Gozde Ozaydin Ince

One-Dimensional Surface-Imprinted Polymeric Nanotubes for Specific Biorecognition by Initiated Chemical Vapor Deposition (iCVD)

Molecular imprinting is a powerful, generic, and cost-effective technique; however, challenges still remain related to the fabrication and development of these systems involving nonhomogeneous binding sites, insufficient template removing, incompatibility with aqueous media, low rebinding capacity, and slow mass transfer. The vapor-phase deposition of polymers is a unique technique because of the conformal nature of coating and offers new possibilities in a number of applications including sensors, microfluidics, coating, and bioaffinity platforms. Herein, we demonstrated a simple but versatile concept to generate one-dimensional surface-imprinted polymeric nanotubes within anodic aluminum oxide (AAO) membranes based on initiated chemical vapor deposition (iCVD) technique for biorecognition of immunoglobulin G (IgG). It is reported that the fabricated surface-imprinted nanotubes showed high binding capacity and significant specific recognition ability toward target molecules compared with the nonimprinted forms. Given its simplicity and universality, the iCVD method can offer new possibilities in the field of molecular imprinting.

Flow Boiling Enhancement in Microtubes With Crosslinked pHEMA Coatings and the Effect of Coating Thickness

In this experimental study, flow boiling in mini/microtubes was investigated with surface enhancements provided by crosslinked polyhydroxyethylmethacrylate (pHEMA) coatings, which were used as a crosslinker coating type with different thicknesses (∼50 nm, 100 nm, and 150 nm) on inner microtube walls. Flow boiling heat transfer experiments were conducted on microtubes (with inner diameters of 249 μm, 507 μm, and 908 μm) coated with crosslinked pHEMA coatings. pHEMA nanofilms were deposited with initiated chemical vapor deposition (iCVD) technique. De-ionized water was utilized as the working fluid in this study. Experimental results obtained from coated microtubes were compared to their plain surface counterparts at two different mass fluxes (5000 kg/m2 s and 20,000 kg/m2 s), and significant enhancements in critical heat flux (up to 29.7%) and boiling heat transfer (up to 126.2%) were attained. The enhancement of boiling heat transfer was attributed to the increase in nucleation site density and incidence of bubbles departing from surface due to porous structure of crosslinked pHEMA coatings. The underlying mechanism was explained with suction-evaporation mode. Moreover, thicker pHEMA coatings resulted in larger enhancements in both CHF and boiling heat transfer.

Cell sheet based bioink for 3D bioprinting applications

In this research, a novel development of bioink from cell sheets is presented for scaffold free bioprinting applications. Poly(N-isopropylacrylamide) (PNIPAAm) coated surfaces were first prepared by using initiated chemical vapor deposition method. Cell-sheets were then grown on these thermoresponsive pNIPAAm coated surfaces and easily detached without disturbing delicate cell-extracellular matrix (ECM) and cell-cell interactions. The detached cells sheets were used to prepare cell sheet based bioink and bioprinted to form various shapes. The results showed that the prepared cell-sheet based bioink shows an increase in the structural integrity compare to cell-aggregates suggesting that the cell sheet aggregates preserved interconnected ECM proteins. The viability of cell sheet based aggregates was also compared to single cell aggregates at three different time points in a seven-day period after printing. The developed cell-sheet based bioink has several advantages in terms of shape fidelity, reproducibility and automated deposition for bioprinting applications. The results also demonstrated that the bioprinted constructs secreted collagen type I which is a strong indication of starting ECM deposition. Moreover, the immunostaining results showed that the fibronectin in cell sheets was preserved during and after the preparation process of bioink.

Initiated Chemical Vapor Deposition and Light-Responsive Cross-Linking of Poly(vinyl cinnamate) Thin Films

The first vapor-phase deposition of poly(vinyl cinnamate) (PVCin) is reported. Initiated chemical vapor deposition (iCVD) is used to synthesize PVCin thin films with an average thickness of 100 nm. Free radical polymerization and cyclization reactions compete during the deposition process, with approximately 45% of the repeat units undergoing cyclization. Exposure to UV light (λ = 254 nm) induces dimerization (cross-linking) of the PVCin, which is quantified using spectroscopic techniques. Approximately 90% of the free cinnamate moieties are dimerized at a UV dose of 300 mJ cm(-2) . PVCin is also incorporated into a copolymer with N-isopropylacrylamide, which exhibits a characteristic change in hydrophilicity with temperature. The copolymer is selectively cross-linked through a mask, and reversible swelling of patterns with 30 μm resolution is demonstrated by submerging the film in water.

Pool boiling heat transfer characteristics of inclined pHEMA-coated surfaces

New requirements for heat exchangers offered pool boiling heat transfer on structured and coated surfaces as one of the promising methods for effective heat removal. In this study, pool boiling experiments were conducted on polyhydroxyethylmethacrylate (pHEMA)-coated surfaces to investigate the effect of surface orientation on bubble dynamics and nucleate boiling heat transfer. pHEMA coatings with thicknesses of 50, 100, and 200 nm were deposited using the initiated chemical deposition (iCVD) method. De-ionized water was used as the working fluid. Experiments were performed on horizontal and inclined surfaces (inclination angles of 10 deg, 30 deg, 50 deg, and 70 deg) under the constant heat flux (ranging from 10 to 80 kW/m2) boundary condition. Obtained results were compared to their plain surface counterparts, and heat transfer enhancements were observed. Accordingly, it was observed that the bubble departure phenomenon was affected by heat flux and wall superheat on bare silicon surfaces, while the supply path of vapor altered the bubble departure process on pHEMA-coated surfaces. Furthermore, the surface orientation played a major role on bubble dynamics and could be considered as a mechanism for fast vapor removal from surfaces. Bubble coalescence and liquid replenishment on coated surfaces had a promising effect on heat transfer coefficient enhancement on coated surfaces. For horizontal surfaces, a maximum enhancement of 25% relative to the bare surface was achieved, while the maximum enhancement was 105% for the inclined coated surface under the optimum condition. iCVD was proven to be a practical method for coating surfaces for boiling heat transfer applications due to the obtained promising results.

A facile method for fabrication of responsive micropatterned surfaces

Responsive micropatterned surfaces are fabricated using a facile, one-step method that allows for the separate control of topography and surface chemistry. Temperature responsive poly(N-isopropylacrylamide) (pNIPAAm), and amphiphilic poly(hydroxyethyl methacrylate-co-perfluorodecylacrylate) (p(HEMA-co-PFA)) polymer thin films are deposited on prestrained polydimethylsiloxane (PDMS) substrates using the initiated chemical vapor deposition (iCVD) technique. Subsequent release of the strain results in the formation of periodic wrinkle structures on the surface of polymer thin films. The iCVD technique allows control of the chemical composition while preserving the functional groups of the polymers intact. Surface topography is controlled separately by tuning elastic modulus of the polymer coatings and substrates. Highly ordered, well-defined wrinkle structures are obtained on pNIPAAm surfaces whereas wrinkles on the amphiphilic surfaces are less ordered due to the difference in elastic moduli of the polymers. Furthermore, process temperature is observed to have detrimental effects on the ordering of the wrinkles.

Synthesis of coaxial nanotubes of polyaniline and poly(hydroxyethyl methacrylate) by oxidative/initiated chemical vapor deposition

Vapor-phase synthesis techniques of polymeric nanostructures offer unique advantages over conventional, solution-based techniques because of their solventless nature. In this work, we report the fabrication of coaxial polymer nanotubes using two different chemical vapor deposition methods. The fabrication process involves the deposition of an outer layer of the conductive polyaniline (PANI) by oxidative chemical vapor deposition, followed by the deposition of the inner layer of poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogel by initiated chemical vapor deposition. The vapor-phase techniques allowed for fine-tuning of the thickness of the individual layers, keeping the functionalities of the polymers intact. The response of the single components and the coaxial nanotubes to changes in humidity was investigated for potential humidity sensor applications. For single-component conductive PANI nanotubes, the resistance changed parabolically with relative humidity because of competing effects of doping and swelling of the PANI polymer under humid conditions. Introducing a hydrogel inner layer increased the overall resistance, and enhanced swelling, which caused the resistance to continuously increase with relative humidity.

An Experimental Study on Flow Boiling Characteristics of pHEMA Nano-Coated Surfaces in a Microchannel

In this study, the effect of pHEMA (Polyhydroxyethylmethacrylate) nanostructure coated surfaces on flow boiling was investigated in a rectangular microchannel. Experiments were conducted using deionized water as the working fluid to investigate flow boiling in a microchannel with dimensions of 14 cm length, 1.5 cm width, and 500 μm depth. The effect of pHEMA coatings (coated on 1.5 × 1.5 cm2 silicon plates) on heat transfer coefficients and flow patterns was assessed and supported using a high speed camera system. Although the contact angle decreases on nano-coated surfaces, due to surface porosity, boiling heat transfer coefficient increases. Furthermore, visualization results indicated that uncoated surfaces experienced a smaller nucleate boiling region. It was also observed that dryout occurs at higher heat fluxes for coated surfaces.Copyright

Enhancemet of flow boiling heat transfer in pHEMA/pPFDA coated microtubes with longitudinal variations in wettability

Flow boiling heat transfer was investigated in stainless steel hypodermic microtubes, whose surfaces were enhanced by gradient crosslinked polyhydroxyethylmethacrylate (pHEMA)/polyperfluorodecylacrylate (pPFDA) coatings thereby offering variations in wettability along the surface as well as high porosity. The initiated chemical vapor deposition (iCVD) method was implemented for coating the inner walls of the microtubes with an inner diameter of 502 μm, and deionized water was used as the working fluid. Experimental results were obtained from the coated microtubes, where one end corresponded to the pHEMA (hydrophilic) coated part and the other end was the most hydrophobic location with the pPFDA (hydrophobic) coating so that wettability varied along the length of the microtube. The results of both the hydrophobic and hydrophilic inlet cases were compared to their plain surface counterparts at the mass flux of 9500 kg/m2s. The experimental results showed a remarkable increase in boiling heat transfer with t...

Flow Boiling Enhancement in Microtubes With Crosslinked pHEMA Coatings

In this experimental study, flow boiling in mini/microtubes was investigated with surface enhancements provided by crosslinked polyhydroxyethylmethacrylate (pHEMA) coatings, which were used as a crosslinker coating type with different thicknesses (50 nm, 100 nm and 150 nm) on inner microtube walls. Flow boiling heat transfer experiments were conducted on microtubes (with inner diameters of 249 µm, 507 µm and 998 µm) coated with crosslinked pHEMA coatings. pHEMA nanofilms were deposited with initiated chemical vapor deposition (iCVD) technique. De-ionized water was utilized as the working fluid in this study. Experimental results obtained from coated microtubes were compared to their plain surface counterparts at two different mass fluxes (5,000 kg/m2s and 20,000 kg/m2s), and significant enhancements in Critical Heat Flux (up to 29.7 %) and boiling heat transfer (up to 126.2 %) were attained. Thicker pHEMA coatings resulted in larger enhancements in both CHF and boiling heat transfer.