Goran Markic

Accuracy of linear intraoral measurements using cone beam CT and multidetector CT: a tale of two CTs

OBJECTIVES The aim was to compare the accuracy of linear bone measurements of cone beam CT (CBCT) with multidetector CT (MDCT) and validate intraoral soft-tissue measurements in CBCT. METHODS Comparable views of CBCT and MDCT were obtained from eight intact cadaveric heads. The anatomical positions of the gingival margin and the buccal alveolar bone ridge were determined. Image measurements (CBCT/MDCT) were performed upon multiplanar reformatted data sets and compared with the anatomical measurements; the number of non-assessable sites (NASs) was evaluated. RESULTS Radiological measurements were accurate with a mean difference from anatomical measurements of 0.14 mm (CBCT) and 0.23 mm (MDCT). These differences were statistically not significant, but the limits of agreement for bone measurements were broader in MDCT (-1.35 mm; 1.82 mm) than in CBCT (-0.93 mm; 1.21 mm). The limits of agreement for soft-tissue measurements in CBCT were smaller (-0.77 mm; 1.07 mm), indicating a slightly higher accuracy. More NASs occurred in MDCT (14.5%) than in CBCT (8.3%). CONCLUSIONS CBCT is slightly more reliable for linear measurements than MDCT and less affected by metal artefacts. CBCT accuracy of linear intraoral soft-tissue measurements is similar to the accuracy of bone measurements.

Assessing the length of the mandibular ramus and the condylar process: a comparison of OPG, CBCT, CT, MRI, and lateral cephalometric measurements

BACKGROUND/OBJECTIVES To compare different imaging procedures [cone beam computed tomography (CBCT), computed tomography (CT), magnetic resonance imaging (MRI), orthopantomography (OPG), and lateral cephalometry (LC)] for assessing the mandibular height [ramus height (RH)] and condylar process (CondProc) length as they reflect mandibular growth. MATERIALS/METHODS The RH and CondProc of eight cadaver heads (each side separately) were measured using CBCT, CT, MRI, OPG, and LC. They were measured twice by two independent observers parallel to the posterior border of the mandibular ramus. An intraclass correlation coefficient (ICC) was used to assess the inter- and intraobserver reliability. The coefficient of variation was used to elucidate precision. Bland-Altman (BA) plots were used to assess the agreement between the procedures and the intra- and interobserver measurements. RESULTS All procedures, with the exception of LC, showed good intra- and interobserver agreement (maximum range of agreement: 5.3mm) and excellent reliability (ICC > 0.9). The BA plot analysis for the CondProc and RH showed similar ranges of agreement between MRI, CT, and CBCT (maximum 6.4mm) but higher ranges for OPG and LC. The MRI and OPG values were generally smaller. CONCLUSIONS/IMPLICATIONS All 3D imaging procedures yielded nearly equal results when used to measure the CondProc and RH. MRI is recommended because it avoids ionizing radiation and has higher sensitivity in the detection of inflammation. A 2-year threshold for detecting growth in the follow-up period should be taken into account for all 3D imaging methods. Measuring the RH is recommended for the follow-up of condylar growth because reference values for annual increments are published.

Cervical vertebrae anomalies in subjects with Class II malocclusion assessed by lateral cephalogram and cone beam computed tomography

A high prevalence of cervical vertebrae anomalies (CVA) has been recently associated with various malocclusions. Our aim was to study the prevalence of CVA on lateral cephalograms in Class II subjects and to compare the findings with those obtained from cone beam computed tomography (CBCT). Standardized cephalograms of 238 Class II patients were analysed for CVA. Cephalogram and CBCT were available for an additional 21 subjects. Cephalometric values were correlated with vertebrae morphology; logistic regressions and intraobserver agreement were evaluated. Inspection of lateral cephalograms could exclude CVA in 90.3 per cent of the subjects, while 9.7 per cent showed potential fusions. No correlations were found between the cephalometric values and potential vertebrae anomalies. In the 21 patients with a CBCT and a lateral cephalogram, the visual assessment of the cephalogram yielded a potential fusion in nine cases. None could be confirmed by CBCT. A low number of potentially fused cervical vertebrae could be detected on lateral cephalograms. The possible fusions did not correlate to any cephalometric values nor could they be confirmed by CBCT, the gold standard for assessing CVA. Visual examination of a cephalogram may result in a false-positive finding and does not allow reliable diagnosis of CVA.

Dentofacial and upper airway characteristics of mild and severe class II division 1 subjects

The aim of this retrospective, cross-sectional study was to assess whether mild and severe Class II division 1 subjects have craniofacial and upper airway characteristics, which relate to the severity of Class II as judged by overjet or ANB angle. The sample consisted of pre-treatment lateral cephalograms and dental casts of 131 males and 115 females (mean age 10.4 ± 1.6). Inclusion criteria were: healthy Caucasian subjects, at least ¾ Class II first molar relationship on both sides and overjet ≥ 4 mm. The cephalograms were traced and digitized. Distances and angular values were computed. Mild and severe Class II was defined by overjet (<10 mm/≥ 10 mm) or by ANB angle (<7 degrees/≥7 degrees). Statistics were performed with two-sample t-test and Pearsons correlation analysis. In the two overjet groups, significant differences were mainly found for incisor inclination while the two ANB groups differed significantly in SNA, WITS, Go-Pg, SpaSpp/MGo, SN/MGo, and Ar-Gn. The shortest airway distance between the soft palate and the posterior pharyngeal wall was significantly correlated to the NS/Ar angle. Statistical analysis revealed several significant correlations. Patients with a large overjet or ANB angle differed significantly from patients with a small overjet or ANB angle mainly in their incisor inclination. In the present sample, the overjet and to some extent also the ANB angle is determined by soft tissue or individual tooth position rather than by skeletal background. In retrognathic patients, a tendency towards smaller airway dimensions was found. However, statistical analysis did not reveal a strong connection between upper airway and dentoskeletal parameters, but a large interindividual variation.

Temporary anchorage device usage: a survey among Swiss orthodontists

BackgroundThe aim of the survey was to obtain information on the treatment plan preferences, mechanics and characteristics of temporary anchorage device (TAD) application using a single case presented to orthodontists in Switzerland.MethodsA structured questionnaire to be completed by all study participants with case-specific (treatment plan including mechanics and TAD usage) and general questions (general fixed appliance and TAD usage as well as professional, educational and demographic questions) together with an orthodontic borderline case was utilised. The case was a female adult with dental Class II/2, deep bite and maxillary anterior crowing, who had been treated in childhood with extraction of four premolars and fixed appliance followed by wisdom tooth extraction.ResultsThe response rate was 24.4% (108 out of 443). The majority (96.3%, 104) proposed comprehensive treatment, while 3.7% (4) planned only alignment of maxillary teeth. 8.3% (9) included a surgical approach in their treatment plan. An additional 0.9% (1) combined the surgical approach with Class II mechanics. 75.1% (81) decided on distalization on the maxilla using TADs, 7.4% (8) planned various types of Class II appliances and 3.7% (4) combined distalization using TADs or headgear with Class II appliances and surgery. Palatal implants were the most popular choice (70.6%, 60), followed by mini-screws (22.4%, 19) and mini-plates on the infrazygomatic crests (7.0%, 6). The preferred site of TAD insertion showed more variation in sagittal than in transversal dimension, and the median size of mini-screws used was 10.0-mm long (interquartile range (IQR) 2.3 mm) and 2.0-mm wide (IQR 0.3 mm).ConclusionsDistalization against palatal implants and then distalization against mini-screws were the most popular treatment plans. Preferred site for TAD insertion varied depending on type and size but varied more widely in the sagittal than in the transversal dimension.

The inclination of mandibular incisors revisited.

OBJECTIVE To reassess the inclination of lower incisors and evaluate possible associations with gender, age, symphyseal parameters, and skeletal pattern. MATERIALS AND METHODS Twelve hundred and seventy-two (605 females, 667 males) cephalograms of untreated subjects of a craniofacial growth study (age: 8-16 years) were evaluated. Correlations between the angulation of the lower incisors and age, symphyseal distances (height, width, and depth), symphyseal ratios (height-width, height-depth), and skeletal angles (divergence of the jaws and gonial angle) were investigated for all ages separately and for both sexes independently. RESULTS The inclination of lower incisors increased over age (8 years: girls = 93.9° [95% CI, 92.3°-95.7°], boys = 93.3° [95% CI, 91.8°-94.9°]; 16 years: girls = 96.1° [95% CI, 94.1°-98.2°], boys = 97.1° [95% CI, 95.6°-98.6°]). Inclination of lower incisors correlated with the divergence of the jaws for all ages significantly or highly significantly, except for boys and girls 9 years of age and girls 11 and 12 years of age, for which only a tendency was observed. Similarly, a strong correlation to gonial angle could be observed. No correlation could be found between the inclination of lower incisors and any symphyseal parameters (absolute measurements and ratios), except for symphyseal depth. CONCLUSION Lower incisor inclination is linked to the subjects sex, age, and skeletal pattern. It is not associated with symphyseal dimensions, except symphyseal depth. Factors related to natural inclination of lower incisors should be respected when establishing a treatment plan.

Method of visualisation influences accuracy of measurements in cone- beam computed tomography

This study evaluated the potential impact of different visualisation methods of cone-beam computed tomography (CBCT) on the accuracy of linear measurements of calcified structures, and assessed their interchangeability. High resolution (0.125 mm voxel) CBCT scans were obtained from eight cadaveric heads. The distance between the alveolar bone ridge and the incisal edge was determined for all mandibular incisors and canines, both anatomically and with measurements based on the following five CBCT visualisation methods: isosurface, direct volume rendering, multiplanar reformatting (MPR), maximum intensity projection of the volume of interest (VOIMIP), and average intensity projection of the volume of interest (VOIAvIP). All radiological methods were tested for repeatability and compared with anatomical results for accuracy, and limits of agreement were established. Interchangeability was evaluated by reviewing disparities between the methods and disclosing deterministic differences. Fine intra- and inter-observer repeatability was asserted for all visualisation methods (intraclass correlation coefficient ≤0.81). Measurements were most accurate when performed on MPR images and performed most disappointingly on isosurface-based images. Direct volume rendering, VOIMIP and VOIAvIP achieved acceptable results. It can be concluded that visualisation methods influence the accuracy of CBCT measurements. The isosurface viewing method is not recommended, and multiplanar reformatted images should be favoured for linear measurements of calcified structures.

Evidence of secular trend in mandibular pubertal growth

Background During puberty, mandibular growth follows a growth curve comparable to somatic growth. This study aimed to review the relationship between mandibular pubertal peak height velocity (PHV) and skeletal age, and to investigate the possibility of a secular trend. Methods Retrospective analysis was performed of two historical craniofacial growth studies (Denver Growth Study; observational time: 1943-1965, and Zurich Growth Study; observational time: 1982-1984) of healthy untreated subjects. Two mandibular growth measures (Articulare-Pogonion [Ar-Pg], Condylion-Pogonion [Co-Pg]) were retrieved from cephalograms (n: 990) and corresponding skeletal age based on hand-wrist radiographs. Mandibular growth velocity was related to skeletal age, PHV was established by use of cubic smoothing splines and variability was calculated by bootstrap resampling for every growth study and gender separately. Results Sexual dimorphism in mandibular growth was apparent in both cohorts. In subjects of the Denver Growth Study, mandibular PHV occurred at a more advanced skeletal age than in subjects of the Zurich Growth Study. This trend was more pronounced in males, for whom PHV of Co-Pg shifted from 14.4 to 13.8 years and of Ar-Pg from 14.6 to 13.7 years. This tendency was more subtle in females: PHV of Co-Pg shifted from 12.7 to 12.4 years and of Ar-Pg from 12.6 to 11.8 years. Conclusions Mandibular growth appears to be subject to a secular trend. When related to skeletal age, this secular trend seems to be more accentuated than the established secular trend for somatic pubertal growth.