Geoffrey W. Nelson

Chemical mechanical polishing of thin film diamond

The demonstration that Nanocrystalline Diamond (NCD) can retain the superior Young’s modulus (1100 GPa) of single crystal diamond twinned with its ability to be grown at low temperatures (<450 °C) has driven a revival into the growth and applications of NCD thin films. However, owing to the competitive growth of crystals the resulting film has a roughness that evolves with film thickness, preventing NCD films from reaching their full potential in devices where a smooth film is required. To reduce this roughness, films have been polished using Chemical Mechanical Polishing (CMP). A Logitech Tribo CMP tool equipped with a polyurethane/polyester polishing cloth and an alkaline colloidal silica polishing fluid has been used to polish NCD films. The resulting films have been characterised with Atomic Force Microscopy, Scanning Electron Microscopy and X-ray Photoelectron Spectroscopy. Root mean square roughness values have been reduced from 18.3 nm to 1.7 nm over 25 μm2, with roughness values as low as 0.42 nm over ∼0.25 μm2. A polishing mechanism of wet oxidation of the surface, attachment of silica particles and subsequent shearing away of carbon has also been proposed.

Carbon nanoparticle surface functionalisation: converting negatively charged sulfonate to positively charged sulfonamide.

The surface functionalities of commercial sulfonate-modified carbon nanoparticles (ca. 9-18 nm diameter, Emperor 2000) have been converted from negatively charged to positively charged via sulfonylchloride formation followed by reaction with amines to give suphonamides. With ethylenediamine, the resulting positively charged carbon nanoparticles exhibit water solubility (in the absence of added electrolyte), a positive zeta-potential, and the ability to assemble into insoluble porous carbon films via layer-by-layer deposition employing alternating positive and negative carbon nanoparticles. Sulfonamide-functionalised carbon nanoparticles are characterised by Raman, AFM, XPS, and voltammetric methods. Stable thin film deposits are formed on 3 mm diameter glassy carbon electrodes and cyclic voltammetry is used to characterise capacitive background currents and the adsorption of the negatively charged redox probe indigo carmine. The Langmuirian binding constant K = 4000 mol(-1)dm(3) is estimated and the number of positively charged binding sites per particle determined as a function of pH.

Elucidating the deprotonation of polyaniline films by X-ray photoelectron spectroscopy

Spin-coated polyaniline (PANI) thin films can be made conductive following treatment with a dopant (reducing or oxidising agent). However, de-doping results in loss of electrical properties. We chemically doped PANI films using p-toluene sulfonic acid (pTSA) and camphor sulfonic acid (CSA) and examined their ability to retain these dopants and their conductive properties in physiological media. Changes in the protonation level of these films were assessed by N 1s core line spectra in X-ray photoelectron spectroscopy (XPS). PANI films were found to de-dope with a decrease in the ratio of N 1s photoelectron signal corresponding to positively charged nitrogen (i.e. –NH2+, NH+) to the total N 1s signal. De-doping of PANI films was confirmed by depletion of the dopant fragment (–SO3−) as determined from both XPS and atomic distribution in Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) images. XPS has been successfully used as a tool to elucidate the deprotonation of PANI films and the loss of the dopant from the bulk.

Hydrothermal conversion of one-photon-fluorescent poly-(4-vinylpyridine) into two-photon-fluorescent carbon nanodots

A novel two-photon-fluorescent N,O-heteroatom-rich carbon nanomaterial has been synthesized and characterized. The new carbon nanoparticles were produced by hydrothermal conversion from a one-photon-fluorescent poly(4-vinylpyridine) precursor (P4VP). The carbonized particles (cP4VP dots) with nonuniform particle diameter (ranging from sub-6 to 20 nm with some aggregates up to 200 nm) exhibit strong fluorescence properties in different solvents and have also been investigated for applications in cell culture media. The cP4VP dots retain their intrinsic fluorescence in a cellular environment and exhibit an average excited-state lifetime of 2.0 ± 0.9 ns in the cell. The cP4VP dots enter HeLa cells and do not cause significant damage to outer cell membranes. They provide one-photon or two-photon fluorescent synthetic scaffolds for imaging applications and/or drug delivery.

A conducting polymer with enhanced electronic stability applied in cardiac models

Researchers develop sutureless conductive patch with enhanced biostability and effect on heart conduction velocity. Electrically active constructs can have a beneficial effect on electroresponsive tissues, such as the brain, heart, and nervous system. Conducting polymers (CPs) are being considered as components of these constructs because of their intrinsic electroactive and flexible nature. However, their clinical application has been largely hampered by their short operational time due to a decrease in their electronic properties. We show that, by immobilizing the dopant in the conductive scaffold, we can prevent its electric deterioration. We grew polyaniline (PANI) doped with phytic acid on the surface of a chitosan film. The strong chelation between phytic acid and chitosan led to a conductive patch with retained electroactivity, low surface resistivity (35.85 ± 9.40 kilohms per square), and oxidized form after 2 weeks of incubation in physiological medium. Ex vivo experiments revealed that the conductive nature of the patch has an immediate effect on the electrophysiology of the heart. Preliminary in vivo experiments showed that the conductive patch does not induce proarrhythmogenic activities in the heart. Our findings set the foundation for the design of electronically stable CP-based scaffolds. This provides a robust conductive system that could be used at the interface with electroresponsive tissue to better understand the interaction and effect of these materials on the electrophysiology of these tissues.

Cellulose-Derived Supercapacitors from the Carbonisation of Filter Paper

Advanced carbon materials are important for the next-generation of energy storage apparatus, such as electrochemical capacitors. Here, the physical and electrochemical properties of carbonised filter paper (FP) were investigated. FP is comprised of pure cellulose and is a standardised material. After carbonisation at temperatures ranging from 600 to 1700 °C, FP was contaminant-free, containing only carbon and some oxygenated species, and its primary fibre structure was retained (diameter ≈20–40 μm). The observed enhancement in conductivity of the carbonised FP was correlated with the carbonisation temperature. Electrochemical capacitance in the range of ≈1.8–117 F g−1 was achieved, with FP carbonised at 1500 °C showing the best performance. This high capacitance was stable with >87 % retained after 3000 charge–discharge cycles. These results show that carbonised FP, without the addition of composite materials, exhibits good supercapacitance performance, which competes well with existing electrodes made of carbon-based materials. Furthermore, given the lower cost and renewable source, cellulose-based materials are the more eco-friendly option for energy storage applications.

Novel Modifications to Carbon-Based Electrodes to Improve the Electrochemical Detection of Dopamine.

In this work, we describe three simple modifications to carbon electrodes that were found to improve the detection of an exemplar neurotransmitter (dopamine) in the presence of physiological interferents (ascorbic acid and/or uric acid). First, the electro-oxidation of ascorbic acid, as a pretreatment, at boron-doped diamond electrode (BDE) interfaces is studied. This treatment did suppress the detection of ascorbic acid oxidation signal, but only in a manner suitable for single-use detection of high concentrations of dopamine (i.e., > 1 μM). Second, the hydrogenation of BDE by electrochemical cathodic treatment and plasma hydrogenation was investigated. Large cathodic, applied potentials (i.e., > - 5 V) and hydrogen plasma pretreatment of BDE lead to the partial and complete oxidization of ascorbic acid before dopamine, respectively. The consequence at hydrogen-plasma treated BDE is the complete electrochemical separation of these two species without any typical catalytic reactions between the analytes. Third, the modification of glassy carbon electrodes with carbon black nanoparticles is explored. This modification enables the simultaneous detection of ascorbic acid, dopamine and uric acid, significantly enhancing the sensitivity of dopamine. Dopamine was best detected using the unconventional route of detecting 5,6-dihydroxyindole, which is made possible by use of carbon-black nanoparticles. The potential of all three studied modifications to be of electroanalytical use is highlighted throughout this work.

Surface Characterization and in situ Protein Adsorption Studies on Carbene-Modified Polymers.

Polystyrene thin films were functionalized using a facile two-step chemical protocol involving carbene insertion followed by azo-coupling, permitting the introduction of a range of chemical functional groups, including aniline, hexyl, amine, carboxyl, phenyl, phosphonate diester, and ethylene glycol. X-ray photoelectron spectroscopy (XPS) confirmed the success of the two-step chemical modification with a grafting density of at least 1/10th of the typical loading density (10(14)-10(15)) of a self-assembled monolayer (SAM). In situ, real-time quartz crystal microbalance with dissipation (QCM-D) studies show that the dynamics of binding of bovine serum albumin (BSA) are different at each modified surface. Mass, viscoelastic, and kinetic data were analyzed, and compared to cheminformatic descriptors (i.e., c log P, polar surface area) typically used for drug discovery. Results show that functionalities may either resist or adsorb BSA, and uniquely influence its adsorption dynamics. It is concluded that carbene-based surface modification can usefully influence BSA binding dynamics in a manner consistent with, and more robust than, traditional systems based on SAM chemistry.

Electrochemical recycling of lead from hybrid organic–inorganic perovskites using deep eutectic solvents

The emerging field of lead-based hybrid organic–inorganic perovskite (HOIP) photovoltaic devices has attracted a great deal of attention due to their very high conversion efficiencies and straightforward fabrication methods. Unfortunately, a major obstacle to commercialization remains the high toxicity of lead. Whilst to date the focus has been on understanding and improving device performance, there has been no reported effort to develop methods to recover and recycle the lead from these materials. In this work we demonstrate a simple, low-cost and environmentally friendly method of recycling lead from HOIP photovoltaics by dissolution and selective electrodeposition using a deep eutectic solvent. We demonstrate that up to 99.8% of the lead is removed from the solvent. The results presented here provide a viable solution to lead-based HOIP photovoltaic recycling, and also open the possibility for providing an alternative method to conventional smelting in the recovery and recycling of different lead-based energy materials.

Polymers of intrinsic microporosity as high temperature templates for the formation of nanofibrous oxides

The highly rigid molecular structure of Polymers of Intrinsic Microporosity (PIM) – associated with a high thermolysis threshold – combined with the possibility to fill intrinsic micropores allows the direct “one-step” templated conversion of metal nitrates into nano-structured metal oxides. This is demonstrated here with PIM-EA-TB and with PIM-1 for the conversion of Pr(NO3)3 to Pr6O11.