Guido Sala

Combinatory Effects of Texture and Aroma Modification on Taste Perception of Model Gels

In this study, the effects of texture modification and aroma-induced sweetness enhancement were systematically investigated in apple-flavored semi-solid Na-caseinate gels. Gels containing apple juice as a basic flavor were developed differing in stiffness, brittleness and serum release (texture modification), aroma, and sugar concentration (flavor modification). In a full factorial design (2 × 2 × 2), eight samples were evaluated by a sensory panel on ten attributes (five texture, five flavor). Sweetness was enhanced significantly by modification of texture, aroma, and sugar concentration. Texture modification was found to be by far the greatest contributor to overall sweetness. In comparison to texture modifications, aroma modification and changes of sugar concentration resulted only in small sweetness enhancement. When texture and aroma modifications are combined, a small additive effect of aroma modification on sweetness enhancement was found in addition to the sweetness enhancement caused by texture modification. This suggests that the relationship between texture (modification) and flavor (modification) and sweetness is additive in a nonlinear manner. It can be concluded that texture modification is a valid tool to enhance taste intensity. Hence, texture modification can compensate for a loss of sweet taste intensity induced by sugar reduction, while aroma-induced sweetness enhancement can contribute to further taste enhancement in order to develop healthier products.

High-Pressure–High-Temperature Processing Reduces Maillard Reaction and Viscosity in Whey Protein–Sugar Solutions

The aim of the study was to determine the influence of pressure in high-pressure-high-temperature (HPHT) processing on Maillard reactions and protein aggregation of whey protein-sugar solutions. Solutions of whey protein isolate containing either glucose or trehalose at pH 6, 7, and 9 were treated by HPHT processing or conventional high-temperature (HT) treatments. Browning was reduced, and early and advanced Maillard reactions were retarded under HPHT processing at all pH values compared to HT treatment. HPHT induced a larger pH drop than HT treatments, especially at pH 9, which was not associated with Maillard reactions. After HPHT processing at pH 7, protein aggregation and viscosity of whey protein isolate-glucose/trehalose solutions remained unchanged. It was concluded that HPHT processing can potentially improve the quality of protein-sugar-containing foods, for which browning and high viscosities are undesired, such as high-protein beverages.

Effect of Temperature and Pressure on the Stability of Protein Microbubbles

Protein microbubbles are air bubbles with a network of interacting proteins at the air-water interface. Protein microbubbles are commonly used in medical diagnostic and therapeutic research. They have also recently gained interest in the research area of food as they can be used as structural elements to control texture, allowing for the manufacture of healthier foods with increased consumer perception. For the application of microbubbles in the food industry, it is important to gain insights into their stability under food processing conditions. In this study, we tested the stability of protein microbubbles against heating and pressurization. Microbubbles could be heated to 50 °C for 2 min or pressurized to 100 kPa overpressure for 15 s without significantly affecting their stability. At higher pressures and temperatures, the microbubbles became unstable and buckled. Buckling was observed above a critical pressure and was influenced by the shell modulus. The addition of cross-linkers like glutaraldehyde and tannic acid resulted in microbubbles that were stable against all tested temperatures and overpressures, more specifically, up to 120 °C and 470 kPa, respectively. We found a relation between the storage temperatures of microbubble dispersions (4, 10, 15, and 21 °C) and a decrease in the number of microbubbles with the highest decrease at the highest storage temperature. The average rupture time of microbubbles stored at different storage temperatures followed an Arrhenius relation with an activation energy for rupture of the shell of approximately 27 kT. This strength ensures applicability of microbubbles in food processes only at moderate temperatures and storage for a moderate period of time. After the proteins in the shell are cross-linked, the microbubbles can withstand pressures and temperatures that are representative of food processes.

Interfacial properties, thin film stability and foam stability of casein micelle dispersions

Foam stability of casein micelle dispersions (CMDs) strongly depends on aggregate size. To elucidate the underlying mechanism, the role of interfacial and thin film properties was investigated. CMDs were prepared at 4°C and 20°C, designated as CMD4°C and CMD20°C. At equal protein concentrations, foam stability of CMD4°C (with casein micelle aggregates) was markedly higher than CMD20°C (without aggregates). Although the elastic modulus of CMD4°C was twice as that of CMD20°C at 0.005Hz, the protein adsorbed amount was slightly higher for CMD20°C than for CMD4°C, which indicated a slight difference in interfacial composition of the air/water interface. Non-linear surface dilatational rheology showed minor differences between mechanical properties of air/water interfaces stabilized by two CMDs. These differences in interfacial properties could not explain the large difference in foam stability between two CMDs. Thin film analysis showed that films made with CMD20°C drained to a more homogeneous film compared to films stabilized by CMD4°C. Large casein micelle aggregates trapped in the thin film of CMD4°C made the film more heterogeneous. The rupture time of thin films was significantly longer for CMD4°C (>1h) than for CMD20°C (<600s) at equal protein concentration. After homogenization, which broke down the aggregates, the thin films of CMD4°C became much more homogeneous, and both the rupture time of thin films and foam stability decreased significantly. In conclusion, the increased stability of foam prepared with CMD4°C appears to be the result of entrapment of casein micelle aggregates in the liquid films of the foam.

Foam and thin films of hydrophilic silica particles modified by β-casein

HYPOTHESIS Foaming properties of particle dispersions can be modified by addition of amphiphiles. The molar ratio between particles and amphiphiles will influence the wetting properties of the particles as well as the bulk concentration of the amphiphiles. This will have an effect on air/water interfacial composition as well as on the thin film and foam stability of the mixed system. EXPERIMENTS In this research foams and thin films of hydrophilic silica particles in presence of β-casein (β-CN) were investigated with different particle sizes and varying β-CN/silica weight ratios (between 1:10 and 1:100). Samples were characterized for particles size, morphology as well as contact angle and related to their foaming, interfacial, and thin film properties. FINDINGS A threshold weight ratio of β-CN/silica was found to be 1:50 for foam stabilization with mixtures containing silica particles no larger than 1 μm and 1:30 for film stabilization with mixtures containing larger particles. At the interface, the modified silica particles were rather diluted without much interaction for surface compressions up to 30%. Large silica particles (0.0015% β-CN, Csilica ≤ 0.15%) were dragged to the periphery of the thin liquid films but no decrease of the inner film draining rate by a decrease of capilary pressure gradient across the film was observed. The depletion of β-casein in the bulk by particles played a major role in foam destabilization.