Yohsuke Makino

Estimation of sex in Japanese cadavers based on sternal measurements using multidetector computed tomography

This study assessed the sex-discrimination potential of the sternum in a Japanese population using three-dimensional (3D) computed tomographic (CT) images. A total of 200 cadavers (100 males, 100 females) who underwent postmortem CT and subsequent forensic autopsy between December 2011 and June 2014 were used. Five measurements of each sternum were performed on 3D CT reconstructed images that extracted only bone data, and two sternal dimensions and three indices were calculated. Univariate discriminant function analyses using these linear measurements and calculated sternal dimensions and indices yielded sex classification accuracy rates of 62.5-84.0%, and 63.0-90.5%, respectively. The results of this study indicate that sternal measurements may be useful for the forensic assessment of sex in Japanese individuals, particularly in cases where better predictors, such as the pelvis or skull, are unavailable.

Morphometric analysis of sex differences in contemporary Japanese pelves using multidetector computed tomography

Sex estimation of decomposed or skeletal remains is clearly important in forensic contexts. Recently, contemporary population-specific data has been obtained using multidetector computed tomography (MDCT) scanning. The main purpose of this study was to investigate skeletal pelvic dimorphism in a contemporary Japanese forensic sample and to quantify the accuracy of sex estimation using various pelvic measurements obtained from three-dimensional (3D) CT images. This study used a total of 208 cadavers (104 males, 104 females) of which postmortem CT scanning and subsequent forensic autopsy were conducted between December 2011 and August 2014. Eleven measurements of each pelvis were obtained from 3D CT reconstructed images that extracted only bone data. The measurements were analyzed using descriptive statistics and discriminant function analyses. All except one measurement were dimorphic in terms of sex differences. Univariate discriminant function analyses using these measurements provided sex classification accuracy rates of 62.0-98.1%. The subpubic angle was found to contribute most significantly to accurate sex estimation. Multivariate discriminant functions yielded sex prediction accuracy rates of 63.9-98.1%. In conclusion, the pelvic measurements obtained from 3D CT images of a contemporary Japanese population successfully demonstrated sexual dimorphism and may be useful for the estimation of skeletal sex in the field of forensic anthropology.

Stature estimation from skull measurements using multidetector computed tomographic images: A Japanese forensic sample

The aim of this study was to assess the correlation between stature and cranial measurements in a contemporary Japanese population, using three-dimensional (3D) computed tomographic (CT) images. A total of 228 cadavers (123 males, 105 females) underwent postmortem CT scanning and subsequent forensic autopsy between May 2011 and April 2015. Five cranial measurements were taken from 3D CT reconstructed images that extracted only cranial data. The correlations between stature and each of the cranial measurements were assessed with Pearson product-moment correlation coefficients. Simple and multiple regression analyses showed significant correlations between stature and cranial measurements. In conclusion, cranial measurements obtained from 3D CT images may be useful for forensic estimation of the stature of Japanese individuals, particularly in cases where better predictors, such as long bones, are not available.

Sex estimation based on scapula analysis in a Japanese population using multidetector computed tomography

Accurate sex estimation based on measurements of dimorphic dimensions in human unknown remains is important as the first step toward making individual identification. The purpose of this study was to assess the sexual dimorphism of the scapula and to quantify the accuracy of sex estimation in a contemporary Japanese forensic sample using scapular measurements based on three-dimensional (3D) computed tomographic (CT) images. A total of 218 cadavers (109 males, 109 females) that underwent postmortem CT and subsequent forensic autopsy were used. Ten scapular measurements were performed on 3D CT reconstructed images that extracted only bone data, and were analyzed using descriptive statistics and discriminant function analyses (DFA). All measurements were dimorphic in terms of sex differences. Univariate DFA provided sex classification accuracy rates of 75.7-91.3%. Stepwise DFA yielded sex prediction accuracy rates of 93.1-94.5%. In conclusion, the scapular measurements using 3D CT images of a contemporary Japanese population may be useful for the estimation of skeletal sex in the field of forensic anthropology.

Sexual determination based on multidetector computed tomographic measurements of the second cervical vertebra in a contemporary Japanese population

Accurate sex estimation is important in forensic investigation to determine the identity of unknown individuals. The aim of this study was to investigate the accuracy of sex assessment based on measurements of the second cervical vertebra (C2) using computed tomographic (CT) images in a Japanese population and to develop discriminant function formulae. The data were collected from 224 Japanese cadavers (112 male subjects, 112 female subjects) on which postmortem CT scanning and subsequent forensic autopsy were performed. Nine CT measurements of the C2 were performed for CT images of each subject. The measurements were assessed using descriptive statistics and discriminant function analyses (DFA). All of the measurements demonstrated significant sexual dimorphism. Multiple DFA with stepwise variable selection resulted in multivariable models; a five-variable model reached an accuracy rate of 92.9%. Our results suggest that metric analysis based on CT images of the C2 can accurately determine the sex from the human skeletal remains in a contemporary Japanese population and may be useful for sex estimation in forensic anthropology.

Determination of sex on the basis of hyoid bone measurements in a Japanese population using multidetector computed tomography

Sex determination for unidentified human remains is important because the determined sex is usually used as a foundation for the estimation of other biological profiles. This study investigated the sexual dimorphism of the adult hyoid bone and developed discriminant equations to accurately estimate sex in a contemporary Japanese population using measurements on two-dimensional computed tomography (CT) images. The study sample comprised 280 cadavers (140 males, 140 females) of known age and sex that underwent postmortem CT and subsequent forensic autopsy. In accordance with previous studies, seven measurements were performed using two-dimensional CT reconstructed images. Most measurements of males were significantly greater than those of females. The perpendicular length from the most anterior edge of the hyoid body to the line that connects the most distal points of the greater horns of the hyoid and the linear distance between the most lateral edges of the hyoid body most significantly contributed to sex determination. This study demonstrated that discriminant functions on the basis of three measurements provided higher rates of accurate sex classification (93.3–94.6%) than univariate functions. Therefore, the hyoid bone is highly sexually dimorphic in the contemporary Japanese population and may be useful in forensic contexts for sex determination with a high level of accuracy.

Stature estimation in a contemporary Japanese population based on clavicular measurements using multidetector computed tomography

The aims of this study was to assess the correlation between stature and clavicular measurements in a contemporary Japanese population using three-dimensional (3D) computed tomographic (CT) images, and to establish regression equations for predicting stature. A total of 249 cadavers (131 males, 118 females) underwent postmortem CT scanning and subsequent forensic autopsy between October 2011 and May 2016 in our department. Four clavicular variables (linear distances between the superior margins of the left and right sternal facets to the anterior points of the left and right acromial ends and between the superior margins of the left and right sternal facets to the left and right conoid tubercles) were measured using 3D CT reconstructed images that extracted only bone data. The correlations between stature and each of the clavicular measurements were assessed with Pearson product-moment correlation coefficients. These clavicular measurements correlated significantly with stature in both sexes. The lowest standard error of estimation value in all, male, and female subjects was 3.62cm (r2=0.836), 3.55cm (r2=0.566), and 3.43cm (r2=0.663), respectively. In conclusion, clavicular measurements obtained from 3D CT images may be useful for stature estimation of Japanese individuals, particularly in cases where better predictors, such as long bones, are not available.

Differences in biomechanical properties and thickness among frontal and parietal bones in a Japanese sample

The aim of this study was to assess the mechanical properties and thickness of adult frontal and parietal bones. The heads of 114 Japanese cadavers (78 male cadavers and 36 female cadavers) of known age and sex were used. A total of 912 cranial samples, 8 from each skull, were collected. Samples were imaged using multidetector computed tomography to measure sample thickness. The fracture load of each sample was measured using a bending test with calculation of flexural strength. Statistical analyses demonstrated no significant bilateral difference in either the mechanical properties or thickness of frontal or parietal bones. The mechanical properties and thicknesses of frontal bones were significantly greater than those of parietal bones regardless of sex. Therefore, the skull may have a great ability to resist frontal impacts compared with parietal impacts. In female samples, parietal bones were found to have a more uniform structure when compared with male samples. Male parietal bones were found to be thicker at medial sites than at lateral sites. This study also revealed parietal bones at lateral sites in female samples were thicker than in male samples. No strong association was observed between age and flexural strength of frontal or parietal bones. However, the fracture load was negatively correlated with age most likely due to the reduction of thickness.

Incidence of three-rooted mandibular first molars among contemporary Japanese individuals determined using multidetector computed tomography

PURPOSE The purpose of this study was to determine the incidence of three-rooted mandibular first molars in a contemporary Japanese population using multidetector computed tomography (MDCT) and examine whether this characteristic root form may be useful for identification purposes. METHODS Prior to their forensic autopsies, we obtained MDCT scans of 365 cadavers (255 males, 110 females) with mandibular first molars on both sides. Altogether, 730 mandibular first molars were examined morphologically on reconstructed CT images, and the incidence of three-rooted molars was recorded. The results were analyzed statistically to determine sex and left-right differences using the chi-square test. RESULTS In all, 189 (25.9%) of the 730 mandibular first molars had three roots: 79 (31.0%) in the 255 males and 35 (31.8%) in the 110 females. No statistically significant difference was found between the sexes. In the 39 individuals who had unilateral three-rooted mandibular first molars, 7 (17.9%) were on the left side and 32 (82.1%) were on the right side, indicating a statistically significant predominance on the right side. CONCLUSIONS The incidence of three-rooted mandibular first molars in contemporary Japanese individuals was 25.9%, with no statistically significant sex difference, but in the case of unilateral three-rooted teeth, with a statistically significant predominance on the right side. Our study found that Japanese and northeastern Asians have a high incidence of the three-rooted mandibular first molars among individuals of Mongolian origin; this finding may be a useful screening tool for identification of unknown individuals.

An unusual autopsy case of lethal hypothermia exacerbated by body lice-induced severe anemia.

Pediculus humanus humanus (known as body lice) are commonly found in the folds of clothes, and can cause skin disorders when they feed on human blood, resulting in an itching sensation. Body lice are known as vectors of infectious diseases, including typhus, recurrent fever, and trench fever. An infestation with blood-sucking body lice induces severe cutaneous pruritus, and this skin disorder is known as “vagabond’s disease.” A body lice infestation is sometimes complicated with iron deficiency anemia. In the present case, a man in his late 70s died of lethal hypothermia in the outdoors during the winter season. The case history and autopsy findings revealed that the cause of the lethal hypothermia was iron deficiency anemia, which was associated with a prolonged infestation of blood-sucking body lice. Also, he had vagabond’s disease because the skin on his body was abnormal and highly pigmented. This is an unusual autopsy case since the body lice contributed to the cause of the death.