Gerard Śliwiński

Properties of plasmonic arrays produced by pulsed-laser nanostructuring of thin Au films

Summary A brief description of research advances in the area of short-pulse-laser nanostructuring of thin Au films is followed by examples of experimental data and a discussion of our results on the characterization of structural and optical properties of gold nanostructures. These consist of partially spherical or spheroidal nanoparticles (NPs) which have a size distribution (80 ± 42 nm) and self-organization characterized by a short-distance order (length scale ≈140 nm). For the NP shapes produced, an observably broader tuning range (of about 150 nm) of the surface plasmon resonance (SPR) band is obtained by renewal thin film deposition and laser annealing of the NP array. Despite the broadened SPR bands, which indicate damping confirmed by short dephasing times not exceeding 4 fs, the self-organized Au NP structures reveal quite a strong enhancement of the optical signal. This was consistent with the near-field modeling and micro-Raman measurements as well as a test of the electrochemical sensing capability.

Nanostructuring of thin Au films by means of short UV laser pulses

The particle size distribution, morphology and optical properties of the Au nanoparticle (NP) structures for surface enhanced Raman signal (SERS) application are investigated in dependence on their preparation conditions. The structures are produced from relatively thin Au films (10–20 nm) sputtered on fused silica glass substrate and irradiated with several pulses (6 ns) of laser radiation at 266 nm and at fluencies in the range of 160–412 mJ/cm2. The SEM inspection reveals nearly homogeneously distributed, spherical gold particles. Their initial size distribution of the range of 20–60 nm broadens towards larger particle diameters with prolonged irradiation. This is accompanied by an increase in the uncovered surface of the glass substrate and no particle removal is observed. In the absorption profiles of the nanostructures, the broad peak centred at 546 nm is ascribed to resonant absorption of surface plasmons (SPR). The peak position, halfwidth and intensity depend on the shape, size and size distribution of the nanostructured particles in agreement with literature. From peak intensities of the Raman spectra recorded for Rhodamine 6G in the range of 300–1800 cm−1, the relative signal enhancement by factor between 20 and 603 for individual peaks is estimated. The results confirm that the obtained structures can be applied for SERS measurements and sensing.

Fs-laser processing of polydimethylsiloxane

We present an experimental analysis on surface structuring of polydimethylsiloxane films with UV (263 nm) femtosecond laser pulses, in air. Laser processed areas are analyzed by optical microscopy, SEM, and μ-Raman spectroscopy. The laser-treated sample shows the formation of a randomly nanostructured surface morphology. μ-Raman spectra, carried out at both 514 and 785 nm excitation wavelengths, prior and after laser treatment allow evidencing the changes in the sample structure. The influence of the laser fluence on the surface morphology is studied. Finally, successful electro-less metallization of the laser-processed sample is achieved, even after several months from the laser-treatment contrary to previous observation with nanosecond pulses. Our findings address the effectiveness of fs-laser treatment and chemical metallization of polydimethylsiloxane films with perspective technological interest in micro-fabrication devices for MEMS and nano-electromechanical systems.

Interfacial Properties of Organic Semiconductor-Inorganic Magnetic Oxide Hybrid Spintronic Systems Fabricated Using Pulsed Laser Deposition.

We report fabrication of a hybrid organic semiconductor-inorganic complex oxide interface of rubrene and La0.67Sr0.33MnO3 (LSMO) for spintronic devices using pulsed laser deposition (PLD) and investigate the interface structure and chemical bonding-dependent magnetic properties. Our results demonstrate that with proper control of growth parameters, thin films of organic semiconductor rubrene can be deposited without any damage to the molecular structure. Rubrene, a widely used organic semiconductor with high charge-carrier mobility and spin diffusion length, when grown as thin films on amorphous and crystalline substrates such as SiO2-glass, indium-tin oxide (ITO), and LSMO by PLD at room temperature and a laser fluence of 0.19 J/cm2, reveals amorphous structure. The Raman spectra verify the signatures of both Ag and Bg Raman active modes of rubrene molecules. X-ray reflectivity measurements indicate a well-defined interface formation between surface-treated LSMO and rubrene, whereas X-ray photoelectron spectra indicate the signature of hybridization of the electronic states at this interface. Magnetic measurements show that the ferromagnetic property of the rubrene-LSMO interface improves by >230% compared to the pristine LSMO surface due to this proposed hybridization. Intentional disruption of the direct contact between LSMO and rubrene by insertion of a dielectric AlOx layer results in an observably decreased ferromagnetism. These experimental results demonstrate that by controlling the interface formation between organic semiconductor and half-metallic oxide thin films, it is possible to engineer the interface spin polarization properties. Results also confirm that by using PLD for consecutive growth of different layers, contamination-free interfaces can be obtained, and this finding is significant for the well-controlled and reproducible design of spin-polarized interfaces for future hybrid spintronics devices.

Raman spectroscopic signatures of the yellow and ochre paints from artist palette of J. Matejko (1838–1893)

The Raman and complementary spectroscopic analyses were performed using the exceptional possibility of research on the XIX c. original paint materials of the artist palette of J. Matejko stored in the National Museum in Cracow. The yellow and ochre-based paints characteristic for Matejkos workshop and selected from the ensemble of 273 labelled tubes (brand of R. Ainé/Paris) supplied during the period of 1880-1893 were investigated. Highly specific Raman spectra were obtained for paints containing mixtures of the Zn- and Sn-modified Pb-Sb pigment, and also for the ochre-based ones. A clear pigment discrimination of the mixture of cadmium yellow (CdS), cinnabar (HgS) and lead white (2PbCO3⋅Pb(OH)2) was possible by means of Raman data collected under different excitations at 514 nm and 785 nm. It was shown that the Raman spectra complemented by the XRF, SEM-EDX and in some cases also by the LIPS and FTIR data ensure reliable pigment identification in multi-component paints containing secondary species and impurities. The reported spectral signatures will be used for non-destructive investigation of the collection of about 300 oil paintings of J. Matejko. In view of the comparative research on polish painting which point out that richness of modified Naples yellows clearly distinguish Matejkos artworks from other ones painted in the period of 1850-1883, the Raman data of these paints can provide support in the authentication studies.

Ordered titanium templates functionalized by gold films for biosensing applications – Towards non-enzymatic glucose detection

Recently, metal nanostructures evoke much interest due to application potential in highly sensitive detectors in biochemistry and medical diagnostics. In this work we report on preparation and characteristics of thin (1-100nm) Au films deposited onto highly ordered structured titanium templates for SERS (Surface Enhanced Raman Spectroscopy) and electrochemical sensing. The Ti templates are formed by selective removal of TiO2 nanotubes out of as-anodized titanium substrate. The surface of the obtained material reproduce precisely the bottom layer of the nanotubes and consists of a uniformly distributed dimples with diameter of ~100nm. For all structures covered with Au films the measured average SERS signal is markedly higher than the one observed for bare Ti templates. This is due to strong electromagnetic field in the vicinity of the film grains. Moreover, such nanostructured gold surface exhibits also attractive electrochemical and electrocatalytic properties, which should be attributed to enhancement of the electron transfer at the Au-Ti interface formed without any linker molecules. It is shown that prepared material can be used as an enzyme-free sensor for glucose detection in air-saturated neutral media especially in case of low sugar concentrations present in human body liquids, such as saliva, sweat and interstitial fluid.

Preparation of porous TiO2 films by means of pulsed laser deposition for photocatalytic applications

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP

Laser cleaning of historical sandstone and the surface discoloration due to gas shielding

For the Gotlandic sandstone samples extracted from historical monuments and covered with model encrustation the effect of pulsed, ablative laser cleaning at 1064 nm on the surface discoloration was investigated for the irradiation in ambient air and in the N2 flow at various velocities. The colorimetric data of a sufficiently large sample population were measured. A slightly stronger decrease in the surface lightness for the artificially coated and also pure substrate samples irradiated in nitrogen compared to the ambient air case were observed. This difference was ascribed to material oxidation and partial combustion of surface remnants due to presence of O2 contributing to the final effect of laser cleaning.

Structure and optical properties of TiO2 thin films prepared by pulsed laser deposition

Thin TiO2 films prepared by pulsed laser deposition (PLD) in the O2 gas ambient using the bulk metal Ti or pressed TiO2 powder targets were characterized using spectroscopic methods. Films were deposited on SiO2 (001) and SiO2 glass substrates heated up to 300 °C. The deposition process was investigated at laser fluencies from the range of 1 – 3 J/cm2 and at oxygen pressure of 0.1 – 3.2 Pa. The μ-Raman and X-ray diffraction (XRD) spectra of the TiO2 films revealed consistently both the anatase and rutile crystalline phases and a strong dependence of the phase content ratio on target material and deposition conditions. The range of crystallite size determined from XRD bandwidths was between (2-30) nm and (6-14) nm for anatase and rutile, respectively. The film thickness values between 0.74 and 1.65 μm depending on the deposition time were obtained from the transmittance and ellipsometric measurements. Values of the band gap of 3.5-4.1 eV derived from absorption spectra were higher than that of 3.2 eV corresponding to anatase and this difference was ascribed to the relatively small size of the anatase crystallites and presence of rutile, too. The SEM images of films produced under similar conditions from Ti and TiO2 targets revealed porous structures. The highest anatase content was observed for films deposited by ablation of the TiO2 target at moderate laser fluencies below 2 J/cm2 and at oxygen pressure around 1.9 Pa.

Laser Cleaning Monitored by a Spectroscopic Technique — Experimental Data on The Gotlandic Sandstone Case

The LIPS spectra obtained for the historical samples of Gotlandic sandstone (XVI c) under pulsed laser irradiation at 355 and 1064nm are analysed and applied for monitoring of the surface cleaning process. The spectra are recorded in the range 370 – 760nm upon successive cleaning pulses and depend strongly on the laser wavelength and dose applied. Peaks assigned to Ca I, Ca II, Al I, Ba I, Li I and Mg I (crust) and to Si I, Si II and Al II (stone) are observed. An exponential decay of the Ca I, Ca II and Al I peak intensities accompanies the cleaning progress. The short term colour changes of the sandstone surface due to laser irradiation are not revealed by colorimetric measurements.