Go Inokuchi

Stature estimation in Japanese cadavers using the sacral and coccygeal length measured with multidetector computed tomography

We evaluated the relationship between stature and the length of the sacrum and coccyx using multidetector computed tomography (MDCT) and derived regression equations for stature estimation in the modern Japanese population. Two hundred and sixteen Japanese subjects (110 males and 106 females) who underwent postmortem computed tomography with subsequent forensic autopsy between January 2010 and August 2013 were measured. A sagittal-plane image of the sacrum and coccyx was used. Anterior sacral length (ASL) was defined as the linear distance from the anterosuperior edge of the first sacral vertebra (S1) to the anteroinferior edge of the fifth sacral vertebra (S5), and posterior sacral length (PSL) was defined as the linear distance from the posterosuperior edge of S1 to the anteroinferior edge of S5. Anterior sacrococcygeal length (ASCL) was defined as the linear distance from the anterosuperior edge of S1 to the anteroinferior edge of the last coccygeal vertebra (LCV), and posterior sacrococcygeal length (PSCL) was defined as the linear distance from the posterosuperior edge of S1 to the anteroinferior edge of the LCV. The correlation between stature and each parameter was evaluated by simple regression analysis using Pearson product-moment correlation coefficients. Each parameter was significantly and positively correlated with stature among both males and females. Cadaver stature (CS, cm)=0.39×PSL (mm)+123.70 [Corrected] provided the most accurate stature prediction (R=0.507, SEE=5.83 cm) in males. CS (cm)=0.56×PSCL (mm)+85.29 provided the most accurate stature prediction (R=0.659, SEE=6.68 cm) in females. We conclude that sacral/sacrococcygeal length measured with MDCT is a potentially useful tool for stature estimation, particularly in cases where better predictors such as the long bones are not available.

Stature estimation in Japanese cadavers based on pelvic measurements in three-dimensional multidetector computed tomographic images.

The aim of this study was to examine the feasibility of stature estimation by measuring the pelvic bones of Japanese cadavers using three-dimensional (3D) computed tomography (CT). We assessed 3D reconstructed images of 210 Japanese subjects (108 males, 102 females) who had undergone postmortem CT between May 2011 and November 2013. We defined the linear distance from the anterosuperior margin of the left and right anterior superior iliac spines (ASIS) to the posterior margin of the left and right ischial spines as the LSS and RSS, respectively. We also defined the linear distance from the anterosuperior margin of the left and right ASIS to the anteroinferior margin of the left and right ischial tuberosities as the LST and RST, respectively. The correlation between the cadaver stature (CS) and each parameter (LSS, LST, RSS, and RST) was evaluated using Pearson product–moment correlation coefficients and regression analysis was performed for stature estimation. All four parameters correlated significantly with stature independent of sex, suggesting that they can be used as a tool for stature estimation. The LST had the closest correlation with stature in both sexes.

Age estimation by multidetector CT images of the sagittal suture

Closure of cranial sutures progresses with age; therefore, macroscopic assessment of cranial sutures has been used as one method of age estimation. Postmortem computed tomography (PMCT), which many forensic medical departments and institutes have begun to adopt, has the potential to simplify the gathering of information from cranial sutures for both surface and cross-sectional evaluation. To examine the feasibility of age estimation by cross-sectional multidetector computed tomography images of the sagittal suture, PMCT findings of 125 subjects of known age and sex were retrospectively reviewed. The sagittal suture was divided into four segments, and 20 cross-sectional slices from each segment were analyzed. These slices were each categorized by visual evaluation into one of the seven stages defined by Harth et al. according to the degree of closure. The mean stage value of 20 slices was calculated for each segment. We were able to evaluate cross-sectional images of the sagittal suture by PMCT, and a positive correlation between age and closure degree was observed. Despite the prediction interval achieved with this method not being superior to traditional macroscopic or flat-panel CT assessment, multidetector CT is a potentially useful tool, in conjunction with other methods, for age estimation, particularly in adult females and in cases where only a skull is the sole remain.

Stature estimation based on radial and ulnar lengths using three-dimensional images from multidetector computed tomography in a Japanese population

The aim of our study was to evaluate correlations between cadaver stature (CS) and radial and ulnar lengths based on three-dimensional (3D) computed tomography (CT) images, and to develop modern regression equations for estimating CS in a Japanese population. Measurements were performed on 245 Japanese subjects (123 males and 122 females) who underwent postmortem CT between May 2011 and December 2013. A 3D reconstructed image was used for assessment. The linear distances of the left radial (LR) and right radial (RR) lengths were measured as a straight-line distance from the most anteroproximal point of the head to the most distal end of the styloid process. The linear distances of the left ulnar (LU) and right ulnar (RU) lengths were measured as a straight-line distance from the most posteroproximal point of the olecranon to the most distal end of the styloid process. The correlation between CS and each parameter (LR, LU, RR, and RU) was assessed using Pearson product-moment correlation coefficients and regression analysis was performed for stature estimation. There were significant correlations between CS and each parameter regardless of sex, indicating that the radial and ulnar lengths measured on 3D CT images can be predictive of stature estimation. Simple regression equations for stature estimation calculated from LR provided the lowest standard error of estimation (SEE) (all subjects, SEE=4.18 cm; males, SEE=4.09 cm; females, SEE=4.21 cm). In addition, multiple regression equations were more accurate and reliable than the single linear regression equations.

Age Estimation Based on Pulp Cavity to Tooth Volume Ratio Using Postmortem Computed Tomography Images

Pulp cavity size is known to decrease with age and can therefore serve as an indicator for age estimation. Here, we evaluated whether reconstructed images of multidetector‐row computed tomography (MDCT) acquired before forensic autopsy are useful for estimating age at death. Images of 136 mandibular first premolars obtained from bodies of known age at death were analyzed, and the volume of the regions corresponding to pulp cavity and that of the whole tooth were determined using a voxel counting function. The pulp cavity was clearly distinguishable from dental hard tissue on the reconstructed images when using a cutoff value of 1400 Hounsfield units. Regression analysis adjusted for sex showed that estimated age correlated significantly with the pulp cavity to tooth volume ratio (r = 0.76). MDCT is gaining more widespread use in forensic medicine, and analyzing dental images to obtain parameters for age prediction is a practical approach for postmortem identification.

Estimation of sex in Japanese cadavers based on sternal measurements using multidetector computed tomography

This study assessed the sex-discrimination potential of the sternum in a Japanese population using three-dimensional (3D) computed tomographic (CT) images. A total of 200 cadavers (100 males, 100 females) who underwent postmortem CT and subsequent forensic autopsy between December 2011 and June 2014 were used. Five measurements of each sternum were performed on 3D CT reconstructed images that extracted only bone data, and two sternal dimensions and three indices were calculated. Univariate discriminant function analyses using these linear measurements and calculated sternal dimensions and indices yielded sex classification accuracy rates of 62.5-84.0%, and 63.0-90.5%, respectively. The results of this study indicate that sternal measurements may be useful for the forensic assessment of sex in Japanese individuals, particularly in cases where better predictors, such as the pelvis or skull, are unavailable.

The utility of postmortem computed tomography selective coronary angiography in parallel with autopsy

Historically, coronary angiography of the isolated heart has played an important role in the detection of stenotic or occlusive lesions that are difficult to identify by autopsy alone. Meanwhile, although the application of multidetector computed tomography (MDCT) to forensic fields has accelerated recently, isolated single organ angiography with MDCT is rarely performed. In this article, we present an evaluation of postmortem selective coronary CT angiography of the isolated heart with MDCT and discuss its utility for autopsy. First, in a preliminary experiment using pig coronary artery, we examined the behavior of water soluble contrast material on postmortem computed tomography angiography (PMCTA) and found that better angiographic images were acquired when the viscosity of the contrast material was increased and CT was performed under conditions of sustained perfusion. Based on these results, we devised a selective coronary angiography procedure using a pressurized bag for drip infusion that can be performed easily, quickly, and at low cost. The angiographic images obtained provided useful supportive evidence of autopsy findings suggestive of ischemic heart disease. With active discussions underway in forensic fields on the proper use of postmortem computed tomography, PMCTA has also naturally attracted attention as it compensates for some of the shortcomings of CT alone. Although PMCTA typically involves whole-body angiography, if we view PMCTA as one of the many useful and supplementary tools available for autopsy, then isolated heart angiography continues to have utility in autopsy today.

Morphometric analysis of sex differences in contemporary Japanese pelves using multidetector computed tomography

Sex estimation of decomposed or skeletal remains is clearly important in forensic contexts. Recently, contemporary population-specific data has been obtained using multidetector computed tomography (MDCT) scanning. The main purpose of this study was to investigate skeletal pelvic dimorphism in a contemporary Japanese forensic sample and to quantify the accuracy of sex estimation using various pelvic measurements obtained from three-dimensional (3D) CT images. This study used a total of 208 cadavers (104 males, 104 females) of which postmortem CT scanning and subsequent forensic autopsy were conducted between December 2011 and August 2014. Eleven measurements of each pelvis were obtained from 3D CT reconstructed images that extracted only bone data. The measurements were analyzed using descriptive statistics and discriminant function analyses. All except one measurement were dimorphic in terms of sex differences. Univariate discriminant function analyses using these measurements provided sex classification accuracy rates of 62.0-98.1%. The subpubic angle was found to contribute most significantly to accurate sex estimation. Multivariate discriminant functions yielded sex prediction accuracy rates of 63.9-98.1%. In conclusion, the pelvic measurements obtained from 3D CT images of a contemporary Japanese population successfully demonstrated sexual dimorphism and may be useful for the estimation of skeletal sex in the field of forensic anthropology.

Effects of the freezing and thawing process on biomechanical properties of the human skull.

The aim of this study was to determine if biomechanical investigations of skull samples are reliable after skulls have been subjected to a freezing and thawing process. The skulls were obtained from 105 Japanese cadavers (66 males, 39 females) of known age that were autopsied in our department between October 2012 and June 2013. We obtained bone specimens from eight sites (four bilaterally symmetrical pairs) of each skull and measured the mass of each specimen. They were then classified into three groups (A, B, C) based on the duration of freezing of the experimental samples. The left-side samples were subjected to frozen storage (experimental group). The corresponding right-side samples were their controls. Bending tests were performed on the controls immediately after they were obtained. The experimental samples were preserved by refrigeration at -20 °C for 1 day (group A), 1 month (group B), or 3 months (group C). Following refrigeration, these samples were placed at 37 °C to thaw for 1 h and then were subjected to bending tests using a three-point-bending apparatus attached to a Handy force gauge. The device recorded the fracture load automatically when the specimen fractured. Statistical analyses revealed that there were no significant differences in sample fracture loads between the frozen preserved/thawed samples and the unfrozen controls for each of the cryopreservation intervals. We eliminated any possible sample mass bias by using controls from the same skull in each case. The results suggest that the freezing/thawing process has little effect on the mechanical properties of human skulls. Thus, frozen storage for up to 3 months is a good method for preserving human skulls.

Age estimation by quantitative features of pubic symphysis using multidetector computed tomography

Macroscopic assessment of the pubic symphysis is commonly used for age estimation because its surface changes over time. However, postmortem computed tomography (PMCT), a method several forensic medical departments and institutes have begun to adopt, has the potential to simplify the information gathering process from the pelvic bone without requiring soft tissue removal. Some studies have previously evaluated the use of three-dimensional images of the pubic symphysis, but because of variance in the graphics processing among image analysis software packages, certain differences have been observed between these studies. Therefore, in this study, the PMCT findings of 199 subjects of known age and sex were retrospectively reviewed to examine the feasibility of age estimation using planar images of the pubic bones and soft tissue. The coronal and axial sectional images were observed at the center of the symphyseal surface, and the pubic bone length and thickness of the connective tissue of the pubic symphysis were measured at each slice. Our results revealed a significant positive correlation between the length of the pubic bone of the coronal section and age, suggesting that the use of a cutoff value for pubic bone length might be feasible for age estimations. In addition, the thickness of the connective tissue tended to narrow over time. Although the prediction interval range of planar images obtained by PMCT was major and is not usable in practice at this moment, it may still be a useful tool if used in conjunction with other findings obtained by PMCT.