activities ≤ 0.35. At constant HPA activity, flux decreased 4.5-fold as water activity decreased from 1 to 0.8. Incubation of SC with HPA-H2O mixtures resulted in substantial changes in SC water content, dependent on the water activity of the mixture and consistent with measured SC water sorption data. CONCLUSIONS These experiments provide unequivocal evidence of a substantial increase in epidermal barrier function resulting from SC dehydration. Dehydration-related alterations in the SC appear responsible for the observed flux characteristics.

The evolution of skin notations for occupational risk assessment: A new NIOSH strategy

This article presents an overview of a strategy for assignment of hazard-specific skin notations (SK), developed by the National Institute for Occupational Safety and Health (NIOSH). This health hazard characterization strategy relies on multiple SKs capable of delineating systemic (SYS), direct (DIR), and immune-mediated (SEN) adverse effects caused by dermal exposures to chemicals. One advantage of the NIOSH strategy is the ability to combine SKs when it is determined that a chemical may cause multiple adverse effects following dermal contact (e.g., SK: SYS-DIR-SEN). Assignment of the SKs is based on a weight-of-evidence (WOE) approach, which refers to the critical examination of all available data from diverse lines of evidence and the derivation of a scientific interpretation based on the collective body of data including its relevance, quality, and reported results. Numeric cutoff values, based on indices of toxic potency, serve as guidelines to aid in consistently determining a chemicals relative toxicity and hazard potential. The NIOSH strategy documents the scientific rationale for determination of the hazard potential of a chemical and the subsequent assignment of SKs. A case study of acrylamide is presented as an application of the NIOSH strategy.

In vitro Human Epidermal Penetration of 1-Bromopropane

1-Bromopropane (1-BP; CAS number 106-94-5), also known as n-propyl bromide, is a halogenated short-chain alkane used as an organic solvent with numerous commercial and industrial applications, including garment dry cleaning and vapor degreasing of metals. The purpose of this study was to determine the dermal absorption characteristics and corrosivity of 1-BP. Heat-separated human epidermal membranes were mounted on static diffusion cells. Different exposure scenarios were studied (infinite dose, finite dose, and transient exposure) using neat 1-BP and saturated aqueous solution as donor. Steady-state fluxes for infinite-dose neat 1-BP exposure averaged 625 to 960 μg cm−2 h−1. The finite-dose (10 μl/cm2 = 13.5 mg/cm2) unoccluded donor resulted in penetration of <0.2% of the applied dose (22 μg/cm2). A 10-min transient exposure to infinite dose resulted in total penetration of 179 μg/cm2. Steady-state 1-BP fluxes from neat application of a commercial dry cleaning solvent were similar (441 to 722 μg cm−2 h−1). The permeability coefficient of 1-BP in water vehicle was 0.257 ± 0.141 cm/h. The absorption potential of 1-BP following dermal exposure is dependent upon the type and duration of exposure. Donor losses due to evaporation were approximately 500-fold greater than dermal absorption flux; evaporation flux was 420 mg cm−2 h−1. 1-BP is cytotoxic but not corrosive, based on results from a cultured reconstructed human epidermal model (EpiDerm Skin Corrosivity Test).

Efficacy of predictive modeling as a scientific criterion in dermal hazard identification for assignment of skin notations

Skin notations (SNs) represent a hazard characterization tool for alerting workers of health hazards associated with dermal contact with chemicals. This study evaluated the efficacy of a predictive model utilized by the National Institute for Occupational Safety and Health to identify dermal hazards based on potential of systemic absorption compared to hazard assignments based on dermal lethal dose 50% or logarithm of octanol-water partition coefficient. A total of 480 chemicals assigned an SN from at least one of seven institutes were selected and partitioned into seven hazard categories by frequency of SN assignment to provide a basis of evaluation for the predictivity of the examined criteria. We find that all three properties serve as a qualitative indicator in support of a dichotomous decision on dermal hazard; the predictive modeling was identified from a multiple regression analysis as the most significant indicator. The model generated estimates that corresponded to anticipated hazard potentials, suggesting a role of the model to further serve as a hazard-ranking tool. The hazard-ranking capability of the model was consistent with the scheme of acute toxicity classification in the Globally Harmonized System of Classification and Labeling of Chemicals.

Recommendations for Biomonitoring of Emergency Responders: Focus on Occupational Health Investigations and Occupational Health Research

The disaster environment frequently presents rapidly evolving and unpredictable hazardous exposures to emergency responders. Improved estimates of exposure and effect from biomonitoring can be used to assess exposure-response relationships, potential health consequences, and effectiveness of control measures. Disaster settings, however, pose significant challenges for biomonitoring. A decision process for determining when to conduct biomonitoring during and following disasters was developed. Separate but overlapping decision processes were developed for biomonitoring performed as part of occupational health investigations that directly benefit emergency responders in the short term and for biomonitoring intended to support research studies. Two categories of factors critical to the decision process for biomonitoring were identified: Is biomonitoring appropriate for the intended purpose and is biomonitoring feasible under the circumstances of the emergency response? Factors within these categories include information needs, relevance, interpretability, ethics, methodology, and logistics. Biomonitoring of emergency responders can be a valuable tool for exposure and risk assessment. Information needs, relevance, and interpretability will largely determine if biomonitoring is appropriate; logistical factors will largely determine if biomonitoring is feasible. The decision process should be formalized and may benefit from advance planning.

Chemical-induced asthma and the role of clinical, toxicological, exposure and epidemiological research in regulatory and hazard characterization approaches

ABSTRACT Uncertainties in understanding all potential modes‐of‐action for asthma induction and elicitation hinders design of hazard characterization and risk assessment methods that adequately screen and protect against hazardous chemical exposures. To address this challenge and identify current research needs, the University of Cincinnati and the American Cleaning Institute hosted a webinar series to discuss the current state‐of‐science regarding chemical‐induced asthma. The general consensus is that the available database, comprised of data collected from routine clinical and validated toxicological tests, is inadequate for predicting or determining causal relationships between exposures and asthma induction for most allergens. More research is needed to understand the mechanism of asthma induction and elicitation in the context of specific chemical exposures and exposure patterns, and the impact of population variability and patient phenotypes. Validated tools to predict respiratory sensitization and to translate irritancy assays to asthma potency are needed, in addition to diagnostic biomarkers that assess and differentiate allergy versus irritant‐based asthmatic responses. Diagnostic methods that encompass the diverse etiologies of asthmatic responses and incorporate robust exposure measurements capable of capturing different temporal patterns of complex chemical mixtures are needed. In the absence of ideal tools, risk assessors apply hazard‐based safety assessment methods, in conjunction with active risk management, to limit potential asthma concerns, proactively identify new concerns, and ensure deployment of approaches to mitigate asthma‐related risks.