Gajjala Sumana

Zinc oxide-chitosan nanobiocomposite for urea sensor

Zinc oxide (ZnO)-chitosan (CH) nanobiocomposite film onto indium-tin-oxide (ITO) coated glass has been used to immobilize urease (Urs) and glutamate dehydrogenase (GLDH) for urea detection. The presence of ZnO nanoparticles in CH results in its increased surface area and enhanced electron transfer kinetics. The Urs-GLDH/CH-ZnO/ITO bioelectrode characterized using electrochemical, Fourier transform infrared, and scanning electron microscopy studies exhibit linearity of 5–100mg∕dl, detection limit of 3mg∕dl, response time of 10s, reproducibility as 20 times, and shelf life of 3months. The low Michaelis–Menten constant (Km) value (4.92mg∕dl) indicates enhanced affinity of enzyme with nanobiocomposite.

Zirconia based nucleic acid sensor for Mycobacterium tuberculosis detection

Nanostructured zirconium oxide (ZrO2) film (particle size∼35 nm), electrochemically deposited onto gold(Au) surface, has been used to immobilize 21-mer oligonucleotide probe (ssDNA) specific to Mycobacterium tuberculosis by utilizing affinity between oxygen atom of phosphoric group and zirconium to fabricate DNA biosensor. This DNA-ZrO2/Au bioelectrode, characterized using x-ray diffraction, Fourier transform infrared spectroscopy, cyclic voltammetry, and scanning electron microscopy techniques, can be used for early and rapid diagnosis of M. tuberculosis with detection limit of 0.065 ng/μL within 60s.Nanostructured zirconium oxide (ZrO2) film (particle size∼35 nm), electrochemically deposited onto gold(Au) surface, has been used to immobilize 21-mer oligonucleotide probe (ssDNA) specific to Mycobacterium tuberculosis by utilizing affinity between oxygen atom of phosphoric group and zirconium to fabricate DNA biosensor. This DNA-ZrO2/Au bioelectrode, characterized using x-ray diffraction, Fourier transform infrared spectroscopy, cyclic voltammetry, and scanning electron microscopy techniques, can be used for early and rapid diagnosis of M. tuberculosis with detection limit of 0.065 ng/μL within 60s.

Chitosan–iron oxide nano-composite platform for mismatch-discriminating DNA hybridization for Neisseria gonorrhoeae detection causing sexually transmitted disease

Electrochemically fabricated nano-composite film of chitosan (CH)-iron oxide (Fe(3)O(4)) has been used to detect gonorrhoea, a sexually transmitted disease (STD) via immobilization of biotinylated probe DNA (BDNA) using avidin-biotin coupling for rapid and specific (mismatch-discriminating) DNA hybridization. The presence of Fe(3)O(4) nanoparticles (∼18nm) increases the electro-active surface area of the nano-biocomposite that provides desirable environment for loading of DNA with better conformation leading to increased electron transfer kinetics between the medium and electrode. The differential pulse voltammetric (DPV) studies have been conducted using BDNA/avidin/CH-Fe(3)O(4)/ITO electrode owing to the reduction of the methylene blue (MB) indicator and investigate electron transfer between MB moieties and electrode for one and two-bases mismatch. This STD biosensor is found to have a detection limit (1 × 10(-15)M) and a wide dynamic range (from 1 × 10(-16)M to 1 × 10(-6)M) using the complementary target DNA. In addition, the sensing system can be utilized to accurately discriminate complementary sequence from mismatch sequences.

Ring like self assembled Ni nanoparticles based biosensor for food toxin detection

The self-assembled ring like nickel (RnNi ∼ 10-20 nm) nanoparticles have been prepared by pulsed laser ablation method and confirmed by transmission electron microscopy. These RnNi nanoparticles electrophoretically deposited onto the indium-tin-oxide (ITO) glass substrate have been functionalized with dimethyl sulfoxide (DMSO) for covalent immobilization of anti-aflatoxin (a-AfB1) monoclonal antibodies and bovine serum albumin as blocking agent. The electrochemical response studies of a-AfB1/DMSO/RnNi-film/ITO bioelectrode reveal linearity as 5-100 ngdL−1, detection limit of 32.7 ngdL−1, sensitivity of 0.59 μA/ng dL−1, and shelf-life of 60 days. The low value (1.3 × 1014 molL−1) of association constant (Ka) shows high affinity towards aflatoxin.

STD sensor based on nucleic acid functionalized nanostructured polyaniline.

STD (sexually transmitted disease, Gonorrhoea) sensor based on nucleic acid probe (from Opa, a multi-copy gene of Neisseria gonorrhoeae) functionalized nanostructured-polyaniline coated onto indium-tin-oxide-coated glass plate has been fabricated using avidin-biotin as cross-linking agent. This DNA functionalized electrode can specifically detect upto 0.5 x 10(-15)M of complementary target within 60s of hybridization time at 25 degrees C by differential pulse voltammetry (DPV) using methylene blue as electro-active DNA hybridization indicator. This highly sensitive and specific nucleic acid functionalized nanostructured-polyaniline electrode can distinguish presence of N. gonorrhoeae from Neisseria meningitidis and Escherichia coli culture and spiked samples from the urethral swabs of the patients.

Chitosan encapsulated quantum dots platform for leukemia detection.

We report results of the studies relating to electrophoretic deposition of nanostructured composite of chitosan (CS)-cadmium-telluride quantum dots (CdTe-QDs) onto indium-tin-oxide coated glass substrate. The high resolution transmission electron microscopic studies of the nanocomposite reveal molecular level coating of the CdTe-QDs with CS molecules in the colloidal dispersion medium. This novel composite platform has been explored to fabricate an electrochemical DNA biosensor for detection of chronic myelogenous leukemia (CML) by immobilizing amine terminated oligonucleotide probe sequence containing 22 base pairs, identified from BCR-ABL fusion gene. The results of differential pulse voltammetry reveal that this nucleic acid sensor can detect as low as 2.56 pM concentration of complementary target DNA with a response time of 60s. Further, the response characteristics show that this fabricated bioelectrode has a shelf life of about 6 weeks and can be used for about 5-6 times. The results of experiments conducted using clinical patient samples reveal that this sensor can be used to distinguish CML positive and the negative control samples.

Nanobiocomposite platform based on polyaniline-iron oxide-carbon nanotubes for bacterial detection.

The nanocomposite based on polyaniline (PANI)-iron oxide nanoparticles (nFe(3)O(4)) and multi walled carbon-nanotubes (CNT) has been fabricated onto indium tin oxide (ITO) coated glass plate via facile electrochemical synthesis of polyaniline in presence of nFe(3)O(4) (~20 nm) and CNT (20-80 nm in diameter). The results of transmission electron microscopic studies show evidence of coating of PANI and nFe(3)O(4) onto the CNT. The PANI-nFe(3)O(4)-CNT/ITO nanoelectrode has been characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy studies. The biotinylated nucleic acid probe sequence consisting of 20 bases has been immobilized onto PANI-nFe(3)O(4)-CNT/ITO nanoelectrode using biotin-avidin coupling. It is shown that the PANI-nFe(3)O(4)-CNT platform based biosensor can be used to specifically detect bacteria (N. gonorrhoeae) at minute concentration as low as (1×10(-19) M) indicating high sensitivity within 45 s of hybridization time at 298 K by differential pulse voltammetry using methylene blue as electroactive indicator. This bacterial sensor has also been tested with 4 positive and 4 negative PCR amplicons of gonorrhoea affected patient samples. The results of these studies have implications towards the fabrication of a handheld device for Neisseria gonorrhoeae detection that may perhaps result in a decrease in the human immunodeficiency virus infections.

Sol–gel derived nano-structured zinc oxide film for sexually transmitted disease sensor

A 20-mer thiolated oligonucleotide probe (th-ssDNA) specific to Neisseria gonorrhoeae immobilized onto a sol-gel derived nano-structured zinc oxide (ZnO) film dip-coated onto an indium-tin-oxide (ITO) glass substrate has been used for the fabrication of a DNA biosensor for sexually transmitted disease (gonorrhoea) detection using hybridization technique. The results of characterization studies carried out on this th-ssDNA-ZnO/ITO bioelectrode using X-ray diffraction, UV-Visible, Fourier-transform infrared, scanning electron microscopy and electrochemical techniques reveal the linearity as 0.000524 fmol-0.524 nmol, with a detection limit of 0.000704 fmol within 60 s.

Electrophoretic fabrication of chitosan-zirconium-oxide nanobiocomposite platform for nucleic acid detection.

The present work describes electrophoretic fabrication of nanostructured chitosan-zirconium-oxide composite (CHIT-NanoZrO(2)) film (180 nm) onto indium-tin-oxide (ITO)-coated glass plate. This nanobiocomposite film has been explored as immobilization platform for probe DNA specific to M. Tuberculosis as model biomolecule to investigate its sensing characteristics. It is revealed that pH-responsive behavior of CHIT and its cationic skeleton is responsible for the movement of CHIT-NanoZrO(2) colloids toward cathode during electrophoretic deposition. The FT-IR, SEM, TEM, and EDX techniques have been employed for the structural, morphological, and composition analysis of the fabricated electrodes. The morphological studies clearly reveal uniform inter-linking and dispersion of hexagonal nanograins of ZrO(2) (30-50 nm) into the chitosan matrix, resulting in homogeneous nanobiocomposite formation. Electrochemical response measurements of DNA/CHIT-NanoZrO(2)/ITO bioelectrode, carried out using cyclic voltammetry and differential pulse voltammetry, reveal that this bioelectrode can specifically detect complementary target DNA up to 0.00078 μM with sensitivity of 6.38 × 10(-6) AμM(-1).

Low density lipoprotein detection based on antibody immobilized self-assembled monolayer: investigations of kinetic and thermodynamic properties.

Human plasma low density lipoprotein (LDL) immunosensor based on surface plasmon resonance (SPR) and quartz crystal microbalance (QCM) was fabricated by immobilizing antiapolipoprotein B (AAB) onto self-assembled monolayer (SAM) of 4-aminothiophenol (ATP). The AAB/ATP/Au immunosensor can detect LDL up to 0.252 microM (84 mg/dL) and 0.360 microM (120 mg/dL) with QCM and SPR, respectively. The SPR and QCM measurements were further utilized to study the reaction kinetics of the AAB-LDL interaction. The adsorption process involved was explored using Langmuir adsorption isotherm and Freundlich adsorption models. The thermodynamic parameters such as change in Gibbs free energy (DeltaG(ads)), change in enthalpy (DeltaH(ads)), and change in entropy (DeltaS(ads)) determined at 283, 298, and 308 K revealed that the AAB-LDL interaction is endothermic in nature and is governed by entropy. Kinetic, thermodynamic, and sticking probability studies disclosed that desorption of the water molecules from the active sites of AAB and LDL plays a key role in the interaction process and increase in temperature favors binding of LDL with the AAB/ATP/Au immunosensor. Thus, the studies were utilized to unravel the most important subprocess involved in the adsorption of LDL onto AAB-modified ATP/Au surface that may help in the fabrication of LDL immunosensors with better efficiency.