Guang-Xian Zhong

Electrochemical biosensor based on nanoporous gold electrode for detection of PML/RARα fusion gene

In this study, a kind of nanoporous gold electrode (NPG) prepared with repetitive square-wave oxidation reduction cycle (SWORC) was reported. The active surface area of the proposed NPG electrode was 9.9 times larger than that of a bare flat one characterized by cyclic voltammetry (CV). An electrochemical DNA biosensor based on NPG electrode was fabricated for detection of promyelocytic leukemia/retinoic acid receptor α (PML/RARα) fusion gene in acute promyelocytic leukemia (APL) by using Methylene Blue (MB) as an electroactive indicator. Differential pulse voltammetry (DPV) was employed to monitor the hybridization reaction on the probe modified electrode. The decrease of the peak current of MB was observed upon hybridization of the probe with target DNA. The results indicated that the peak current was linear with the concentration of complementary strand in the range of 60 pM to 220 pM with a detection limit of 6.7 pM. This new biosensor exhibited excellent sensitivity and selectivity and had been used for an assay of PCR real sample with a satisfactory result.

Coupling technique of random amplified polymorphic DNA and nanoelectrochemical sensor for mapping pancreatic cancer genetic fingerprint.

Objective To review the feasibility of coupling the techniques of random amplified polymorphic DNA (RAPD) with carbon nanotube-based modified electrode for guanine/deoxyguanine triphosphate (dGTP) electrochemical sensing for mapping of the pancreatic cancer genetic fingerprint and screening of genetic alterations. Methods We developed a new method to study the electrochemical behavior of dGTP utilizing carbon multiwalled nanotube (MWNT)-modified glassy carbon electrodes (GCEs). RAPD was applied for amplification of DNA samples from healthy controls and patients with pancreatic cancer under the same conditions to determine the different surplus quantity of dGTP in the polymerase chain reaction (PCR), thereby determining the difference/quantity of PCR products or template strands. Using this method we generated a genetic fingerprint map of pancreatic cancer through the combination of electrochemical sensors and gel electrophoresis to screen for genetic alterations. Cloning and sequencing were then performed to verify these gene alterations. Results dGTP showed favorable electrochemical behavior on the MWNTs/GCE. The results indicated that the electrical signal and dGTP had a satisfactory linear relationship with the dGTP concentration within the conventional PCR concentration range. The MWNTs/GCE could distinguish between different products of RAPD. This experiment successfully identified a new pancreatic cancer-associated mutant gene fragment, consisting of a cyclin-dependent kinase 4 gene 3′ terminal mutation. Conclusion The coupling of RAPD and nanoelectrochemical sensors was successfully applied to the screening of genetic alterations in pancreatic cancer and for mapping of DNA fingerprints.

Electrochemical method for monitoring the progress of polymerase chain reactions using Methylene blue as an indicator

AbstractWe report on the proof-of-principle of an amperometric method to monitor the progress of a polymerase chain reaction (PCR) in real-time. It is based on the finding that the intercalating redox probe Methylene Blue (MB) becomes less easily electrochemically detectable once intercalated into double-stranded DNA (ds-DNA) compared to its free form. This was studied by cyclic voltammetry before and after addition of salmon sperm ds-DNA. Under optimized conditions, the products of the PCR of mitochondrial DNA fragments were quantitatively detected at different stages of amplification cycles. This strategy is potentially cheaper and easier to integrate into a hand-held miniaturized device than fluorescence-based real-time PCR. FigureWe report on the proof-of-principle of an amperometric method based on methylene blue which becomes less electrochemically detectable once intercalated into double-stranded DNA compared to its free form to monitor the progress of PCR in real-time. This strategy is potentially cheap and easy to integrate into a hand-held miniaturized device.

Detection of femtomolar level osteosarcoma-related gene via a chronocoulometric DNA biosensor based on nanostructure gold electrode.

In this paper, a sensitive chronocoulometric deoxyribonucleic acid (DNA) biosensor based on a nanostructure gold electrode was fabricated for detection of the femtomolar level survivin gene which was correlated with osteosarcoma by using hexaamine-ruthenium III complexes, [Ru(NH3)6]3+, as the electrochemical indicator. The effect of different frequencies on the real surface area of the nanostructure gold electrode obtained by repetitive square-wave oxidation reduction cycle was investigated. At the optimal frequency of 8000 Hz, the real surface of the developed nanostructure gold electrode was about 42.5 times compared with that of the bare planar gold electrode. The capture probe DNA was immobilized on the nanostructure gold electrode and hybridized with target DNA. Electrochemical signals of hexaamine-ruthenium III bound to the anionic phosphate of DNA strands via electrostatic interactions were measured by chronocoulometry before and after hybridization. The increase of the charges of hexaamine-ruthenium III was observed upon hybridization of the probe with target DNA. Results indicate that this DNA biosensor could detect the femtomole (fM) concentration of the DNA target quantitatively in the range of 50 fM to 250 fM; the detection limit of this DNA biosensor was 5.6 fM (signal to noise = 3). This new biosensor exhibits excellent sensitivity and selectivity and has been used for an assay of polymerase chain reaction (PCR) with a satisfactory result.

Sensitive electrochemical immunosensor based on three-dimensional nanostructure gold electrode.

A sensitive electrochemical immunosensor was developed for detection of alpha-fetoprotein (AFP) based on a three-dimensional nanostructure gold electrode using a facile, rapid, “green” square-wave oxidation-reduction cycle technique. The resulting three-dimensional gold nanocomposites were characterized by scanning electron microscopy and cyclic voltammetry. A “sandwich-type” detection strategy using an electrochemical immunosensor was employed. Under optimal conditions, a good linear relationship between the current response signal and the AFP concentrations was observed in the range of 10–50 ng/mL with a detection limit of 3 pg/mL. This new immunosensor showed a fast amperometric response and high sensitivity and selectivity. It was successfully used to determine AFP in a human serum sample with a relative standard deviation of <5% (n=5). The proposed immunosensor represents a significant step toward practical application in clinical diagnosis and monitoring of prognosis.

The clinical significance of the Ezrin gene and circulating tumor cells in osteosarcoma

Purpose The aim of this study was to investigate the clinical significance of circulating tumor cells (CTCs) in the peripheral blood of an osteosarcoma and the Ezrin gene expressed in CTCs. Patients and methods CTC enrichment was done with CanPatrol™ CTC enrichment technique in 41 patients with osteosarcoma. The characterization of CTCs was performed using a multiple messenger RNA in situ analysis (MRIA). The expression of the Ezrin gene in CTCs was detected by RNA probe technology. The correlations of CTC counts, cell type and the expression level of the Ezrin gene with clinical stage and metastasis of osteosarcoma were analyzed using SPSS 16.0 software. Results The CTC counts correlated significantly with Enneking stage (P<0.001). The ratio of mesenchymal CTCs correlated with the distant metastases (P<0.001). Ezrin gene expression in CTCs correlated significantly with distant metastases (χ2=152.51, P=0.000). Conclusion The ratio of mesenchymal CTCs in the peripheral blood of osteosarcoma correlates with distant metastases. High expression of Ezrin gene in CTCs correlates with distant metastases.