Galina E. Pozmogova

Synthesis, characterization and in vitro activity of thrombin-binding DNA aptamers with triazole internucleotide linkages

A series of DNA aptamers bearing triazole internucleotide linkages that bind to thrombin was synthesized. The novel aptamers are structurally analogous to the well-known thrombin-inhibiting G-quadruplexes TBA15 and TBA31. The secondary structure stability, binding affinity for thrombin and anticoagulant effects of the triazole-modified aptamers were measured. A modification in the central loop of the aptamer quadruplex resulted in increased nuclease resistance and an inhibition efficiency similar to that of TBA15. The likely aptamer-thrombin binding mode was determined by molecular dynamics simulations. Due to their relatively high activity and the increased resistance to nuclease digestion imparted by the triazole internucleotide linkages, the novel aptamers are a promising alternative to known DNA-based anticoagulant agents.

Comparison of the 'chemical' and 'structural' approaches to the optimization of the thrombin-binding aptamer.

Noncanonically structured DNA aptamers to thrombin were examined. Two different approaches were used to improve stability, binding affinity and biological activity of a known thrombin-binding aptamer. These approaches are chemical modification and the addition of a duplex module to the aptamer core structure. Several chemically modified aptamers and the duplex-bearing ones were all studied under the same conditions by a set of widely known and some relatively new methods. A number of the thrombin-binding aptamer analogs have demonstrated improved characteristics. Most importantly, the study allowed us to compare directly the two approaches to aptamer optimization and to analyze their relative advantages and disadvantages as well as their potential in drug design and fundamental studies.

G4 Aptamers: Trends in Structural Design

Many potent DNA aptamers are known to contain a G-quadruplex (G4) core. Structures and applications of the majority of such aptamers have been reviewed previously. The present review focuses on the design and optimization of G4 aptamers. General features of bioactive G4s are analyzed, and the main strategies for construction of aptamers with desired properties and topologies, including modular assembly, control of an aptamer folding and some others, are outlined. Chemical modification as a method for post-SELEX G4 aptamer optimization is also discussed, and the effects of loop and core modifications are compared. Particular attention is paid to the emerging trends, such as the development of genomic G4- inspired aptamers and the combinatorial approaches which aim to find a balance between rational design and selection.

A new design for a green calcium indicator with a smaller size and a reduced number of calcium-binding sites

Genetically encoded calcium indicators (GECIs) are mainly represented by two- or one-fluorophore-based sensors. One type of two-fluorophore-based sensor, carrying Opsanus troponin C (TnC) as the Ca2+-binding moiety, has two binding sites for calcium ions, providing a linear response to calcium ions. One-fluorophore-based sensors have four Ca2+-binding sites but are better suited for in vivo experiments. Herein, we describe a novel design for a one-fluorophore-based GECI with two Ca2+-binding sites. The engineered sensor, called NTnC, uses TnC as the Ca2+-binding moiety, inserted in the mNeonGreen fluorescent protein. Monomeric NTnC has higher brightness and pH-stability in vitro compared with the standard GECI GCaMP6s. In addition, NTnC shows an inverted fluorescence response to Ca2+. Using NTnC, we have visualized Ca2+ dynamics during spontaneous activity of neuronal cultures as confirmed by control NTnC and its mutant, in which the affinity to Ca2+ is eliminated. Using whole-cell patch clamp, we have demonstrated that NTnC dynamics in neurons are similar to those of GCaMP6s and allow robust detection of single action potentials. Finally, we have used NTnC to visualize Ca2+ neuronal activity in vivo in the V1 cortical area in awake and freely moving mice using two-photon microscopy or an nVista miniaturized microscope.

A Universal Base in a Specific Role: Tuning up a Thrombin Aptamer with 5-Nitroindole

In this study we describe new modified analogs of the thrombin binding aptamer (TBA) containing 5-nitroindole residues. It has been shown that all modified TBAs form an anti-parallel G-quadruplex structure and retain the ability to inhibit thrombin. The most advanced TBA variant (TBA-N8) has a substantially increased clotting time and two-fold lower IC50 value compared to the unmodified prototype. Molecular modelling studies suggest that the improved anticoagulant properties of TBA-N8 result from changes in the binding mode of the analog. A modified central loop in TBA-N8 is presumed to participate in the binding of the target protein. Studies of FAM labelled TBA and TBA-N8 showed an improved binding affinity of the modified aptamer and provided evidence of a direct interaction between the modified central loop and thrombin. Our findings have implications for the design of new aptamers with improved binding affinities.

Anomeric DNA quadruplexes

Thrombin-binding aptamer (TBA) is a 15-nt DNA oligomer that efficiently inhibits thrombin. It has been shown that TBA folds into an anti-parallel unimolecular G-quadruplex. Its three-dimensional chair-like structure consists of two G-tetrads connected by TT and TGT loops. TBA undergoes fast degradation by nucleases in vivo. To improve the nuclease resistance of TBA, a number of modified analogs have been proposed. Here, we describe anomeric modifications of TBA. Non-natural α anomers were used to replace selected nucleotides in the loops and core. Significant stabilization of the quadruplex was observed for the anomeric modification of TT loops at T4 and T13. Replacement of the core guanines either prevents quadruplex assembly or induces rearrangement in G-tetrads. It was found that the anticoagulant properties of chimeric aptamers could be retained only with intact TT loops. On the contrary, modification of the TGT loop was shown to substantially increase nuclease resistance of the chimeric aptamer without a notable disturbance of its anticoagulant activity.

Green fluorescent genetically encoded calcium indicator based on calmodulin/M13-peptide from fungi

Currently available genetically encoded calcium indicators (GECIs) utilize calmodulins (CaMs) or troponin C from metazoa such as mammals, birds, and teleosts, as calcium-binding domains. The amino acid sequences of the metazoan calcium-binding domains are highly conserved, which may limit the range of the GECI key parameters and cause undesired interactions with the intracellular environment in mammalian cells. Here we have used fungi, evolutionary distinct organisms, to derive CaM and its binding partner domains and design new GECI with improved properties. We applied iterative rounds of molecular evolution to develop FGCaMP, a novel green calcium indicator. It includes the circularly permuted version of the enhanced green fluorescent protein (EGFP) sandwiched between the fungal CaM and a fragment of CaM-dependent kinase. FGCaMP is an excitation-ratiometric indicator that has a positive and an inverted fluorescence response to calcium ions when excited at 488 and 405 nm, respectively. Compared with the GCaMP6s indicator in vitro, FGCaMP has a similar brightness at 488 nm excitation, 7-fold higher brightness at 405 nm excitation, and 1.3-fold faster calcium ion dissociation kinetics. Using site-directed mutagenesis, we generated variants of FGCaMP with improved binding affinity to calcium ions and increased the magnitude of FGCaMP fluorescence response to low calcium ion concentrations. Using FGCaMP, we have successfully visualized calcium transients in cultured mammalian cells. In contrast to the limited mobility of GCaMP6s and G-GECO1.2 indicators, FGCaMP exhibits practically 100% molecular mobility at physiological concentrations of calcium ion in mammalian cells, as determined by photobleaching experiments with fluorescence recovery. We have successfully monitored the calcium dynamics during spontaneous activity of neuronal cultures using FGCaMP and utilized whole-cell patch clamp recordings to further characterize its behavior in neurons. Finally, we used FGCaMP in vivo to perform structural and functional imaging of zebrafish using wide-field, confocal, and light-sheet microscopy.

The systematic approach to describing conformational rearrangements in G-quadruplexes

Conformational changes in DNA G-quadruplex (GQ)-forming regions affect genome function and, thus, compose an interesting research topic. Computer modelling may yield insight into quadruplex folding and rearrangement, particularly molecular dynamics simulations. Here, we show that specific parameters, which are distinct from those commonly used in DNA conformational analyses, must be introduced for adequate interpretation and, most importantly, convenient visual representation of the quadruplex modelling results. We report a set of parameters that comprehensively and systematically describe GQ geometry in dynamics. The parameters include those related to quartet planarity, quadruplex twist, and quartet stacking; they are used to quantitatively characterise various types of quadruplexes and rearrangements, such as quartet distortion/disruption or deviation/bulging of a single nucleotide from the quartet plane. Our approach to describing conformational changes in quadruplexes using the new parameters is exemplified by telomeric quadruplex rearrangement, and the benefits of applying this approach to analyse other structures are discussed.

DNA complexes with Ni nanoparticles: structural and functional properties

Supramolecular complexes of biopolymers based on magnetic nanoparticles play an important role in creation of biosensors, implementation of theragnostic and gene therapeutic methods and biosafety evaluation. We investigated the impact of DNA interactions with nanoparticles of nickel (nNi) on the integrity and functionality of DNA. Data obtained by mass spectrometry, electrophoresis, TEM and AFM microscopy techniques, bacterial transformation, and real-time PCR provide evidence that ssDNA and plasmid DNA (pDNA) efficiently form complexes with nNi. AFM data suggest that the complexes are necklace-type structures, in which nanoparticles are randomly distributed along the DNA chains, rather than highly entangled clot-type structures. After desorption, observed DNA characteristics in bioanalytical and biological systems remain unchanged. Only supercoiled pDNA was nicked, but remained, as well as a plasmid–nNi complex, active in expression vector assays. These results are very important for creation of new methods of DNA immobilization and controlled manipulation.

i-Clamp phenoxazine for the fine tuning of DNA i-motif stability

Abstract Non-canonical DNA structures are widely used for regulation of gene expression, in DNA nanotechnology and for the development of new DNA-based sensors. I-motifs (iMs) are two intercalated parallel duplexes that are held together by hemiprotonated C-C base pairs. Previously, iMs were used as an accurate sensor for intracellular pH measurements. However, iM stability is moderate, which in turn limits its in vivo applications. Here, we report the rational design of a new substituted phenoxazine 2′-deoxynucleotide (i-clamp) for iM stabilization. This residue contains a C8-aminopropyl tether that interacts with the phosphate group within the neighboring chain without compromising base pairing. We studied the influence of i-clamp on pH-dependent stability for intra- and intermolecular iM structures and found the optimal positions for modification. Two i-clamps on opposite strands provide thermal stabilization up to 10–11°C at a pH of 5.8. Thus, we developed a new modification that shows significant iM-stabilizing effect both at strongly and mildly acidic pH and increases iM transition pH values. i-Clamp can be used for tuning iM-based pH probes or assembling extra stable iM structures for various applications.