Greg J. Sommer

On-chip isoelectric focusing using photopolymerized immobilized pH gradients.

We present the first successful adaptation of immobilized pH gradients (IPGs) to the microscale (muIPGs) using a new method for generating precisely defined polymer gradients on-chip. Gradients of monomer were established via diffusion along 6 mm flow-restricted channel segments. Precise control over boundary conditions and the resulting gradient is achieved by continuous flow of stock solutions through side channels flanking the gradient segment. Once the desired gradient is established, it is immobilized via photopolymerization. Precise gradient formation was verified with spatial and temporal detection of a fluorescent dye added to one of the flanking streams. Rapid (<20 min) isoelectric focusing of several fluorescent pI markers and proteins is demonstrated across pH 3.8-7.0 muIPGs using both denaturing and nondenaturing conditions, without the addition of carrier ampholytes. The muIPG format yields improved stability and comparable resolution to prominent on-chip IEF techniques. In addition to rapid, high-resolution separations, the reported muIPG format is amenable to multiplexed and multidimensional analysis via custom gradients as well as integration with other on-chip separation methods.

Centrifugal Microfluidic Platform for Ultrasensitive Detection of Botulinum Toxin

We present an innovative centrifugal microfluidic immunoassay platform (SpinDx) to address the urgent biodefense and public health need for ultrasensitive point-of-care/incident detection of botulinum toxin. The simple, sample-to-answer centrifugal microfluidic immunoassay approach is based on binding of toxins to antibody-laden capture particles followed by sedimentation of the particles through a density-media in a microfluidic disk and quantification by laser-induced fluorescence. A blind, head-to-head comparison study of SpinDx versus the gold-standard mouse bioassay demonstrates 100-fold improvement in sensitivity (limit of detection = 0.09 pg/mL), while achieving total sample-to-answer time of <30 min with 2-μL required volume of the unprocessed sample. We further demonstrate quantification of botulinum toxin in both exogeneous (human blood and serum spiked with toxins) and endogeneous (serum from mice intoxicated via oral, intranasal, and intravenous routes) samples. SpinDx can analyze, without any sample preparation, multiple sample types including whole blood, serum, and food. It is readily expandable to additional analytes as the assay reagents (i.e., the capture beads and detection antibodies) are disconnected from the disk architecture and the reader, facilitating rapid development of new assays. SpinDx can also serve as a general-purpose immunoassay platform applicable to diagnosis of other conditions and diseases.

Aptamers as Affinity Reagents in an Integrated Electrophoretic Lab-on-a-Chip Platform

Nucleic acid based affinity reagents (e.g., aptamers) offer several possible advantages over antibodies as specific recognition elements in biochemical assays. Besides offering improved cost and stability, aptamers are ideal for rapid electrophoretic analysis due to their low molecular weight and high negative charge. While aptamers have proven well-suited for affinity-shift electrophoretic analysis, demonstrating a fully integrated aptamer-based assay platform represents an important achievement toward low-cost point-of-care analysis, particularly for remote or resource poor settings where cost and ambient stability of reagents is a key consideration. Here we perform and evaluate the suitability of aptamer-based affinity assays for two clinically relevant target analytes (IgE using a known aptamer and NF-κB using a thio-modified aptamer) in an integrated electrophoretic gel-shift platform. Key steps of (i) mixing sample with aptamer, (ii) buffer exchange, and (iii) preconcentration of sample were successfully integrated on-chip upstream of a fluorescence-based gel-shift analysis step. This approach, utilizing a size-exclusion membrane optimized here for aptamer retention and preconcentration with sample, enables automated sample-to-answer for trace analytes in 10 min or less. We addressed notable nonspecific interference from serum proteins by adding similar nucleic acid competitors to suppress such interactions with the aptamer. Nanomolar sensitivities were demonstrated and integrated preconcentration of sample provides an important means of further improving detection sensitivities. Aptamers proved superior in many respects to antibody reagents, particularly with regard to speed and resolution of gel-shifts associated with specific binding to target.

Microscale isoelectric fractionation using photopolymerized membranes.

In this work, we introduce microscale isoelectric fractionation (μIF) for isolation and enrichment of molecular species at any desired location in a microfluidic chip. Narrow pH-specific polyacrylamide membranes are photopatterned in situ for customizable device fabrication; multiple membranes of precise pH are easily incorporated throughout existing channel layouts. Samples are electrophoretically driven across the membranes such that charged species, for example, proteins and peptides, are rapidly discretized into fractions based on their isoelectric points (pI) without the use of carrier ampholytes. This format makes fractions easy to compartmentalize and access for integrated preparative or analytical operations on-chip. We present and discuss the key design considerations and trade-offs associated with proper system operation and optimal run conditions. Efficient and reproducible fractionation of model fluorescent pI markers and proteins is achieved using single membrane fractionators at pH 6.5 and 5.3 from both buffer and Escherichia coli cell lysate sample conditions. Effective fractionation is also shown using a serial 3-membrane fractionator tailored for isolating analytes-of-interest from high abundance components of serum. We further demonstrate that proteins focused in pH specific bins can be rapidly and efficiently transferred to another location in the same chip without unwanted dilution or dispersive effects. μIF provides a rapid and versatile option for integrated sample prep or multidimensional analysis, and addresses the glaring proteomic need to isolate trace analytes from high-abundance species in minute volumes of complex samples.